[PATCH] dt-bindings: tas2770: Fix I2C addresses for the TAS2770

[Dan Murphy]

The I2C addresses listed in the yaml are not correct. The addresses can
range from 0x41 through 0x48 based on register configurations. Fix the
example and the description.

Fixes: 4b7151dadfd4 ("dt-bindings: ASoC: Add tas2770 smart PA dt bindings")
Signed-off-by: Dan Murphy <dmurphy@xxxxxx>
---
 Documentation/devicetree/bindings/sound/tas2770.yaml | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/Documentation/devicetree/bindings/sound/tas2770.yaml b/Documentation/devicetree/bindings/sound/tas2770.yaml
index 33a90f829c80..bb26d081c9fa 100644
--- a/Documentation/devicetree/bindings/sound/tas2770.yaml
+++ b/Documentation/devicetree/bindings/sound/tas2770.yaml
@@ -24,7 +24,7 @@ properties:
   reg:
     maxItems: 1
     description: |
-       I2C address of the device can be one of these 0x4c, 0x4d, 0x4e or 0x4f
+       I2C address of the device can be between 0x41 to 0x48.
 
   reset-gpio:
     description: GPIO used to reset the device.
@@ -62,9 +62,9 @@ examples:
    i2c0 {
      #address-cells = <1>;
      #size-cells = <0>;
-     codec: codec@4c {
+     codec: codec@41 {
        compatible = "ti,tas2770";
-       reg = <0x4c>;
+       reg = <0x41>;
        #sound-dai-cells = <1>;
        interrupt-parent = <&gpio1>;
        interrupts = <14>;
-- 
2.28.0