Re: [PATCH V3] dt-bindings: mailbox: arm,mhuv2: Add bindings

[Rob Herring]

On Fri, Oct 09, 2020 at 05:12:38PM +0530, Viresh Kumar wrote:
> This patch adds device tree binding for ARM Message Handling Unit (MHU)
> controller version 2.
> 
> Based on earlier work by Morten Borup Petersen.
> 
> Co-developed-by: Tushar Khandelwal <tushar.khandelwal@xxxxxxx>
> Signed-off-by: Tushar Khandelwal <tushar.khandelwal@xxxxxxx>
> Signed-off-by: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
> 
> ---
> V2->V3:
> 
> - compatible is changed to arm-mhuv2-tx/rx. Later version of MHUv2
>   have an interrupt in the sender mode as well and we can't find if a
>   mailbox is sender or receiver just based on an interrupt anymore. We
>   needed a better way.
> 
> - arm-mhuv2-mode is renamed to arm,mhuv2-protocols to fit the purpose
>   better.
> 
> - Minor formatting otherwise.
> 
> - No longer an RFC.
> 
> Morten: Please let me know if you want me to add your sign-off here from
> some other email id as you no longer work with ARM.
> ---
>  .../bindings/mailbox/arm,mhuv2.yaml           | 194 ++++++++++++++++++
>  1 file changed, 194 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/mailbox/arm,mhuv2.yaml
> 
> diff --git a/Documentation/devicetree/bindings/mailbox/arm,mhuv2.yaml b/Documentation/devicetree/bindings/mailbox/arm,mhuv2.yaml
> new file mode 100644
> index 000000000000..a2b8ecd639c7
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mailbox/arm,mhuv2.yaml
> @@ -0,0 +1,194 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/mailbox/arm,mhuv2.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: ARM MHUv2 Mailbox Controller
> +
> +maintainers:
> +  - Tushar Khandelwal <tushar.khandelwal@xxxxxxx>
> +  - Viresh Kumar <viresh.kumar@xxxxxxxxxx>
> +
> +description: |
> +  The Arm Message Handling Unit (MHU) Version 2 is a mailbox controller that has
> +  between 1 and 124 channel windows (each 32-bit wide) to provide unidirectional
> +  communication with remote processor(s), where the number of channel windows
> +  are implementation dependent.
> +
> +  Given the unidirectional nature of the controller, an MHUv2 mailbox may only
> +  be written to or read from. If a pair of MHU controllers is implemented
> +  between two processing elements to provide bidirectional communication, these
> +  must be specified as two separate mailboxes.
> +
> +  If the interrupts property is present in device tree node, then its treated as
> +  a "receiver" mailbox, otherwise a "sender".
> +
> +  An MHU controller must be specified along with the supported transport
> +  protocols. The transport protocols determine the method of data transmission
> +  as well as the number of provided mailbox channels.
> +
> +  Following are the possible transport protocols.
> +
> +  - Doorbell: Each transfer is made up of single bit flag, using any one of the
> +    bits in a channel window. A channel window can support up to 32 doorbells
> +    and the entire window shall be used in doorbell protocol.  Optionally, data
> +    may be transmitted through a shared memory region, wherein the MHU is used
> +    strictly as an interrupt generation mechanism but that is out of the scope
> +    of these bindings.
> +
> +  - Single-word: Each transfer is single word, using a single Channel window.
> +
> +  - Multi-word: Each transfer is made of two or more words, using two or more
> +    channel windows.
> +
> +# We need a select here so we don't match all nodes with 'arm,primecell'
> +select:
> +  properties:
> +    compatible:
> +      contains:
> +        enum:
> +          - arm,mhuv2-tx
> +          - arm,mhuv2-rx
> +  required:
> +    - compatible
> +
> +properties:
> +  compatible:
> +    oneOf:
> +      - description: Sender mode
> +        items:
> +          - const: arm,mhuv2-tx
> +          - const: arm,primecell
> +
> +      - description: Receiver-mode
> +        items:
> +          - const: arm,mhuv2-rx
> +          - const: arm,primecell
> +
> +  reg:
> +    maxItems: 1
> +
> +  interrupts:
> +    description: |
> +      The MHUv2 controller always implements an interrupt in the "receiver"
> +      mode, while the interrupt in the "sender" mode was not available in the
> +      version MHUv2.0, but the later versions do have it.
> +    maxItems: 1
> +
> +  clocks:
> +    maxItems: 1
> +
> +  clock-names:
> +    maxItems: 1
> +
> +  arm,mhuv2-protocols:
> +    $ref: /schemas/types.yaml#/definitions/uint32-matrix
> +    description: |
> +      The MHUv2 controller may contain up to 124 channel windows (each 32-bit
> +      wide). The hardware and the DT bindings allows any combination of those to
> +      be used for various transport protocols.
> +
> +      This property allows a platform to describe how these channel windows are
> +      used in various transport protocols. The entries in this property shall be
> +      present as an array of tuples, where each tuple describes details about
> +      one of the transport protocol being implemented over some channel
> +      window(s).
> +
> +      The first field of a tuple signifies the transfer protocol, 0 is reserved
> +      for doorbell protocol, 1 is reserved for single-word protocol and 2 is
> +      reserved for multi-word protocol. Using any other value in the first field
> +      of a tuple makes it invalid.
> +
> +      The second field of a tuple signifies the number of channel windows where
> +      the protocol would be used. For doorbell protocol this field signifies the
> +      number of 32-bit channel windows that implement the doorbell protocol. For
> +      single-word protocol this field signifies the number of 32-bit channel
> +      windows that implement separate single-word protocol mailbox channels. For
> +      multi-word protocol this field signifies the number of channel windows
> +      used for a multi-word protocol, it should be 2 or more.
> +
> +      The total number of channel windows specified here shouldn't be more than
> +      the ones implemented by the platform, though one can specify lesser number
> +      of windows here than what the platform implements.
> +
> +      mhu: mailbox@2b1f0000 {
> +          ...
> +
> +          arm,mhuv2-protocols = <0 2>, <1 3>, <2 5>, <2 7>;
> +      }
> +
> +      The above example defines the protocols of an ARM MHUv2 mailbox
> +      controller, where a total of 17 channel windows are used. The first two
> +      windows are used in doorbell protocol (64 doorbells), the next 3 windows
> +      are (separately) used in single-word protocol, and the last two mailbox
> +      channels are used in multi-word protocol of length 5 and 7 channel
> +      windows.

