Re: [PATCH 0/3] MIPS: Loongson64: Initial LS7A PCH support

[Huacai Chen]

Hi, Jiaxun,

On Fri, May 29, 2020 at 11:45 AM Jiaxun Yang <jiaxun.yang@xxxxxxxxxxx> wrote:
>
> With this series, LS7A and Loongson-3A4000 is finally supported
> note that this series should depend on irqchip support[1], which
> is likely to get merged soon.
>
> Thanks.
>
> [1]: https://lkml.org/lkml/2020/5/16/72
>
> Jiaxun Yang (3):
>   dt-bindings: mips: Document two Loongson generic boards
>   MIPS: Loongson64: DeviceTree for LS7A PCH
>   MIPS: Loongson64:Load LS7A dtbs
>
>  .../bindings/mips/loongson/devices.yaml       |   8 +
>  arch/mips/boot/dts/loongson/Makefile          |   5 +-
>  .../dts/loongson/loongson3-r4-package.dtsi    |  74 +++++++
>  .../dts/loongson/loongson3_4core_ls7a.dts     |  25 +++
>  .../boot/dts/loongson/loongson3_r4_ls7a.dts   |  10 +
>  arch/mips/boot/dts/loongson/ls7a-pch.dtsi     | 185 ++++++++++++++++++
>  .../asm/mach-loongson64/builtin_dtbs.h        |   2 +
>  arch/mips/loongson64/env.c                    |  56 +++---
>  8 files changed, 342 insertions(+), 23 deletions(-)
>  create mode 100644 arch/mips/boot/dts/loongson/loongson3-r4-package.dtsi
>  create mode 100644 arch/mips/boot/dts/loongson/loongson3_4core_ls7a.dts
>  create mode 100644 arch/mips/boot/dts/loongson/loongson3_r4_ls7a.dts
>  create mode 100644 arch/mips/boot/dts/loongson/ls7a-pch.dtsi
I think the naming can be like this: Old processor (Loongson 3A R1~R3)
use loongson64c_ prefix instead of loongson3, new processor (Loongson
3A R4) use loongson64g_ prefix instead of loongson3_r4, and
Loongson-2K use loongson64r_ prefix, this makes them consistent with
their PRID definitions.

>
> --
> 2.27.0.rc0
>