Re: [RESEND PATCH v3 1/4] dt-bindings: connector: add power-opmode optional property to usb-connector

[Jun Li]

Amelie DELAUNAY <amelie.delaunay@xxxxxx> 于2020年10月30日周五 上午12:52写道：
>
>
>
> On 10/29/20 4:40 PM, Rob Herring wrote:
> > On Thu, Oct 29, 2020 at 10:58:03AM +0100, Amelie Delaunay wrote:
> >> Power operation mode may depends on hardware design, so, add the optional
> >> property power-opmode for usb-c connector to select the power operation
> >> mode capability.
> >>
> >> Signed-off-by: Amelie Delaunay <amelie.delaunay@xxxxxx>
> >> ---
> >>   .../bindings/connector/usb-connector.yaml      | 18 ++++++++++++++++++
> >>   1 file changed, 18 insertions(+)
> >>
> >> diff --git a/Documentation/devicetree/bindings/connector/usb-connector.yaml b/Documentation/devicetree/bindings/connector/usb-connector.yaml
> >> index 728f82db073d..200d19c60fd5 100644
> >> --- a/Documentation/devicetree/bindings/connector/usb-connector.yaml
> >> +++ b/Documentation/devicetree/bindings/connector/usb-connector.yaml
> >> @@ -93,6 +93,24 @@ properties:
> >>         - device
> >>         - dual
> >>
> >> +  power-opmode:
> >
> > I've acked this version:
> >
> > https://lore.kernel.org/r/20201020093627.256885-2-badhri@xxxxxxxxxx

That is a different property only for FRS.

> >
>
> frs is used for Fast Role Swap defined in USB PD spec.
> I understand it allows to get the same information but I'm wondering why
> the property name is limited to -frs- in this case. What about a
> non-power delivery USB-C connector ?

It's only for FRS, FRS is in the scope of power delivery.

>
> Moreover, power-opmode property support is already merged in typec class:
> https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/drivers/usb/typec/class.c?h=v5.10-rc1&id=12f3467b0d28369d3add7a0deb65fdac9b503c90
> and stusb160x driver uses it :(
>
> So, do I need to modify stusb160x driver (and bindings) to take into
> account this USB PD specific property?

Only Type-C w/o PD need this "power-opmode" property, so this
property is still required.

Li Jun

>
> Regards,
> Amelie
>
> > Please ack it if you are okay with it.
> >
> > Rob
> >
> >
> >> +    description: Determines the power operation mode that the Type C connector
> >> +      will support and will advertise through CC pins when it has no power
> >> +      delivery support.
> >> +      - "default" corresponds to default USB voltage and current defined by the
> >> +        USB 2.0 and USB 3.2 specifications, 5V 500mA for USB 2.0 ports and
> >> +        5V 900mA or 1500mA for USB 3.2 ports in single-lane or dual-lane
> >> +        operation respectively.
> >> +      - "1.5A" and "3.0A", 5V 1.5A and 5V 3.0A respectively, as defined in USB
> >> +        Type-C Cable and Connector specification, when Power Delivery is not
> >> +        supported.
> >> +    allOf:
> >> +      - $ref: /schemas/types.yaml#definitions/string
> >> +    enum:
> >> +      - default
> >> +      - 1.5A
> >> +      - 3.0A
> >> +
> >>     # The following are optional properties for "usb-c-connector" with power
> >>     # delivery support.
> >>     source-pdos:
> >> --
> >> 2.17.1
> >>