[PATCH v2 10/18] ARM: dts: qcom: sdx55: Add QPIC NAND support

[Manivannan Sadhasivam]

Add qpic_nand node to support QPIC NAND controller on SDX55 platform.
Since there is no "aon" clock in SDX55, a dummy clock is provided.

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx>
---
 arch/arm/boot/dts/qcom-sdx55.dtsi | 22 ++++++++++++++++++++++
 1 file changed, 22 insertions(+)

diff --git a/arch/arm/boot/dts/qcom-sdx55.dtsi b/arch/arm/boot/dts/qcom-sdx55.dtsi
index 1b9b990ad0a2..1a6947753972 100644
--- a/arch/arm/boot/dts/qcom-sdx55.dtsi
+++ b/arch/arm/boot/dts/qcom-sdx55.dtsi
@@ -41,6 +41,12 @@ pll_test_clk: pll-test-clk {
 			#clock-cells = <0>;
 			clock-frequency = <400000000>;
 		};
+
+		nand_clk_dummy: nand-clk-dummy {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <32000>;
+		};
 	};
 
 	cpus {
@@ -178,6 +184,22 @@ qpic_bam: dma@1b04000 {
 			status = "disabled";
 		};
 
+		qpic_nand: nand@1b30000 {
+			compatible = "qcom,sdx55-nand";
+			reg = <0x01b30000 0x10000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&rpmhcc RPMH_QPIC_CLK>,
+				 <&nand_clk_dummy>;
+			clock-names = "core", "aon";
+
+			dmas = <&qpic_bam 0>,
+			       <&qpic_bam 1>,
+			       <&qpic_bam 2>;
+			dma-names = "tx", "rx", "cmd";
+			status = "disabled";
+		};
+
 		tcsr_mutex_block: syscon@1f40000 {
 			compatible = "syscon";
 			reg = <0x1f40000 0x20000>;
-- 
2.25.1