Re: [PATCH 01/16] ASoC: sun4i-i2s: Add support for H6 I2S

[Maxime Ripard]

Hi,

On Sat, Jul 04, 2020 at 01:38:47PM +0200, Clément Péron wrote:
> From: Jernej Skrabec <jernej.skrabec@xxxxxxxx>
> 
> H6 I2S is very similar to that in H3, except it supports up to 16
> channels.
> 
> Signed-off-by: Jernej Skrabec <jernej.skrabec@xxxxxxxx>
> Signed-off-by: Marcus Cooper <codekipper@xxxxxxxxx>
> Signed-off-by: Clément Péron <peron.clem@xxxxxxxxx>
> ---
>  sound/soc/sunxi/sun4i-i2s.c | 227 ++++++++++++++++++++++++++++++++++++
>  1 file changed, 227 insertions(+)
> 
> diff --git a/sound/soc/sunxi/sun4i-i2s.c b/sound/soc/sunxi/sun4i-i2s.c
> index d0a8d5810c0a..9690389cb68e 100644
> --- a/sound/soc/sunxi/sun4i-i2s.c
> +++ b/sound/soc/sunxi/sun4i-i2s.c
> @@ -124,6 +124,21 @@
>  #define SUN8I_I2S_RX_CHAN_SEL_REG	0x54
>  #define SUN8I_I2S_RX_CHAN_MAP_REG	0x58
>  
> +/* Defines required for sun50i-h6 support */
> +#define SUN50I_H6_I2S_TX_CHAN_SEL_OFFSET_MASK	GENMASK(21, 20)
> +#define SUN50I_H6_I2S_TX_CHAN_SEL_OFFSET(offset)	((offset) << 20)
> +#define SUN50I_H6_I2S_TX_CHAN_SEL_MASK		GENMASK(19, 16)
> +#define SUN50I_H6_I2S_TX_CHAN_SEL(chan)		((chan - 1) << 16)
> +#define SUN50I_H6_I2S_TX_CHAN_EN_MASK		GENMASK(15, 0)
> +#define SUN50I_H6_I2S_TX_CHAN_EN(num_chan)	(((1 << num_chan) - 1))
> +
> +#define SUN50I_H6_I2S_TX_CHAN_MAP0_REG	0x44
> +#define SUN50I_H6_I2S_TX_CHAN_MAP1_REG	0x48
> +
> +#define SUN50I_H6_I2S_RX_CHAN_SEL_REG	0x64
> +#define SUN50I_H6_I2S_RX_CHAN_MAP0_REG	0x68
> +#define SUN50I_H6_I2S_RX_CHAN_MAP1_REG	0x6C
> +
>  struct sun4i_i2s;
>  
>  /**
> @@ -466,6 +481,65 @@ static int sun8i_i2s_set_chan_cfg(const struct sun4i_i2s *i2s,
>  	return 0;
>  }
>  
> +static int sun50i_i2s_set_chan_cfg(const struct sun4i_i2s *i2s,
> +				   const struct snd_pcm_hw_params *params)

We should have sun50i_h6 as prefix. The A64 is also part of the sun50i
family and supported through the sun8i callbacks, so it's pretty
confusing if you don't have the soc name in there.

Maxime

Attachment: signature.asc
Description: PGP signature