Re: [PATCH net-next v3 1/4] ethtool: Add 10base-T1L link mode entries

[Andrew Lunn]

On Fri, Oct 30, 2020 at 12:29:47PM -0500, Dan Murphy wrote:
> Add entries for the 10base-T1L full and half duplex supported modes.
> 
> $ ethtool eth0
>         Supported ports: [ TP ]
>         Supported link modes:   10baseT1L/Half 10baseT1L/Full
>         Supported pause frame use: Symmetric Receive-only
>         Supports auto-negotiation: Yes
>         Supported FEC modes: Not reported
>         Advertised link modes:  10baseT1L/Half 10baseT1L/Full
>         Advertised pause frame use: No
>         Advertised auto-negotiation: No
>         Advertised FEC modes: Not reported
>         Speed: 10Mb/s
>         Duplex: Full
>         Auto-negotiation: on
>         Port: MII
>         PHYAD: 1
>         Transceiver: external
>         Supports Wake-on: gs
>         Wake-on: d
>         SecureOn password: 00:00:00:00:00:00
>         Current message level: 0x00000000 (0)
> 
>         Link detected: yes
> 
> Signed-off-by: Dan Murphy <dmurphy@xxxxxx>

Reviewed-by: Andrew Lunn <andrew@xxxxxxx>

    Andrew