Re: [PATCH] arm64: dts: marvell: espressobin: Simplify v7 ethernet port labeling

[Gregory CLEMENT]

Hi Andre,

> Now that the switch ports have a label in the .dtsi, simplify the whole
> "switch0" block for the v7 dts files.
>
> Signed-off-by: Andre Heider <a.heider@xxxxxxxxx>

Applied on mvebu/dt64

Thanks,

Gregory

> ---
>
> This goes on top of Pali's patch:
> "arm64: dts: marvell: espressobin: Add ethernet switch aliases"
>
> The resulting .dtb files are the same.
>
>  .../armada-3720-espressobin-v7-emmc.dts        | 18 +++++-------------
>  .../dts/marvell/armada-3720-espressobin-v7.dts | 18 +++++-------------
>  2 files changed, 10 insertions(+), 26 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7-emmc.dts b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7-emmc.dts
> index 215d2f702623..61d49d6a2a2a 100644
> --- a/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7-emmc.dts
> +++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7-emmc.dts
> @@ -28,20 +28,12 @@ aliases {
>  	};
>  };
>  
> -&switch0 {
> -	ports {
> -		switch0port1: port@1 {
> -			reg = <1>;
> -			label = "lan1";
> -			phy-handle = <&switch0phy0>;
> -		};
> +&switch0port1 {
> +	label = "lan1";
> +};
>  
> -		switch0port3: port@3 {
> -			reg = <3>;
> -			label = "wan";
> -			phy-handle = <&switch0phy2>;
> -		};
> -	};
> +&switch0port3 {
> +	label = "wan";
>  };
>  
>  /* U11 */
> diff --git a/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7.dts b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7.dts
> index b6f4af8ebafb..44dbe9a21cc7 100644
> --- a/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7.dts
> +++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7.dts
> @@ -27,18 +27,10 @@ aliases {
>  	};
>  };
>  
> -&switch0 {
> -	ports {
> -		switch0port1: port@1 {
> -			reg = <1>;
> -			label = "lan1";
> -			phy-handle = <&switch0phy0>;
> -		};
> +&switch0port1 {
> +	label = "lan1";
> +};
>  
> -		switch0port3: port@3 {
> -			reg = <3>;
> -			label = "wan";
> -			phy-handle = <&switch0phy2>;
> -		};
> -	};
> +&switch0port3 {
> +	label = "wan";
>  };
> -- 
> 2.28.0
>

-- 
Gregory Clement, Bootlin
Embedded Linux and Kernel engineering
http://bootlin.com