Re: [PATCH for-5.8 2/2] usb: dwc3: meson-g12a: fix USB2 PHY initialization on G12A and A1 SoCs
From: Greg KH
Date: Wed May 27 2020 - 04:53:20 EST
On Wed, May 27, 2020 at 10:17:31AM +0200, Neil Armstrong wrote:
> Hi Martin,
>
> On 26/05/2020 22:29, Martin Blumenstingl wrote:
> > dwc3_meson_g12a_usb2_init_phy() crashes with NULL pointer on an SM1
> > board (which uses the same USB setup as G12A) dereference as reported
> > by the Kernel CI bot. This is because of the following call flow:
> > dwc3_meson_g12a_probe
> > priv->drvdata->setup_regmaps
> > dwc3_meson_g12a_setup_regmaps
> > priv->usb2_ports is still 0 so priv->u2p_regmap[i] will be NULL
> > dwc3_meson_g12a_get_phys
> > initializes priv->usb2_ports
> > priv->drvdata->usb_init
> > dwc3_meson_g12a_usb_init
> > dwc3_meson_g12a_usb_init_glue
> > dwc3_meson_g12a_usb2_init
> > priv->drvdata->usb2_init_phy
> > dwc3_meson_g12a_usb2_init_phy
> > dereferences priv->u2p_regmap[i]
> >
> > Call priv->drvdata->setup_regmaps only after dwc3_meson_g12a_get_phys so
> > priv->usb2_ports is initialized and the regmaps will be set up
> > correctly. This fixes the NULL dereference later on.
> >
> > Fixes: 013af227f58a97 ("usb: dwc3: meson-g12a: handle the phy and glue registers separately")
> > Reported-by: "kernelci.org bot" <bot@xxxxxxxxxxxx>
> > Signed-off-by: Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx>
> > ---
> > drivers/usb/dwc3/dwc3-meson-g12a.c | 8 ++++----
> > 1 file changed, 4 insertions(+), 4 deletions(-)
> >
> > diff --git a/drivers/usb/dwc3/dwc3-meson-g12a.c b/drivers/usb/dwc3/dwc3-meson-g12a.c
> > index ce5388338389..1f7f4d88ed9d 100644
> > --- a/drivers/usb/dwc3/dwc3-meson-g12a.c
> > +++ b/drivers/usb/dwc3/dwc3-meson-g12a.c
>
> [...]
>
> Fixes regression reported at [1] on SEI510 board based on Amlogic G12A.
>
> Felipe, Greg, can this be queued on uxb-next for 5.8 ?
>
> Acked-by: Neil Armstrong <narmstron@xxxxxxxxxxxx>
I can take this and patch 1/2 here if Felipe acks them.
thanks,
greg k-h