[PATCH net-next 1/2] net: phy: realtek: Add phy ids for RTL8226-CG/RTL8226B-CG

[Willy Liu]

Realtek single-port 2.5Gbps Ethernet PHY ids as below:
RTL8226-CG: 0x001cc800(ES)/0x001cc838(MP)
RTL8226B-CG/RTL8221B-CG: 0x001cc840(ES)/0x001cc848(MP)
ES: engineer sample
MP: mass production

Since above PHYs are already in mass production stage,
mass production id should be added.

Signed-off-by: Willy Liu <willy.liu@xxxxxxxxxxx>
---
 drivers/net/phy/realtek.c | 18 ++++++++++++++----
 1 file changed, 14 insertions(+), 4 deletions(-)
 mode change 100644 => 100755 drivers/net/phy/realtek.c

diff --git a/drivers/net/phy/realtek.c b/drivers/net/phy/realtek.c
old mode 100644
new mode 100755
index fb1db71..988f075
--- a/drivers/net/phy/realtek.c
+++ b/drivers/net/phy/realtek.c
@@ -57,6 +57,9 @@
 #define RTLGEN_SPEED_MASK			0x0630
 
 #define RTL_GENERIC_PHYID			0x001cc800
+#define RTL_8226_MP_PHYID			0x001cc838
+#define RTL_8221B_ES_PHYID			0x001cc840
+#define RTL_8221B_MP_PHYID			0x001cc848
 
 MODULE_DESCRIPTION("Realtek PHY driver");
 MODULE_AUTHOR("Johnson Leung");
@@ -533,10 +536,17 @@ static int rtlgen_match_phy_device(struct phy_device *phydev)
 
 static int rtl8226_match_phy_device(struct phy_device *phydev)
 {
-	return phydev->phy_id == RTL_GENERIC_PHYID &&
+	return (phydev->phy_id == RTL_GENERIC_PHYID) ||
+	       (phydev->phy_id == RTL_8226_MP_PHYID) &&
 	       rtlgen_supports_2_5gbps(phydev);
 }
 
+static int rtl8221b_match_phy_device(struct phy_device *phydev)
+{
+	return (phydev->phy_id == RTL_8221B_ES_PHYID) ||
+	       (phydev->phy_id == RTL_8221B_MP_PHYID);
+}
+
 static int rtlgen_resume(struct phy_device *phydev)
 {
 	int ret = genphy_resume(phydev);
@@ -636,7 +646,7 @@ static int rtlgen_resume(struct phy_device *phydev)
 		.read_mmd	= rtlgen_read_mmd,
 		.write_mmd	= rtlgen_write_mmd,
 	}, {
-		.name		= "RTL8226 2.5Gbps PHY",
+		.name		= "RTL8226-CG 2.5Gbps PHY",
 		.match_phy_device = rtl8226_match_phy_device,
 		.get_features	= rtl822x_get_features,
 		.config_aneg	= rtl822x_config_aneg,
@@ -648,8 +658,8 @@ static int rtlgen_resume(struct phy_device *phydev)
 		.read_mmd	= rtl822x_read_mmd,
 		.write_mmd	= rtl822x_write_mmd,
 	}, {
-		PHY_ID_MATCH_EXACT(0x001cc840),
-		.name		= "RTL8226B_RTL8221B 2.5Gbps PHY",
+		.name		= "RTL8226B-CG_RTL8221B-CG 2.5Gbps PHY",
+		.match_phy_device = rtl8221b_match_phy_device,
 		.get_features	= rtl822x_get_features,
 		.config_aneg	= rtl822x_config_aneg,
 		.read_status	= rtl822x_read_status,
-- 
1.9.1