Re: [PATCH for-5.8 2/2] usb: dwc3: meson-g12a: fix USB2 PHY initialization on G12A and A1 SoCs

[Neil Armstrong]

Hi Martin,

On 26/05/2020 22:29, Martin Blumenstingl wrote:
> dwc3_meson_g12a_usb2_init_phy() crashes with NULL pointer on an SM1
> board (which uses the same USB setup as G12A) dereference as reported
> by the Kernel CI bot. This is because of the following call flow:
>   dwc3_meson_g12a_probe
>     priv->drvdata->setup_regmaps
>       dwc3_meson_g12a_setup_regmaps
>         priv->usb2_ports is still 0 so priv->u2p_regmap[i] will be NULL
>     dwc3_meson_g12a_get_phys
>       initializes priv->usb2_ports
>     priv->drvdata->usb_init
>       dwc3_meson_g12a_usb_init
>         dwc3_meson_g12a_usb_init_glue
>           dwc3_meson_g12a_usb2_init
>             priv->drvdata->usb2_init_phy
>               dwc3_meson_g12a_usb2_init_phy
>                 dereferences priv->u2p_regmap[i]
> 
> Call priv->drvdata->setup_regmaps only after dwc3_meson_g12a_get_phys so
> priv->usb2_ports is initialized and the regmaps will be set up
> correctly. This fixes the NULL dereference later on.
> 
> Fixes: 013af227f58a97 ("usb: dwc3: meson-g12a: handle the phy and glue registers separately")
> Reported-by: "kernelci.org bot" <bot@xxxxxxxxxxxx>
> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx>
> ---
>  drivers/usb/dwc3/dwc3-meson-g12a.c | 8 ++++----
>  1 file changed, 4 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/usb/dwc3/dwc3-meson-g12a.c b/drivers/usb/dwc3/dwc3-meson-g12a.c
> index ce5388338389..1f7f4d88ed9d 100644
> --- a/drivers/usb/dwc3/dwc3-meson-g12a.c
> +++ b/drivers/usb/dwc3/dwc3-meson-g12a.c

[...]

Fixes regression reported at [1] on SEI510 board based on Amlogic G12A.

Felipe, Greg, can this be queued on uxb-next for 5.8 ?

Acked-by: Neil Armstrong <narmstron@xxxxxxxxxxxx>

Thanks,
Neil

[1] http://lore.kernel.org/r/ffe2c64c-62ed-9b59-3754-7ede0f0203be@xxxxxxxxxxxxx