[PATCH 4/9] regulator: da9121: Add device variant details and respective regmaps
From: Adam Ward
Date: Fri Nov 20 2020 - 07:15:29 EST
Add ability to probe device and validate configuration, then apply a regmap
configuration for a single or dual buck device accordingly.
Signed-off-by: Adam Ward <Adam.Ward.opensource@xxxxxxxxxxx>
---
drivers/regulator/Kconfig | 14 +-
drivers/regulator/da9121-regulator.c | 382 +++++++++++++++++++++++++++++++++--
include/linux/regulator/da9121.h | 25 +++
3 files changed, 401 insertions(+), 20 deletions(-)
create mode 100644 include/linux/regulator/da9121.h
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index 005a603..68f1bbd 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -304,13 +304,21 @@ config REGULATOR_DA9063
will be called da9063-regulator.
config REGULATOR_DA9121
- tristate "Dialog Semiconductor DA9121 regulator"
+ tristate "Dialog Semiconductor DA9121/DA9122/DA9220/DA9217/DA9130/DA9131/DA9132 regulator"
depends on I2C && OF
select REGMAP_I2C
help
Say y here to support for the Dialog Semiconductor DA9121. The
- DA9210 is a dual-phase buck converter controlled through an I2C
- interface.
+ DA9121 is a single channel dual-phase buck converter controlled
+ through an I2C interface.
+
+ DA9121 Single-channel dual-phase 10A buck converter
+ DA9130 Single-channel dual-phase 10A buck converter (Automotive)
+ DA9217 Single-channel dual-phase 6A buck converter
+ DA9122 Dual-channel single-phase 5A buck converter
+ DA9131 Dual-channel single-phase 5A buck converter (Automotive)
+ DA9220 Dual-channel single-phase 3A buck converter
+ DA9132 Dual-channel single-phase 3A buck converter (Automotive)
This driver can also be built as a module. If so, the module
will be called da9121-regulator.
diff --git a/drivers/regulator/da9121-regulator.c b/drivers/regulator/da9121-regulator.c
index 5bebdb2..76932ba 100644
--- a/drivers/regulator/da9121-regulator.c
+++ b/drivers/regulator/da9121-regulator.c
@@ -9,26 +9,18 @@
#include <linux/regmap.h>
#include <linux/err.h>
#include <linux/i2c.h>
+#include <linux/regulator/da9121.h>
+
#include "da9121-regulator.h"
/* Chip data */
struct da9121 {
struct device *dev;
+ struct regmap *regmap;
+ struct regulator_dev *rdev[DA9121_IDX_MAX];
int variant_id;
};
-#define DA9121_MIN_MV 300
-#define DA9121_MAX_MV 1900
-#define DA9121_STEP_MV 10
-#define DA9121_MIN_SEL (DA9121_MIN_MV / DA9121_STEP_MV)
-#define DA9121_N_VOLTAGES (((DA9121_MAX_MV - DA9121_MIN_MV) / DA9121_STEP_MV) \
- + 1 + DA9121_MIN_SEL)
-
-static const struct regmap_config da9121_regmap_config = {
- .reg_bits = 8,
- .val_bits = 8,
-};
-
static const struct regulator_ops da9121_buck_ops = {
