[PATCH 3/6] spi: dt-bindings: spi-controller: explicitly require #address-cells=<0> for slave mode
From: Zhen Lei
Date: Tue Oct 13 2020 - 12:09:18 EST
scripts/dtc/checks.c:
if (get_property(node, "spi-slave"))
spi_addr_cells = 0;
if (node_addr_cells(node) != spi_addr_cells)
FAIL(c, dti, node, "incorrect #address-cells for SPI bus");
if (node_size_cells(node) != 0)
FAIL(c, dti, node, "incorrect #size-cells for SPI bus");
The above code in check_spi_bus_bridge() require that the number of address
cells must be 0. So we should explicitly declare "#address-cells = <0>".
Signed-off-by: Zhen Lei <thunder.leizhen@xxxxxxxxxx>
---
.../devicetree/bindings/spi/spi-controller.yaml | 20 ++++++++++++++------
1 file changed, 14 insertions(+), 6 deletions(-)
diff --git a/Documentation/devicetree/bindings/spi/spi-controller.yaml b/Documentation/devicetree/bindings/spi/spi-controller.yaml
index 2b154803b181c8b..1b56d5e40f1fcde 100644
--- a/Documentation/devicetree/bindings/spi/spi-controller.yaml
+++ b/Documentation/devicetree/bindings/spi/spi-controller.yaml
@@ -20,7 +20,7 @@ properties:
pattern: "^spi(@.*|-[0-9a-f])*$"
"#address-cells":
- const: 1
+ enum: [0, 1]
"#size-cells":
const: 0
@@ -52,11 +52,19 @@ properties:
description:
The SPI controller acts as a slave, instead of a master.
-oneOf:
- - required:
- - "#address-cells"
- - required:
- - spi-slave
+allOf:
+ - if:
+ not:
+ required:
+ - spi-slave
+ then:
+ properties:
+ "#address-cells":
+ const: 1
+ else:
+ properties:
+ "#address-cells":
+ const: 0
patternProperties:
"^slave$":
--
1.8.3