[PATCH 19/25] pinctrl: pinctrl-rockchip: Fix a bunch of kerneldoc misdemeanours
From: Lee Jones
Date: Mon Jul 13 2020 - 10:50:34 EST
Demote headers which are clearly not kerneldoc, provide titles for
struct definition blocks, fix API slip (bitrot) misspellings and
provide some missing entries.
Fixes the following W=1 kernel build warning(s):
drivers/pinctrl/pinctrl-rockchip.c:82: warning: cannot understand function prototype: 'struct rockchip_iomux '
drivers/pinctrl/pinctrl-rockchip.c:97: warning: Enum value 'DRV_TYPE_IO_DEFAULT' not described in enum 'rockchip_pin_drv_type'
drivers/pinctrl/pinctrl-rockchip.c:97: warning: Enum value 'DRV_TYPE_IO_1V8_OR_3V0' not described in enum 'rockchip_pin_drv_type'
drivers/pinctrl/pinctrl-rockchip.c:97: warning: Enum value 'DRV_TYPE_IO_1V8_ONLY' not described in enum 'rockchip_pin_drv_type'
drivers/pinctrl/pinctrl-rockchip.c:97: warning: Enum value 'DRV_TYPE_IO_1V8_3V0_AUTO' not described in enum 'rockchip_pin_drv_type'
drivers/pinctrl/pinctrl-rockchip.c:97: warning: Enum value 'DRV_TYPE_IO_3V3_ONLY' not described in enum 'rockchip_pin_drv_type'
drivers/pinctrl/pinctrl-rockchip.c:97: warning: Enum value 'DRV_TYPE_MAX' not described in enum 'rockchip_pin_drv_type'
drivers/pinctrl/pinctrl-rockchip.c:106: warning: Enum value 'PULL_TYPE_IO_DEFAULT' not described in enum 'rockchip_pin_pull_type'
drivers/pinctrl/pinctrl-rockchip.c:106: warning: Enum value 'PULL_TYPE_IO_1V8_ONLY' not described in enum 'rockchip_pin_pull_type'
drivers/pinctrl/pinctrl-rockchip.c:106: warning: Enum value 'PULL_TYPE_MAX' not described in enum 'rockchip_pin_pull_type'
drivers/pinctrl/pinctrl-rockchip.c:109: warning: Cannot understand * @drv_type: drive strength variant using rockchip_perpin_drv_type
on line 109 - I thought it was a doc line
drivers/pinctrl/pinctrl-rockchip.c:122: warning: Cannot understand * @reg_base: register base of the gpio bank
on line 109 - I thought it was a doc line
drivers/pinctrl/pinctrl-rockchip.c:325: warning: Function parameter or member 'route_location' not described in 'rockchip_mux_route_data'
drivers/pinctrl/pinctrl-rockchip.c:328: warning: Cannot understand */
on line 109 - I thought it was a doc line
drivers/pinctrl/pinctrl-rockchip.c:375: warning: Function parameter or member 'data' not described in 'rockchip_pin_group'
drivers/pinctrl/pinctrl-rockchip.c:387: warning: Function parameter or member 'ngroups' not described in 'rockchip_pmx_func'
Cc: Heiko Stuebner <heiko@xxxxxxxxx>
Cc: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
Cc: linux-rockchip@xxxxxxxxxxxxxxxxxxx
Signed-off-by: Lee Jones <lee.jones@xxxxxxxxxx>
---
drivers/pinctrl/pinctrl-rockchip.c | 22 ++++++++++++----------
1 file changed, 12 insertions(+), 10 deletions(-)
diff --git a/drivers/pinctrl/pinctrl-rockchip.c b/drivers/pinctrl/pinctrl-rockchip.c
index c07324d1f2657..c96d810635ad6 100644
--- a/drivers/pinctrl/pinctrl-rockchip.c
+++ b/drivers/pinctrl/pinctrl-rockchip.c
@@ -63,7 +63,7 @@ enum rockchip_pinctrl_type {
RK3399,
};
-/**
+/*
* Encode variants of iomux registers into a type variable
*/
#define IOMUX_GPIO_ONLY BIT(0)
@@ -74,6 +74,7 @@ enum rockchip_pinctrl_type {
#define IOMUX_WIDTH_2BIT BIT(5)
/**
+ * struct rockchip_iomux
* @type: iomux variant using IOMUX_* constants
* @offset: if initialized to -1 it will be autocalculated, by specifying
* an initial offset value the relevant source offset can be reset
@@ -84,7 +85,7 @@ struct rockchip_iomux {
int offset;
};
-/**
+/*
* enum type index corresponding to rockchip_perpin_drv_list arrays index.
*/
enum rockchip_pin_drv_type {
@@ -96,7 +97,7 @@ enum rockchip_pin_drv_type {
DRV_TYPE_MAX
};
-/**
+/*
* enum type index corresponding to rockchip_pull_list arrays index.
*/
enum rockchip_pin_pull_type {
@@ -106,6 +107,7 @@ enum rockchip_pin_pull_type {
};
/**
+ * struct rockchip_drv
* @drv_type: drive strength variant using rockchip_perpin_drv_type
* @offset: if initialized to -1 it will be autocalculated, by specifying
* an initial offset value the relevant source offset can be reset
@@ -119,8 +121,9 @@ struct rockchip_drv {
};
/**
+ * struct rockchip_pin_bank
* @reg_base: register base of the gpio bank
- * @reg_pull: optional separate register for additional pull settings
+ * @regmap_pull: optional separate register for additional pull settings
* @clk: clock of the gpio bank
* @irq: interrupt of the gpio bank
* @saved_masks: Saved content of GPIO_INTEN at suspend time.
@@ -138,6 +141,8 @@ struct rockchip_drv {
* @gpio_chip: gpiolib chip
* @grange: gpio range
* @slock: spinlock for the gpio bank
+ * @toggle_edge_mode: bit mask to toggle (falling/rising) edge mode
+ * @recalced_mask: bit mask to indicate a need to recalulate the mask
* @route_mask: bits describing the routing pins of per bank
*/
struct rockchip_pin_bank {
@@ -312,6 +317,7 @@ enum rockchip_mux_route_location {
* @bank_num: bank number.
* @pin: index at register or used to calc index.
* @func: the min pin.
+ * @route_location: the mux route location (same, pmu, grf).
* @route_offset: the max pin.
* @route_val: the register offset.
*/
@@ -324,8 +330,6 @@ struct rockchip_mux_route_data {
u32 route_val;
};
-/**
- */
struct rockchip_pin_ctrl {
struct rockchip_pin_bank *pin_banks;
u32 nr_banks;
@@ -363,9 +367,7 @@ struct rockchip_pin_config {
* @name: name of the pin group, used to lookup the group.
* @pins: the pins included in this group.
* @npins: number of pins included in this group.
- * @func: the mux function number to be programmed when selected.
- * @configs: the config values to be set for each pin
- * @nconfigs: number of configs for each pin
+ * @data: local pin configuration
*/
struct rockchip_pin_group {
const char *name;
@@ -378,7 +380,7 @@ struct rockchip_pin_group {
* struct rockchip_pmx_func: represent a pin function.
* @name: name of the pin function, used to lookup the function.
* @groups: one or more names of pin groups that provide this function.
- * @num_groups: number of groups included in @groups.
+ * @ngroups: number of groups included in @groups.
*/
struct rockchip_pmx_func {
const char *name;
--
2.25.1