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
@@ -38,10 +30,24 @@ struct da9121 {
.list_voltage = regulator_list_voltage_linear,
};
+static struct of_regulator_match da9121_matches[] = {
+ [DA9121_IDX_BUCK1] = { .name = "buck1" },
+ [DA9121_IDX_BUCK2] = { .name = "buck2" },
+};
+
+#define DA9121_MIN_MV 300
+#define DA9121_MAX_MV 1900
+#define DA9121_STEP_MV 10
+#define DA9121_MIN_SEL (DA9121_MIN_MV / DA9121_STEP_MV)
+#define DA9121_N_VOLTAGES (((DA9121_MAX_MV - DA9121_MIN_MV) / DA9121_STEP_MV) \
+ + 1 + DA9121_MIN_SEL)
+
static const struct regulator_desc da9121_reg = {
+ .id = DA9121_IDX_BUCK1,
.name = "da9121",
.of_match = "buck1",
.owner = THIS_MODULE,
+ .regulators_node = of_match_ptr("regulators"),
.ops = &da9121_buck_ops,
.type = REGULATOR_VOLTAGE,
.n_voltages = DA9121_N_VOLTAGES,
@@ -58,6 +64,349 @@ struct da9121 {
.enable_time = 20,
};
+static const struct regulator_desc da9220_reg[2] = {
+ {
+ .id = DA9121_IDX_BUCK1,
+ .name = "DA9220/DA9132 BUCK1",
+ .of_match = "buck1",
+ .owner = THIS_MODULE,
+ .regulators_node = of_match_ptr("regulators"),
+ .ops = &da9121_buck_ops,
+ .type = REGULATOR_VOLTAGE,
+ .n_voltages = DA9121_N_VOLTAGES,
+ .min_uV = DA9121_MIN_MV * 1000,
+ .uV_step = DA9121_STEP_MV * 1000,
+ .linear_min_sel = DA9121_MIN_SEL,
+ .enable_reg = DA9121_REG_BUCK_BUCK1_0,
+ .enable_mask = DA9121_MASK_BUCK_BUCKx_0_CHx_EN,
+ .vsel_reg = DA9121_REG_BUCK_BUCK1_5,
+ .vsel_mask = DA9121_MASK_BUCK_BUCKx_5_CHx_A_VOUT,
+ },
+ {
+ .id = DA9121_IDX_BUCK2,
+ .name = "DA9220/DA9132 BUCK2",
+ .of_match = "buck2",
+ .owner = THIS_MODULE,
+ .regulators_node = of_match_ptr("regulators"),
+ .ops = &da9121_buck_ops,
+ .type = REGULATOR_VOLTAGE,
+ .n_voltages = DA9121_N_VOLTAGES,
+ .min_uV = DA9121_MIN_MV * 1000,
+ .uV_step = DA9121_STEP_MV * 1000,
+ .linear_min_sel = DA9121_MIN_SEL,
+ .enable_reg = DA9xxx_REG_BUCK_BUCK2_0,
+ .enable_mask = DA9121_MASK_BUCK_BUCKx_0_CHx_EN,
+ .vsel_reg = DA9xxx_REG_BUCK_BUCK2_5,
+ .vsel_mask = DA9121_MASK_BUCK_BUCKx_5_CHx_A_VOUT,
+ }
+};
+
+static const struct regulator_desc da9122_reg[2] = {
+ {
+ .id = DA9121_IDX_BUCK1,
+ .name = "DA9122/DA9131 BUCK1",
+ .of_match = "buck1",
+ .owner = THIS_MODULE,
+ .regulators_node = of_match_ptr("regulators"),
+ .ops = &da9121_buck_ops,
+ .type = REGULATOR_VOLTAGE,
+ .n_voltages = DA9121_N_VOLTAGES,
+ .min_uV = DA9121_MIN_MV * 1000,
+ .uV_step = DA9121_STEP_MV * 1000,
+ .linear_min_sel = DA9121_MIN_SEL,
+ .enable_reg = DA9121_REG_BUCK_BUCK1_0,
+ .enable_mask = DA9121_MASK_BUCK_BUCKx_0_CHx_EN,
+ .vsel_reg = DA9121_REG_BUCK_BUCK1_5,
+ .vsel_mask = DA9121_MASK_BUCK_BUCKx_5_CHx_A_VOUT,
+ },
+ {
+ .id = DA9121_IDX_BUCK2,
+ .name = "DA9122/DA9131 BUCK2",
+ .of_match = "buck2",
+ .owner = THIS_MODULE,
