Re: Re: [PATCH] riscv: Setup exception vector for K210 properly
From: 邱文博
Date: Tue Aug 11 2020 - 03:06:08 EST
The serial port did not print anything after early console.
[ 0.000000] Sorting __ex_table...
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] Memory: 6480K/8192K available (1024K kernel code, 111K rwdata, 170K rodata, 101K init, 97K bss, 1712K reserved, 0K cma-reserved)
[ 0.000000] rcu: Hierarchical RCU implementation.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] riscv-intc: 64 local interrupts mapped
[ 0.000000] plic: interrupt-controller@c000000: mapped 65 interrupts with 2 handlers for 4 contexts.
[ 0.000000] random: get_random_bytes called from 0x00000000800019a4 with crng_init=0
[ 0.000000] riscv_timer_init_dt: Registering clocksource cpuid [0] hartid [0]
[ 0.000000] clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x3990be68b, max_idle_ns: 881590404272 ns
[ 0.000015] sched_clock: 64 bits at 7MHz, resolution 128ns, wraps every 4398046511054ns
[ 0.008254] Console: colour dummy device 80x25
> -----原始邮件-----
> 发件人: "Damien Le Moal" <damien.lemoal@xxxxxxx>
> 发送时间: 2020-08-11 14:42:15 (星期二)
> 收件人: "Qiu Wenbo" <qiuwenbo@xxxxxxxxxxxxxx>, "Palmer Dabbelt" <palmer@xxxxxxxxxxx>, "Paul Walmsley" <paul.walmsley@xxxxxxxxxx>, "linux-riscv@xxxxxxxxxxxxxxxxxxx" <linux-riscv@xxxxxxxxxxxxxxxxxxx>
> 抄送: "Albert Ou" <aou@xxxxxxxxxxxxxxxxx>, "Atish Patra" <atish.patra@xxxxxxx>, "Anup
> Patel" <anup@xxxxxxxxxxxxxx>, "Guo Ren" <guoren@xxxxxxxxxxxxxxxxx>, "Zong Li" <zong.li@xxxxxxxxxx>, "Greentime Hu" <greentime.hu@xxxxxxxxxx>, "Vincent Chen" <vincent.chen@xxxxxxxxxx>, "linux-kernel@xxxxxxxxxxxxxxx" <linux-kernel@xxxxxxxxxxxxxxx>
> 主题: Re: [PATCH] riscv: Setup exception vector for K210 properly
>
> On 2020/08/11 15:38, Qiu Wenbo wrote:
> > Exception vector is missing on nommu platform and it is a big issue.
> > This patch is tested in Sipeed MAIX Bit Dev Board.
> >
> > Fixes: 79b1feba5455 ("RISC-V: Setup exception vector early")
> > Signed-off-by: Qiu Wenbo <qiuwenbo@xxxxxxxxxxxxxx>
> > ---
> > arch/riscv/kernel/smpboot.c | 1 +
> > arch/riscv/kernel/traps.c | 11 ++++++++++-
> > 2 files changed, 11 insertions(+), 1 deletion(-)
> >
> > diff --git a/arch/riscv/kernel/smpboot.c b/arch/riscv/kernel/smpboot.c
> > index 356825a57551..23cde0ceb39d 100644
> > --- a/arch/riscv/kernel/smpboot.c
> > +++ b/arch/riscv/kernel/smpboot.c
> > @@ -154,6 +154,7 @@ asmlinkage __visible void smp_callin(void)
> > mmgrab(mm);
> > current->active_mm = mm;
> >
> > + trap_init();
> > notify_cpu_starting(curr_cpuid);
> > update_siblings_masks(curr_cpuid);
> > set_cpu_online(curr_cpuid, 1);
> > diff --git a/arch/riscv/kernel/traps.c b/arch/riscv/kernel/traps.c
> > index ad14f4466d92..a390239818ae 100644
> > --- a/arch/riscv/kernel/traps.c
> > +++ b/arch/riscv/kernel/traps.c
> > @@ -174,7 +174,16 @@ int is_valid_bugaddr(unsigned long pc)
> > }
> > #endif /* CONFIG_GENERIC_BUG */
> >
> > -/* stvec & scratch is already set from head.S */
> > +/* stvec & scratch is already set from head.S when mmu is enabled */
> > void trap_init(void)
> > {
> > +#ifndef CONFIG_MMU
> > + /*
> > + * Set sup0 scratch register to 0, indicating to exception vector
> > + * that we are presently executing in the kernel
> > + */
> > + csr_write(CSR_SCRATCH, 0);
> > + /* Set the exception vector address */
> > + csr_write(CSR_TVEC, &handle_exception);
> > +#endif
> > }
> >
>
> Looks OK to me. But out of curiosity, how did you trigger a problem ? I never
> got any weird exceptions with my busybox userspace.
>
> --
> Damien Le Moal
> Western Digital Research
</qiuwenbo@xxxxxxxxxxxxxx></linux-kernel@xxxxxxxxxxxxxxx></vincent.chen@xxxxxxxxxx></greentime.hu@xxxxxxxxxx></zong.li@xxxxxxxxxx></guoren@xxxxxxxxxxxxxxxxx></anup@xxxxxxxxxxxxxx></atish.patra@xxxxxxx></aou@xxxxxxxxxxxxxxxxx></linux-riscv@xxxxxxxxxxxxxxxxxxx></paul.walmsley@xxxxxxxxxx></palmer@xxxxxxxxxxx></qiuwenbo@xxxxxxxxxxxxxx></damien.lemoal@xxxxxxx>