Re: [PATCH v1 0/9] extcon: extcon-ptn5150: Add the USB external connector support
From: Ramuthevar, Vadivel MuruganX
Date: Wed Aug 26 2020 - 05:44:09 EST
Hi Andy,
On 26/8/2020 5:18 pm, Andy Shevchenko wrote:
On Wed, Aug 26, 2020 at 10:51:37AM +0800, Ramuthevar, Vadivel MuruganX wrote:
On 25/8/2020 4:19 pm, Heikki Krogerus wrote:
On Wed, Aug 19, 2020 at 04:45:38PM +0800, Ramuthevar, Vadivel MuruganX wrote:
On 19/8/2020 3:55 pm, Andy Shevchenko wrote:
On Wed, Aug 19, 2020 at 8:38 AM Ramuthevar, Vadivel MuruganX
<vadivel.muruganx.ramuthevar@xxxxxxxxxxxxxxx> wrote:
On 18/8/2020 4:40 pm, Andy Shevchenko wrote:
On Tue, Aug 18, 2020 at 02:57:18PM +0800, Ramuthevar,Vadivel MuruganX wrote:
USB external connector chip PTN5150 used on the Intel LGM SoC
boards to detect the USB type and connection.
Internally I meant you can send cleanups, but couple of patches here are the
features and were still under discussion... But here we are.
you mean asking us to implement the Heikki suggested as below..
Heikki Krogerus: register the port and the partner attached to it with
the USB Type-C connector class in the driver. Is my understaanding
right? if not, please explain it. Thanks!
When you mention somebody, don't forget to Cc them (now done by me).
Sure, Thank you
So the patches 1-5 are fine. The rest needs to be rewritten.
Already Krzysztof submitted all the patches and got approved, so we started
sending only one patch which support to Intel LGM SoC based boards, Thanks!
I'm not sure what you meant by above.
Krzysztof suggested you to squash all first patches into 1 (or two) and he
approves it. What you have to do is follow his advise and send v2 where it will
be one (or two) patch with his tag attached.
Yes, you're right, the above discussion was before Krzysztof reviewed my
patches, sure will follow his advise, thanks!
Regards
Vadivel
Krzysztof, is it correct what I'm saying?