+ .regulators_node = of_match_ptr("regulators"),
+ .ops = &da9121_buck_ops,
+ .type = REGULATOR_VOLTAGE,
+ .n_voltages = DA9121_N_VOLTAGES,
+ .min_uV = DA9121_MIN_MV * 1000,
+ .uV_step = DA9121_STEP_MV * 1000,
+ .linear_min_sel = DA9121_MIN_SEL,
+ .enable_reg = DA9xxx_REG_BUCK_BUCK2_0,
+ .enable_mask = DA9121_MASK_BUCK_BUCKx_0_CHx_EN,
+ .vsel_reg = DA9xxx_REG_BUCK_BUCK2_5,
+ .vsel_mask = DA9121_MASK_BUCK_BUCKx_5_CHx_A_VOUT,
+ }
+};
+
+static const struct regulator_desc da9217_reg = {
+ .id = DA9121_IDX_BUCK1,
+ .name = "DA9217 BUCK1",
+ .of_match = "buck1",
+ .owner = THIS_MODULE,
+ .regulators_node = of_match_ptr("regulators"),
+ .ops = &da9121_buck_ops,
+ .type = REGULATOR_VOLTAGE,
+ .n_voltages = DA9121_N_VOLTAGES,
+ .min_uV = DA9121_MIN_MV * 1000,
+ .uV_step = DA9121_STEP_MV * 1000,
+ .linear_min_sel = DA9121_MIN_SEL,
+ .enable_reg = DA9121_REG_BUCK_BUCK1_0,
+ .enable_mask = DA9121_MASK_BUCK_BUCKx_0_CHx_EN,
+ .vsel_reg = DA9121_REG_BUCK_BUCK1_5,
+ .vsel_mask = DA9121_MASK_BUCK_BUCKx_5_CHx_A_VOUT,
+};
+
+static const struct regulator_desc *local_da9121_regulators[][DA9121_IDX_MAX] = {
+ [DA9121_TYPE_DA9121_DA9130] = { &da9121_reg, NULL },
+ [DA9121_TYPE_DA9220_DA9132] = { &da9220_reg[0], &da9220_reg[1] },
+ [DA9121_TYPE_DA9122_DA9131] = { &da9122_reg[0], &da9122_reg[1] },
+ [DA9121_TYPE_DA9217] = { &da9217_reg, NULL },
+};
+
+/* DA9121 chip register model */
+static const struct regmap_range da9121_1ch_readable_ranges[] = {
+ regmap_reg_range(DA9121_REG_SYS_STATUS_0, DA9121_REG_SYS_MASK_3),
+ regmap_reg_range(DA9121_REG_SYS_CONFIG_2, DA9121_REG_SYS_CONFIG_3),
+ regmap_reg_range(DA9121_REG_SYS_GPIO0_0, DA9121_REG_SYS_GPIO2_1),
+ regmap_reg_range(DA9121_REG_BUCK_BUCK1_0, DA9121_REG_BUCK_BUCK1_6),
+ regmap_reg_range(DA9121_REG_OTP_DEVICE_ID, DA9121_REG_OTP_CONFIG_ID),
+};
+
+static const struct regmap_access_table da9121_1ch_readable_table = {
+ .yes_ranges = da9121_1ch_readable_ranges,
+ .n_yes_ranges = ARRAY_SIZE(da9121_1ch_readable_ranges),
+};
+
+static const struct regmap_range da9121_2ch_readable_ranges[] = {
+ regmap_reg_range(DA9121_REG_SYS_STATUS_0, DA9121_REG_SYS_MASK_3),
+ regmap_reg_range(DA9121_REG_SYS_CONFIG_2, DA9121_REG_SYS_CONFIG_3),
+ regmap_reg_range(DA9121_REG_SYS_GPIO0_0, DA9121_REG_SYS_GPIO2_1),
+ regmap_reg_range(DA9121_REG_BUCK_BUCK1_0, DA9121_REG_BUCK_BUCK1_7),
+ regmap_reg_range(DA9xxx_REG_BUCK_BUCK2_0, DA9xxx_REG_BUCK_BUCK2_7),
+ regmap_reg_range(DA9121_REG_OTP_DEVICE_ID, DA9121_REG_OTP_CONFIG_ID),
+};
+
+static const struct regmap_access_table da9121_2ch_readable_table = {
+ .yes_ranges = da9121_2ch_readable_ranges,
+ .n_yes_ranges = ARRAY_SIZE(da9121_2ch_readable_ranges),
+};
+
