Re: [PATCH 2/6] media: camss: ispif: Correctly reset based on the VFE ID

From: AngeloGioacchino Del Regno
Date: Thu Oct 22 2020 - 13:09:14 EST

Next message: Tony Krowiak: "[PATCH v11 01/14] s390/vfio-ap: No need to disable IRQ after queue reset"
Previous message: Rob Clark: "Re: [PATCH] arm64: dts: qcom: sc7180: Fix number of interconnect cells"
In reply to: Robert Foss: "Re: [PATCH 2/6] media: camss: ispif: Correctly reset based on the VFE ID"
Next in thread: Robert Foss: "Re: [PATCH 0/6] Add support for SDM630/660 Camera Subsystem"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

Il giorno mar 20 ott 2020 alle ore 11:03 Robert Foss
<robert.foss@xxxxxxxxxx> ha scritto:
>
> I found a build issue in this commit.
>
>
> On Tue, 20 Oct 2020 at 10:59, Robert Foss <robert.foss@xxxxxxxxxx> wrote:
> >
> > Nice catch! This patch looks good to me.
> >
Thank you! :)))

> > Signed-off-by: Robert Foss <robert.foss@xxxxxxxxxx>
> >
> > On Sun, 18 Oct 2020 at 14:54, <kholk11@xxxxxxxxx> wrote:
> > >
> > > From: AngeloGioacchino Del Regno <kholk11@xxxxxxxxx>
> > >
> > > Resetting the ISPIF VFE0 context is wrong if we are using the VFE1
> > > for dual-camera or simply because a secondary camera is connected
> > > to it: in this case the reset will always happen on the VFE0 ctx
> > > of the ISPIF, which is .. useless.
> > >
> > > Fix this usecase by adding the ISPIF_RST_CMD_1 address and choose
> > > where to do the (or what to) reset based on the VFE line id.
> > >
> > > Signed-off-by: AngeloGioacchino Del Regno <kholk11@xxxxxxxxx>
> > > ---
> > > .../media/platform/qcom/camss/camss-ispif.c | 87 ++++++++++++-------
> > > .../media/platform/qcom/camss/camss-ispif.h | 2 +-
> > > 2 files changed, 57 insertions(+), 32 deletions(-)
> > >
> > > diff --git a/drivers/media/platform/qcom/camss/camss-ispif.c b/drivers/media/platform/qcom/camss/camss-ispif.c
> > > index db94cfd6c508..252db6b33dab 100644
> > > --- a/drivers/media/platform/qcom/camss/camss-ispif.c
> > > +++ b/drivers/media/platform/qcom/camss/camss-ispif.c
> > > @@ -26,6 +26,7 @@
> > > #define MSM_ISPIF_NAME "msm_ispif"
> > >
> > > #define ISPIF_RST_CMD_0 0x008
> > > +#define ISPIF_RST_CMD_1 0x00c
> > > #define ISPIF_RST_CMD_0_STROBED_RST_EN (1 << 0)
> > > #define ISPIF_RST_CMD_0_MISC_LOGIC_RST (1 << 1)
> > > #define ISPIF_RST_CMD_0_SW_REG_RST (1 << 2)
> > > @@ -179,7 +180,10 @@ static irqreturn_t ispif_isr_8x96(int irq, void *dev)
> > > writel(0x1, ispif->base + ISPIF_IRQ_GLOBAL_CLEAR_CMD);
> > >
> > > if ((value0 >> 27) & 0x1)
> > > - complete(&ispif->reset_complete);
> > > + complete(&ispif->reset_complete[0]);
> > > +
> > > + if ((value3 >> 27) & 0x1)
> > > + complete(&ispif->reset_complete[1]);
> > >
> > > if (unlikely(value0 & ISPIF_VFE_m_IRQ_STATUS_0_PIX0_OVERFLOW))
> > > dev_err_ratelimited(to_device(ispif), "VFE0 pix0 overflow\n");
> > > @@ -237,7 +241,7 @@ static irqreturn_t ispif_isr_8x16(int irq, void *dev)
> > > writel(0x1, ispif->base + ISPIF_IRQ_GLOBAL_CLEAR_CMD);
> > >
> > > if ((value0 >> 27) & 0x1)
> > > - complete(&ispif->reset_complete);
> > > + complete(&ispif->reset_complete[0]);
> > >
> > > if (unlikely(value0 & ISPIF_VFE_m_IRQ_STATUS_0_PIX0_OVERFLOW))
> > > dev_err_ratelimited(to_device(ispif), "VFE0 pix0 overflow\n");
> > > @@ -257,33 +261,17 @@ static irqreturn_t ispif_isr_8x16(int irq, void *dev)
> > > return IRQ_HANDLED;
> > > }
> > >
> > > -/*
> > > - * ispif_reset - Trigger reset on ISPIF module and wait to complete
> > > - * @ispif: ISPIF device
> > > - *
> > > - * Return 0 on success or a negative error code otherwise
> > > - */
> > > -static int ispif_reset(struct ispif_device *ispif)
> > > +static int ispif_vfe_reset(struct ispif_device *ispif, u8 vfe_id)
> > > {
> > > - unsigned long time;
> > > u32 val;
> > > - int ret;
> > > -
> > > - ret = camss_pm_domain_on(to_camss(ispif), PM_DOMAIN_VFE0);
> > > - if (ret < 0)
> > > - return ret;
> > >
> > > - ret = camss_pm_domain_on(to_camss(ispif), PM_DOMAIN_VFE1);
> > > - if (ret < 0)
> > > - return ret;
> > > -
> > > - ret = camss_enable_clocks(ispif->nclocks_for_reset,
> > > - ispif->clock_for_reset,
> > > - to_device(ispif));
> > > - if (ret < 0)
> > > - return ret;
> > > + if (vfe_id > (to_camss(ispif)->vfe_num - 1)) {
> > > + dev_err(to_device(ispif),
> > > + "Error: asked reset for invalid VFE%d\n", vfe_id);
> > > + return -ENOENT;
> > > + }
> > >
> > > - reinit_completion(&ispif->reset_complete);
> > > + reinit_completion(&ispif->reset_complete[vfe_id]);
> > >
> > > val = ISPIF_RST_CMD_0_STROBED_RST_EN |
> > > ISPIF_RST_CMD_0_MISC_LOGIC_RST |
> > > @@ -303,15 +291,51 @@ static int ispif_reset(struct ispif_device *ispif)
> > > ISPIF_RST_CMD_0_RDI_OUTPUT_1_MISR_RST |
> > > ISPIF_RST_CMD_0_RDI_OUTPUT_2_MISR_RST;
> > >
> > > - writel_relaxed(val, ispif->base + ISPIF_RST_CMD_0);
> > > + if (vfe_id == 1)
> > > + writel_relaxed(val, ispif->base + ISPIF_RST_CMD_1);
> > > + else
> > > + writel_relaxed(val, ispif->base + ISPIF_RST_CMD_0);
> > >
> > > - time = wait_for_completion_timeout(&ispif->reset_complete,
> > > + time = wait_for_completion_timeout(&ispif->reset_complete[vfe_id],
>
> 'time' is not a variable that exists in this scope, so the build fails.
>
Sorry about that, it looks like I've messed up a fix for that and it
went into another
unrelated commit instead of this one.
In V2 it's definitely going to be moved here.

