Re: [PATCH 6/9] ARM: dts: sun8i-v3s: Add the V3s NMI IRQ controller

[Paul Kocialkowski]

Hi,

On Mon 02 Nov 20, 11:12, Maxime Ripard wrote:
> On Sat, Oct 31, 2020 at 07:21:34PM +0100, Paul Kocialkowski wrote:
> > The V3s/V3 has a NMI interrupt controller, mainly used for the AXP209.
> > Its address follows the sytsem controller block, which was previously
> > incorrectly described as spanning over 0x1000 address bytes.
> 
> Is it after, or right in the middle of it?

That's up for interpretation actually:
- The V3 datasheet mentions that System Control is 0x01C00000 --- 0x01C00FFF;
- In practice, sunxi_sram.c uses a regmap with max_reg set to 0x30 for the
  V3s/H3 so this gives us some room.

Looking at other SoCs with the same setup (take sun8i-r40 for instance),
system-control is limited to 0x30 and the NMI controller follows it.
In the case of R40, the SRAM controlled is also said to be 4K-long in the
Allwinner docs.

So all in all, this leads me to believe that the system-controller instance
stops well before 0x1c000d0 on the V3s as well. Otherwise, we should also
make the R40 consistent.

Cheers,

Paul

-- 
Developer of free digital technology and hardware support.

Website: https://www.paulk.fr/
Coding blog: https://code.paulk.fr/
Git repositories: https://git.paulk.fr/ https://git.code.paulk.fr/