Re: [PATCH v4 2/4] dt-bindings: mmc: Add uhs-gpio for Keem Bay UHS-1 Support

From: Michal Simek
Date: Thu Oct 08 2020 - 03:37:02 EST




On 08. 10. 20 4:09, muhammad.husaini.zulkifli@xxxxxxxxx wrote:
> From: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@xxxxxxxxx>
>
> Add DT bindings of uhs-gpio for Keem Bay SOC UHS Mode Support
>
> Signed-off-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@xxxxxxxxx>
> ---
> Documentation/devicetree/bindings/mmc/arasan,sdhci.yaml | 8 +++++++-
> 1 file changed, 7 insertions(+), 1 deletion(-)
>
> diff --git a/Documentation/devicetree/bindings/mmc/arasan,sdhci.yaml b/Documentation/devicetree/bindings/mmc/arasan,sdhci.yaml
> index 58fe9d02a781..320566a673f0 100644
> --- a/Documentation/devicetree/bindings/mmc/arasan,sdhci.yaml
> +++ b/Documentation/devicetree/bindings/mmc/arasan,sdhci.yaml
> @@ -83,7 +83,7 @@ properties:
> - const: intel,keembay-sdhci-5.1-sd # Intel Keem Bay SD controller
> description:
> For this device it is strongly suggested to include
> - arasan,soc-ctl-syscon.
> + arasan,soc-ctl-syscon and uhs-gpio.
> - const: intel,keembay-sdhci-5.1-sdio # Intel Keem Bay SDIO controller
> description:
> For this device it is strongly suggested to include
> @@ -152,6 +152,11 @@ properties:
> description:
> The MIO bank number in which the command and data lines are configured.
>
> + uhs-gpio:
> + description:
> + The power mux input will be configure using the GPIO provided
> + to generate either 1.8v or 3.3v output.
> +
> dependencies:
> clock-output-names: [ '#clock-cells' ]
> '#clock-cells': [ clock-output-names ]
> @@ -300,4 +305,5 @@ examples:
> clocks = <&scmi_clk KEEM_BAY_PSS_AUX_SD0>,
> <&scmi_clk KEEM_BAY_PSS_SD0>;
> arasan,soc-ctl-syscon = <&sd0_phy_syscon>;
> + uhs-gpio = <&pca0 17 0>;
> };
>

Acked-by: Michal Simek <michal.simek@xxxxxxxxxx>

Thanks,
Michal