> > > msecs_to_jiffies(ISPIF_RESET_TIMEOUT_MS));
> > > if (!time) {
> > > - dev_err(to_device(ispif), "ISPIF reset timeout\n");
> > > - ret = -EIO;
> > > + dev_err(to_device(ispif),
> > > + "ISPIF for VFE%d reset timeout\n", vfe_id);
> > > + return -EIO;
> > > }
> > >
> > > + return 0;
> > > +}
> > > +
> > > +/*
> > > + * ispif_reset - Trigger reset on ISPIF module and wait to complete
> > > + * @ispif: ISPIF device
> > > + *
> > > + * Return 0 on success or a negative error code otherwise
> > > + */
> > > +static int ispif_reset(struct ispif_device *ispif, u8 vfe_id)
> > > +{
> > > + unsigned long time;
> > > + int ret;
> > > +
> > > + ret = camss_pm_domain_on(to_camss(ispif), PM_DOMAIN_VFE0);
> > > + if (ret < 0)
> > > + return ret;
> > > +
> > > + ret = camss_pm_domain_on(to_camss(ispif), PM_DOMAIN_VFE1);
> > > + if (ret < 0)
> > > + return ret;
> > > +
> > > + ret = camss_enable_clocks(ispif->nclocks_for_reset,
> > > + ispif->clock_for_reset,
> > > + to_device(ispif));
> > > + if (ret < 0)
> > > + return ret;
> > > +
> > > + ret = ispif_vfe_reset(ispif, vfe_id);
> > > + if (ret)
> > > + dev_dbg(to_device(ispif), "ISPIF Reset failed\n");
> > > +
> > > camss_disable_clocks(ispif->nclocks_for_reset, ispif->clock_for_reset);
> > >
> > > camss_pm_domain_off(to_camss(ispif), PM_DOMAIN_VFE0);
> > > @@ -355,7 +379,7 @@ static int ispif_set_power(struct v4l2_subdev *sd, int on)
> > > goto exit;
> > > }
> > >
> > > - ret = ispif_reset(ispif);
> > > + ret = ispif_reset(ispif, line->vfe_id);
> > > if (ret < 0) {
> > > pm_runtime_put_sync(dev);
> > > camss_disable_clocks(ispif->nclocks, ispif->clock);
> > > @@ -1192,7 +1216,8 @@ int msm_ispif_subdev_init(struct ispif_device *ispif,
> > >
> > > mutex_init(&ispif->config_lock);
> > >
> > > - init_completion(&ispif->reset_complete);
> > > + for (i = 0; i < MSM_ISPIF_VFE_NUM; i++)
> > > + init_completion(&ispif->reset_complete[i]);
> > >
> > > return 0;
> > > }
> > > diff --git a/drivers/media/platform/qcom/camss/camss-ispif.h b/drivers/media/platform/qcom/camss/camss-ispif.h
> > > index 1a5ba2425a42..4132174f7ea1 100644
> > > --- a/drivers/media/platform/qcom/camss/camss-ispif.h
> > > +++ b/drivers/media/platform/qcom/camss/camss-ispif.h
> > > @@ -56,7 +56,7 @@ struct ispif_device {
> > > int nclocks;
> > > struct camss_clock *clock_for_reset;
> > > int nclocks_for_reset;
> > > - struct completion reset_complete;
> > > + struct completion reset_complete[MSM_ISPIF_VFE_NUM];
> > > int power_count;
> > > struct mutex power_lock;
> > > struct ispif_intf_cmd_reg intf_cmd[MSM_ISPIF_VFE_NUM];
> > > --
> > > 2.28.0
> > >

Regards,
Angelo

Next message: Tony Krowiak: "[PATCH v11 01/14] s390/vfio-ap: No need to disable IRQ after queue reset"
Previous message: Rob Clark: "Re: [PATCH] arm64: dts: qcom: sc7180: Fix number of interconnect cells"
In reply to: Robert Foss: "Re: [PATCH 2/6] media: camss: ispif: Correctly reset based on the VFE ID"
Next in thread: Robert Foss: "Re: [PATCH 0/6] Add support for SDM630/660 Camera Subsystem"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]