Re: [PATCH v3 3/3] ARM: dts: add Van der Laan LANMCU board

[Krzysztof Kozlowski]

On Thu, Oct 22, 2020 at 09:35:45AM +0200, Oleksij Rempel wrote:
> Van der Laan LANMCU is a module for the food storage rooms to control
> proper gas composition.
> 
> Co-Developed-by: Robin van der Gracht <robin@xxxxxxxxxxx>
> Signed-off-by: Robin van der Gracht <robin@xxxxxxxxxxx>
> Signed-off-by: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
> Reviewed-by: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
> ---
>  arch/arm/boot/dts/Makefile          |   1 +
>  arch/arm/boot/dts/imx6dl-lanmcu.dts | 469 ++++++++++++++++++++++++++++
>  2 files changed, 470 insertions(+)
>  create mode 100644 arch/arm/boot/dts/imx6dl-lanmcu.dts
> 
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index 2289a28c0ff6..dc2543a7b7e9 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -447,6 +447,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
>  	imx6dl-icore.dtb \
>  	imx6dl-icore-mipi.dtb \
>  	imx6dl-icore-rqs.dtb \
> +	imx6dl-lanmcu.dtb \
>  	imx6dl-mamoj.dtb \
>  	imx6dl-nit6xlite.dtb \
>  	imx6dl-nitrogen6x.dtb \
> diff --git a/arch/arm/boot/dts/imx6dl-lanmcu.dts b/arch/arm/boot/dts/imx6dl-lanmcu.dts
> new file mode 100644
> index 000000000000..bda2c7a304ba
> --- /dev/null
> +++ b/arch/arm/boot/dts/imx6dl-lanmcu.dts
> @@ -0,0 +1,469 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later
> +/*
> + * Copyright (c) 2019 Protonic Holland
> + * Copyright (c) 2020 Oleksij Rempel <kernel@xxxxxxxxxxxxxx>, Pengutronix
> + */
> +

[...]

> +	pinctrl_usdhc3: usdhc3grp {
> +		fsl,pins = <
> +			MX6QDL_PAD_SD3_CMD__SD3_CMD			0x17099
> +			MX6QDL_PAD_SD3_CLK__SD3_CLK			0x10099
> +			MX6QDL_PAD_SD3_DAT0__SD3_DATA0			0x17099
> +			MX6QDL_PAD_SD3_DAT1__SD3_DATA1			0x17099
> +			MX6QDL_PAD_SD3_DAT2__SD3_DATA2			0x17099
> +			MX6QDL_PAD_SD3_DAT3__SD3_DATA3			0x17099
> +			MX6QDL_PAD_SD3_DAT4__SD3_DATA4			0x17099
> +			MX6QDL_PAD_SD3_DAT5__SD3_DATA5			0x17099
> +			MX6QDL_PAD_SD3_DAT6__SD3_DATA6			0x17099
> +			MX6QDL_PAD_SD3_DAT7__SD3_DATA7			0x17099
> +			MX6QDL_PAD_SD3_RST__SD3_RESET			0x1b0b1
> +		>;
> +	};
> +
> +	pinctrl_wifi_npd: wifinpd {

I missed this one last time, I am sorry. The dtschema for IMX requires
pinctrl groups to end with "grp", so "wifinpdgrp" or just "wifigrp".

Best regards,
Krzysztof