I think in terms of constraints, this would be:

minItems: 1
maxItems: 124
items:
  items:
    - enum: [ 0, 1, 2 ]
    - minimum: 0
      maximum: 124


> +
> +  '#mbox-cells':
> +    description: |
> +      It contains two fields, the first field represents the channel number,
> +      which may be used in doorbell, single-word, or multi-word protocol, and
> +      the second field (only relevant in doorbell protocol, should be 0
> +      otherwise) represents the doorbell number within the 32 bit wide channel
> +      window.
> +
> +      From the example given above for the arm,mhuv2-protocols, here is how a
> +      client node can reference them.
> +
> +      mboxes = <&mhu 0 5>; // Mailbox channel 0, doorbell 5.
> +      mboxes = <&mhu 1 7>; // Mailbox channel 1, doorbell 7.
> +      mboxes = <&mhu 2 0>; // Mailbox channel 2, single-word protocol.
> +      mboxes = <&mhu 4 0>; // Mailbox channel 4, single-word protocol.
> +      mboxes = <&mhu 6 0>; // Mailbox channel 6, multi-word protocol with 7 windows.
> +
> +    const: 2
> +
> +required:
> +  - compatible
> +  - reg
> +  - '#mbox-cells'
> +  - arm,mhuv2-protocols
> +
> +additionalProperties: false
> +
> +examples:
> +  # Multiple transport protocols implemented by the mailbox controllers
> +  - |
> +    soc {
> +        #address-cells = <2>;
> +        #size-cells = <2>;
> +
> +        mhu_tx: mailbox-tx@2b1f0000 {

mailbox@...

Direction is not relevant for node name.

> +            #mbox-cells = <2>;
> +            compatible = "arm,mhuv2-tx", "arm,primecell";
> +            reg = <0 0x2b1f0000 0 0x1000>;
> +            clocks = <&clock 0>;
> +            clock-names = "apb_pclk";
> +            arm,mhuv2-protocols = <1 5>, <2 2>, <2 5>, <2 7>, <0 2>;
> +        };
> +
> +        mhu_rx: mailbox-rx@2b1f1000 {
> +            #mbox-cells = <2>;
> +            compatible = "arm,mhuv2-rx", "arm,primecell";
> +            reg = <0 0x2b1f1000 0 0x1000>;
> +            clocks = <&clock 0>;
> +            clock-names = "apb_pclk";
> +            arm,mhuv2-protocols = <1 5>, <2 7>, <0 2>;

A receiver with no interrupt? Should be conditionally required?


> +        };
> +
> +        mhu_client: scb@2e000000 {
> +            compatible = "fujitsu,mb86s70-scb-1.0";
> +            reg = <0 0x2e000000 0 0x4000>;
> +
> +            mboxes =
> +                     //single-word protocol channel 0, mhu-rx
> +                     <&mhu_rx 0 0>,
> +                     //single-word protocol channel 4, mhu-tx
> +                     <&mhu_tx 4 0>,
> +                     //multi-word protocol channel 6 with 5 windows, mhu-tx
> +                     <&mhu_tx 6 0>,
> +                     //doorbell protocol channel 9, doorbell 27, mhu-tx
> +                     <&mhu_tx 9 27>;
> +        };
> +    };
> -- 
> 2.25.0.rc1.19.g042ed3e048af
>