Re: [PATCH v1 0/9] extcon: extcon-ptn5150: Add the USB external connector support

[Ramuthevar, Vadivel MuruganX]

Hi Heikki,

 Thank you very much for the review comment...

On 25/8/2020 4:19 pm, Heikki Krogerus wrote:
> On Wed, Aug 19, 2020 at 04:45:38PM +0800, Ramuthevar, Vadivel MuruganX wrote:
> > Hi Andy,
> >
> > On 19/8/2020 3:55 pm, Andy Shevchenko wrote:
> > > On Wed, Aug 19, 2020 at 8:38 AM Ramuthevar, Vadivel MuruganX
> > > <vadivel.muruganx.ramuthevar@xxxxxxxxxxxxxxx> wrote:
> > > > On 18/8/2020 4:40 pm, Andy Shevchenko wrote:
> > > > > On Tue, Aug 18, 2020 at 02:57:18PM +0800, Ramuthevar,Vadivel MuruganX wrote:
> > > > > > USB external connector chip PTN5150 used on the Intel LGM SoC
> > > > > > boards to detect the USB type and connection.
> > > > > Internally I meant you can send cleanups, but couple of patches here are the
> > > > > features and were still under discussion... But here we are.
> > > >
> > > > you mean asking us to implement the Heikki suggested as below..
> > > >
> > > > Heikki Krogerus: register the port and the partner attached to it with
> > > > the USB Type-C connector class in the driver. Is my understaanding
> > > > right? if not, please explain it. Thanks!
> > >
> > > When you mention somebody, don't forget to Cc them (now done by me).
> > Sure, Thank you
>
> So the patches 1-5 are fine. The rest needs to be rewritten.
Already Krzysztof submitted all the patches and got approved, so we 
started sending only one patch which support to Intel LGM SoC based 
boards, Thanks!

Regards
Vadivel
> thanks,