+static const struct regmap_range da9121_1ch_writeable_ranges[] = {
+ regmap_reg_range(DA9121_REG_SYS_EVENT_0, DA9121_REG_SYS_MASK_3),
+ regmap_reg_range(DA9121_REG_SYS_CONFIG_2, DA9121_REG_SYS_CONFIG_3),
+ regmap_reg_range(DA9121_REG_SYS_GPIO0_0, DA9121_REG_SYS_GPIO2_1),
+ regmap_reg_range(DA9121_REG_BUCK_BUCK1_0, DA9121_REG_BUCK_BUCK1_2),
+ regmap_reg_range(DA9121_REG_BUCK_BUCK1_4, DA9121_REG_BUCK_BUCK1_6),
+};
+
+static const struct regmap_access_table da9121_1ch_writeable_table = {
+ .yes_ranges = da9121_1ch_writeable_ranges,
+ .n_yes_ranges = ARRAY_SIZE(da9121_1ch_writeable_ranges),
+};
+
+static const struct regmap_range da9121_2ch_writeable_ranges[] = {
+ regmap_reg_range(DA9121_REG_SYS_EVENT_0, DA9121_REG_SYS_MASK_3),
+ regmap_reg_range(DA9121_REG_SYS_CONFIG_2, DA9121_REG_SYS_CONFIG_3),
+ regmap_reg_range(DA9121_REG_SYS_GPIO0_0, DA9121_REG_SYS_GPIO2_1),
+ regmap_reg_range(DA9121_REG_BUCK_BUCK1_0, DA9121_REG_BUCK_BUCK1_2),
+ regmap_reg_range(DA9121_REG_BUCK_BUCK1_4, DA9121_REG_BUCK_BUCK1_7),
+ regmap_reg_range(DA9xxx_REG_BUCK_BUCK2_0, DA9xxx_REG_BUCK_BUCK2_2),
+ regmap_reg_range(DA9xxx_REG_BUCK_BUCK2_4, DA9xxx_REG_BUCK_BUCK2_7),
+};
+
+static const struct regmap_access_table da9121_2ch_writeable_table = {
+ .yes_ranges = da9121_2ch_writeable_ranges,
+ .n_yes_ranges = ARRAY_SIZE(da9121_2ch_writeable_ranges),
+};
+
+
+static const struct regmap_range da9121_volatile_ranges[] = {
+ regmap_reg_range(DA9121_REG_SYS_STATUS_0, DA9121_REG_SYS_EVENT_2),
+ regmap_reg_range(DA9121_REG_SYS_GPIO0_0, DA9121_REG_SYS_GPIO2_1),
+ regmap_reg_range(DA9121_REG_BUCK_BUCK1_0, DA9121_REG_BUCK_BUCK1_6),
+};
+
+static const struct regmap_access_table da9121_volatile_table = {
+ .yes_ranges = da9121_volatile_ranges,
+ .n_yes_ranges = ARRAY_SIZE(da9121_volatile_ranges),
+};
+
+/* DA9121 regmap config for 1 channel variants */
+static struct regmap_config da9121_1ch_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+ .max_register = DA9121_REG_OTP_CONFIG_ID,
+ .rd_table = &da9121_1ch_readable_table,
+ .wr_table = &da9121_1ch_writeable_table,
+ .volatile_table = &da9121_volatile_table,
+ .cache_type = REGCACHE_RBTREE,
+};
+
+/* DA9121 regmap config for 2 channel variants */
+static struct regmap_config da9121_2ch_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+ .max_register = DA9121_REG_OTP_CONFIG_ID,
+ .rd_table = &da9121_2ch_readable_table,
+ .wr_table = &da9121_2ch_writeable_table,
+ .volatile_table = &da9121_volatile_table,
+ .cache_type = REGCACHE_RBTREE,
+};
+
+static int da9121_i2c_reg_read(struct i2c_client *client, u8 addr,
+ u8 *buf, int count)
+{
+ struct i2c_msg xfer[2];
+ int ret;
+
+ xfer[0].addr = client->addr;
+ xfer[0].flags = 0;
+ xfer[0].len = 1;
