Re: [PATCH net-next 1/2] net: phy: realtek: Add phy ids for RTL8226-CG/RTL8226B-CG

[Andrew Lunn]

On Thu, Oct 29, 2020 at 08:07:57PM +0800, Willy Liu wrote:
> Realtek single-port 2.5Gbps Ethernet PHY ids as below:
> RTL8226-CG: 0x001cc800(ES)/0x001cc838(MP)
> RTL8226B-CG/RTL8221B-CG: 0x001cc840(ES)/0x001cc848(MP)
> ES: engineer sample
> MP: mass production
> 
> Since above PHYs are already in mass production stage,
> mass production id should be added.
> 
> Signed-off-by: Willy Liu <willy.liu@xxxxxxxxxxx>
> ---
>  drivers/net/phy/realtek.c | 18 ++++++++++++++----
>  1 file changed, 14 insertions(+), 4 deletions(-)
>  mode change 100644 => 100755 drivers/net/phy/realtek.c
> 
> diff --git a/drivers/net/phy/realtek.c b/drivers/net/phy/realtek.c
> old mode 100644
> new mode 100755
> index fb1db71..988f075
> --- a/drivers/net/phy/realtek.c
> +++ b/drivers/net/phy/realtek.c
> @@ -57,6 +57,9 @@
>  #define RTLGEN_SPEED_MASK			0x0630
>  
>  #define RTL_GENERIC_PHYID			0x001cc800
> +#define RTL_8226_MP_PHYID			0x001cc838
> +#define RTL_8221B_ES_PHYID			0x001cc840
> +#define RTL_8221B_MP_PHYID			0x001cc848
>  
>  MODULE_DESCRIPTION("Realtek PHY driver");
>  MODULE_AUTHOR("Johnson Leung");
> @@ -533,10 +536,17 @@ static int rtlgen_match_phy_device(struct phy_device *phydev)
>  
>  static int rtl8226_match_phy_device(struct phy_device *phydev)
>  {
> -	return phydev->phy_id == RTL_GENERIC_PHYID &&
> +	return (phydev->phy_id == RTL_GENERIC_PHYID) ||
> +	       (phydev->phy_id == RTL_8226_MP_PHYID) &&
>  	       rtlgen_supports_2_5gbps(phydev);

Hi Willy

If i understand the code correctly, this match function is used
because the engineering sample did not use a proper ID? The mass
production part does, so there is no need to make use of this
hack. Please just list it as a normal PHY using PHY_ID_MATCH_EXACT().


>  }
>  
> +static int rtl8221b_match_phy_device(struct phy_device *phydev)
> +{
> +	return (phydev->phy_id == RTL_8221B_ES_PHYID) ||
> +	       (phydev->phy_id == RTL_8221B_MP_PHYID);
> +}

Again, these appear to be well defined ID, so just list them in the
normal ways.

       Andrew