Re: [PATCH v4 2/4] clk: sifive: Use common name for prci configuration

[Zong Li]

On Sat, Nov 21, 2020 at 9:29 AM Palmer Dabbelt <palmer@xxxxxxxxxxx> wrote:
>
> On Wed, 11 Nov 2020 02:06:06 PST (-0800), zong.li@xxxxxxxxxx wrote:
> > Use generic name CLK_SIFIVE_PRCI instead of CLK_SIFIVE_FU540_PRCI. This
> > patch is prepared for fu740 support.
> >
> > Signed-off-by: Zong Li <zong.li@xxxxxxxxxx>
> > Reviewed-by: Palmer Dabbelt <palmerdabbelt@xxxxxxxxxx>
> > Acked-by: Palmer Dabbelt <palmerdabbelt@xxxxxxxxxx>
> > Reviewed-by: Pragnesh Patel <Pragnesh.patel@xxxxxxxxxx>
> > ---
> >  arch/riscv/Kconfig.socs     | 2 +-
> >  drivers/clk/sifive/Kconfig  | 6 +++---
> >  drivers/clk/sifive/Makefile | 2 +-
> >  3 files changed, 5 insertions(+), 5 deletions(-)
> >
> > diff --git a/arch/riscv/Kconfig.socs b/arch/riscv/Kconfig.socs
> > index 8a55f6156661..3284d5c291be 100644
> > --- a/arch/riscv/Kconfig.socs
> > +++ b/arch/riscv/Kconfig.socs
> > @@ -5,7 +5,7 @@ config SOC_SIFIVE
> >       select SERIAL_SIFIVE if TTY
> >       select SERIAL_SIFIVE_CONSOLE if TTY
> >       select CLK_SIFIVE
> > -     select CLK_SIFIVE_FU540_PRCI
> > +     select CLK_SIFIVE_PRCI
> >       select SIFIVE_PLIC
> >       help
> >         This enables support for SiFive SoC platform hardware.
> > diff --git a/drivers/clk/sifive/Kconfig b/drivers/clk/sifive/Kconfig
> > index f3b4eb9cb0f5..ab48cf7e0105 100644
> > --- a/drivers/clk/sifive/Kconfig
> > +++ b/drivers/clk/sifive/Kconfig
> > @@ -8,12 +8,12 @@ menuconfig CLK_SIFIVE
> >
> >  if CLK_SIFIVE
> >
> > -config CLK_SIFIVE_FU540_PRCI
> > -     bool "PRCI driver for SiFive FU540 SoCs"
> > +config CLK_SIFIVE_PRCI
> > +     bool "PRCI driver for SiFive SoCs"
> >       select CLK_ANALOGBITS_WRPLL_CLN28HPC
> >       help
> >         Supports the Power Reset Clock interface (PRCI) IP block found in
> > -       FU540 SoCs.  If this kernel is meant to run on a SiFive FU540 SoC,
> > +       FU540 SoCs. If this kernel is meant to run on a SiFive FU540 SoC,
>
> This just removes the double-space.  Presumably in should also remove the
> "FU540", as this clock driver will now function for multiple SiFive SOCs?
>

I'd like to list the support SoCs here, so in the third patch, I list
the FU740 in the description as well. I would remove the SoC names if
it is better by using a generic term. What do you think about that?

> >         enable this driver.
> >
> >  endif
> > diff --git a/drivers/clk/sifive/Makefile b/drivers/clk/sifive/Makefile
> > index 627effe2ece1..fe3e2cb4c4d8 100644
> > --- a/drivers/clk/sifive/Makefile
> > +++ b/drivers/clk/sifive/Makefile
> > @@ -1,4 +1,4 @@
> >  # SPDX-License-Identifier: GPL-2.0-only
> >  obj-y += sifive-prci.o
> >
> > -obj-$(CONFIG_CLK_SIFIVE_FU540_PRCI)  += fu540-prci.o
> > +obj-$(CONFIG_CLK_SIFIVE_PRCI)        += fu540-prci.o
>
> Probably best to rename the source file as well.

I added fu740-prci.c in the third patch, these two files fu740-prci.c
and fu540-prci.c hold the soc-dependent code, and sifive-prci.c is the
core of this driver.