+ xfer[0].buf = &addr;
+
+ xfer[1].addr = client->addr;
+ xfer[1].flags = I2C_M_RD;
+ xfer[1].len = 1;
+ xfer[1].buf = buf;
+
+
+ ret = i2c_transfer(client->adapter, xfer, 2);
+ if (ret < 0) {
+ dev_err(&client->dev, "Device read failed: %d\n", ret);
+ return ret;
+ }
+
+ if (ret != 2) {
+ dev_err(&client->dev, "Device read failed to complete\n");
+ return -EIO;
+ }
+
+ return 0;
+}
+
+static int da9121_get_device_type(struct i2c_client *i2c, struct da9121 *chip)
+{
+ u8 device_id;
+ u8 chip_id = chip->variant_id;
+ u8 variant_id;
+ u8 variant_mrc, variant_vrc;
+ char *type;
+ const char *name;
+ bool config_match = false;
+ int ret = 0;
+
+ ret = da9121_i2c_reg_read(i2c, DA9121_REG_OTP_DEVICE_ID,
+ &device_id, 1);
+ if (ret < 0) {
+ dev_err(chip->dev, "Failed to read device ID: %d\n", ret);
+ goto error;
+ }
+
+ ret = da9121_i2c_reg_read(i2c, DA9121_REG_OTP_VARIANT_ID,
+ &variant_id, 1);
+ if (ret < 0) {
+ dev_err(chip->dev, "Cannot read chip variant ID: %d\n", ret);
+ goto error;
+ }
+
+ if (device_id != DA9121_DEVICE_ID) {
+ dev_err(chip->dev, "Invalid device ID: 0x%02x\n", device_id);
+ ret = -ENODEV;
+ goto error;
+ }
+
+ name = of_get_property(chip->dev->of_node, "compatible", NULL);
+ if (!name) {
+ dev_err(chip->dev, "Cannot get device not compatible string.\n");
+ goto error;
+ }
+
+ variant_vrc = variant_id & DA9121_MASK_OTP_VARIANT_ID_VRC;
+
+ switch (variant_vrc) {
+ case DA9121_VARIANT_VRC:
+ type = "DA9121/DA9130";
+ config_match = (chip_id == DA9121_TYPE_DA9121_DA9130);
+ break;
+ case DA9220_VARIANT_VRC:
+ type = "DA9220/DA9132";
+ config_match = (chip_id == DA9121_TYPE_DA9220_DA9132);
+ break;
+ case DA9122_VARIANT_VRC:
+ type = "DA9122/DA9131";
+ config_match = (chip_id == DA9121_TYPE_DA9122_DA9131);
+ break;
+ case DA9217_VARIANT_VRC:
+ type = "DA9217";
+ config_match = (chip_id == DA9121_TYPE_DA9217);
+ break;
+ default:
+ type = "Unknown";
+ break;
+ }
+
+ dev_info(chip->dev,
+ "Device detected (device-ID: 0x%02X, var-ID: 0x%02X, %s)\n",
+ device_id, variant_id, type);
+
+ if (!config_match) {
+ dev_err(chip->dev, "Device tree configuration '%s' does not match detected device.\n", name);
+ ret = -EINVAL;
+ goto error;
+ }
+
+ variant_mrc = (variant_id & DA9121_MASK_OTP_VARIANT_ID_MRC)
+ >> DA9121_SHIFT_OTP_VARIANT_ID_MRC;
+
+ if ((device_id == DA9121_DEVICE_ID) &&
+ (variant_mrc < DA9121_VARIANT_MRC_BASE)) {
+ dev_err(chip->dev,
+ "Cannot support variant MRC: 0x%02X\n", variant_mrc);
+ ret = -EINVAL;
+ }
+error:
+ return ret;
+}
+
+static int da9121_assign_chip_model(struct i2c_client *i2c,
+ struct da9121 *chip)
+{
+ struct regmap_config *regmap;
+ int ret = 0;
+
+ chip->dev = &i2c->dev;
+
+ ret = da9121_get_device_type(i2c, chip);
