Re: [PATCH v9 10/15] PCI/ERR: Limit AER resets in pcie_do_recovery()

[Bjorn Helgaas]

On Thu, Oct 15, 2020 at 05:11:08PM -0700, Sean V Kelley wrote:
> From: Sean V Kelley <sean.v.kelley@xxxxxxxxx>
> 
> In some cases a bridge may not exist as the hardware controlling may be
> handled only by firmware and so is not visible to the OS. This scenario is
> also possible in future use cases involving non-native use of RCECs by
> firmware.
> 
> Explicitly apply conditional logic around these resets by limiting them to
> Root Ports and Downstream Ports.
> 
> Link: https://lore.kernel.org/r/20201002184735.1229220-8-seanvk.dev@xxxxxxxxxxxxxxxx
> Signed-off-by: Sean V Kelley <sean.v.kelley@xxxxxxxxx>
> Signed-off-by: Bjorn Helgaas <bhelgaas@xxxxxxxxxx>
> Acked-by: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
> ---
>  drivers/pci/pcie/err.c | 31 +++++++++++++++++++++++++------
>  1 file changed, 25 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/pci/pcie/err.c b/drivers/pci/pcie/err.c
> index 8b53aecdb43d..7883c9791562 100644
> --- a/drivers/pci/pcie/err.c
> +++ b/drivers/pci/pcie/err.c
> @@ -148,13 +148,17 @@ static int report_resume(struct pci_dev *dev, void *data)
>  
>  /**
>   * pci_walk_bridge - walk bridges potentially AER affected
> - * @bridge:	bridge which may be a Port
> + * @bridge:	bridge which may be a Port, an RCEC with associated RCiEPs,
> + *		or an RCiEP associated with an RCEC
>   * @cb:		callback to be called for each device found
>   * @userdata:	arbitrary pointer to be passed to callback
>   *
>   * If the device provided is a bridge, walk the subordinate bus, including
>   * any bridged devices on buses under this bus.  Call the provided callback
>   * on each device found.
> + *
> + * If the device provided has no subordinate bus, call the callback on the
> + * device itself.
>   */
>  static void pci_walk_bridge(struct pci_dev *bridge,
>  			    int (*cb)(struct pci_dev *, void *),
> @@ -162,6 +166,8 @@ static void pci_walk_bridge(struct pci_dev *bridge,
>  {
>  	if (bridge->subordinate)
>  		pci_walk_bus(bridge->subordinate, cb, userdata);
> +	else
> +		cb(bridge, userdata);

Looks like *this* is the patch where the "no subordinate bus" case
becomes possible?  If you agree, I can just move the test here, no
need to repost.

>  }
>  
>  pci_ers_result_t pcie_do_recovery(struct pci_dev *dev,
> @@ -174,10 +180,13 @@ pci_ers_result_t pcie_do_recovery(struct pci_dev *dev,
>  
>  	/*
>  	 * Error recovery runs on all subordinates of the bridge.  If the
> -	 * bridge detected the error, it is cleared at the end.
> +	 * bridge detected the error, it is cleared at the end.  For RCiEPs
> +	 * we should reset just the RCiEP itself.
>  	 */
>  	if (type == PCI_EXP_TYPE_ROOT_PORT ||
> -	    type == PCI_EXP_TYPE_DOWNSTREAM)
> +	    type == PCI_EXP_TYPE_DOWNSTREAM ||
> +	    type == PCI_EXP_TYPE_RC_EC ||
> +	    type == PCI_EXP_TYPE_RC_END)
>  		bridge = dev;
>  	else
>  		bridge = pci_upstream_bridge(dev);
> @@ -185,6 +194,12 @@ pci_ers_result_t pcie_do_recovery(struct pci_dev *dev,
>  	pci_dbg(bridge, "broadcast error_detected message\n");
>  	if (state == pci_channel_io_frozen) {
>  		pci_walk_bridge(bridge, report_frozen_detected, &status);
> +		if (type == PCI_EXP_TYPE_RC_END) {
> +			pci_warn(dev, "subordinate device reset not possible for RCiEP\n");
> +			status = PCI_ERS_RESULT_NONE;
> +			goto failed;
> +		}
> +
>  		status = reset_subordinates(bridge);
>  		if (status != PCI_ERS_RESULT_RECOVERED) {
>  			pci_warn(bridge, "subordinate device reset failed\n");
> @@ -217,9 +232,13 @@ pci_ers_result_t pcie_do_recovery(struct pci_dev *dev,
>  	pci_dbg(bridge, "broadcast resume message\n");
>  	pci_walk_bridge(bridge, report_resume, &status);
>  
> -	if (pcie_aer_is_native(bridge))
> -		pcie_clear_device_status(bridge);
> -	pci_aer_clear_nonfatal_status(bridge);
> +	if (type == PCI_EXP_TYPE_ROOT_PORT ||
> +	    type == PCI_EXP_TYPE_DOWNSTREAM ||
> +	    type == PCI_EXP_TYPE_RC_EC) {
> +		if (pcie_aer_is_native(bridge))
> +			pcie_clear_device_status(bridge);
> +		pci_aer_clear_nonfatal_status(bridge);
> +	}
>  	pci_info(bridge, "device recovery successful\n");
>  	return status;
>  
> -- 
> 2.28.0
>