Re: [PATCH net-next + leds v2 6/7] net: phy: marvell: add support for LEDs controlled by Marvell PHYs

[Russell King - ARM Linux admin]

On Thu, Sep 10, 2020 at 08:31:54PM +0200, Andrew Lunn wrote:
> Generally the driver will default to the hardware reset blink
> pattern. There are a few PHY drivers which change this at probe, but
> not many. The silicon defaults are pretty good.

The "right" blink pattern can be a matter of how the hardware is
wired.  For example, if you have bi-colour LEDs and the PHY supports
special bi-colour mixing modes.

-- 
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTP is here! 40Mbps down 10Mbps up. Decent connectivity at last!