+ if (ret)
+ return ret;
+
+ switch (chip->variant_id) {
+ case DA9121_TYPE_DA9121_DA9130:
+ fallthrough;
+ case DA9121_TYPE_DA9217:
+ regmap = &da9121_1ch_regmap_config;
+ break;
+ case DA9121_TYPE_DA9122_DA9131:
+ fallthrough;
+ case DA9121_TYPE_DA9220_DA9132:
+ regmap = &da9121_2ch_regmap_config;
+ break;
+ }
+
+ /* Set these up for of_regulator_match call which may want .of_map_modes */
+ da9121_matches[0].desc = local_da9121_regulators[chip->variant_id][0];
+ da9121_matches[1].desc = local_da9121_regulators[chip->variant_id][1];
+
+ chip->regmap = devm_regmap_init_i2c(i2c, regmap);
+ if (IS_ERR(chip->regmap)) {
+ ret = PTR_ERR(chip->regmap);
+ dev_err(chip->dev, "Failed to configure a register map: %d\n",
+ ret);
+ }
+
+ return ret;
+}
+
static const struct of_device_id da9121_dt_ids[] = {
{ .compatible = "dlg,da9121", .data = (void *) DA9121_TYPE_DA9121_DA9130 },
{ .compatible = "dlg,da9130", .data = (void *) DA9121_TYPE_DA9121_DA9130 },
@@ -89,7 +438,6 @@ static int da9121_i2c_probe(struct i2c_client *i2c,
struct device *dev = &i2c->dev;
struct regulator_config config = {};
struct regulator_dev *rdev;
- struct regmap *regmap;
chip = devm_kzalloc(&i2c->dev, sizeof(struct da9121), GFP_KERNEL);
if (!chip) {
@@ -99,13 +447,13 @@ static int da9121_i2c_probe(struct i2c_client *i2c,
chip->variant_id = da9121_of_get_id(&i2c->dev);
- regmap = devm_regmap_init_i2c(i2c, &da9121_regmap_config);
- if (IS_ERR(regmap))
- return PTR_ERR(regmap);
+ ret = da9121_assign_chip_model(i2c, chip);
+ if (ret < 0)
+ goto error;
config.dev = &i2c->dev;
config.of_node = dev->of_node;
- config.regmap = regmap;
+ config.regmap = chip->regmap;
rdev = devm_regulator_register(&i2c->dev, &da9121_reg, &config);
if (IS_ERR(rdev)) {
diff --git a/include/linux/regulator/da9121.h b/include/linux/regulator/da9121.h
new file mode 100644
index 0000000..c31180d
--- /dev/null
+++ b/include/linux/regulator/da9121.h
@@ -0,0 +1,25 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * DA9121 Single-channel dual-phase 10A buck converter
+ * DA9130 Single-channel dual-phase 10A buck converter (Automotive)
+ * DA9217 Single-channel dual-phase 6A buck converter
+ * DA9122 Dual-channel single-phase 5A buck converter
+ * DA9131 Dual-channel single-phase 5A buck converter (Automotive)
+ * DA9220 Dual-channel single-phase 3A buck converter
+ * DA9132 Dual-channel single-phase 3A buck converter (Automotive)
+ *
+ * Copyright (C) 2020 Dialog Semiconductor
+ *
+ * Authors: Adam Ward, Dialog Semiconductor
+ */
+
+#ifndef __LINUX_REGULATOR_DA9121_H
+#define __LINUX_REGULATOR_DA9121_H
+
+enum {
+ DA9121_IDX_BUCK1,
+ DA9121_IDX_BUCK2,
+ DA9121_IDX_MAX
+};
+
+#endif
--
1.9.1