Re: [PATCH V3] clk: imx: Fix reparenting of UARTs not associated with sdout

[Sascha Hauer]

On Wed, Jan 20, 2021 at 05:28:13PM +0200, Abel Vesa wrote:
> On 21-01-20 16:13:05, Sascha Hauer wrote:
> > Hi Abel,
> > 
> > On Wed, Jan 20, 2021 at 04:44:54PM +0200, Abel Vesa wrote:
> > > On 21-01-18 08:00:43, Adam Ford wrote:
> > > > On Mon, Jan 18, 2021 at 6:52 AM Abel Vesa <abel.vesa@xxxxxxx> wrote:
> 
> ...
> 
> > > > 
> > > > >
> > > > > TBH, I'm against the idea of having to call consumer API from a clock provider driver.
> > > > > I'm still investigating a way of moving the uart clock control calls in drivers/serial/imx,
> > > > > where they belong.
> > > > 
> > > > That makes sense.
> > > > 
> > > 
> > > Just a thought. The uart clock used for console remains on from u-boot,
> > > so maybe it's enough to just add the CLK_IGNORE_UNUSED flag to all the
> > > uart root clocks and remove the prepare/enable calls for uart clocks 
> > > for good. I don't really have a way to test it right now, but maybe
> > > you could give it a try.
> > 
> > That would mean that UART clocks will never be disabled, regardless of
> > whether they are used for console or not. That doesn't sound very
> > appealing.
> 
> AFAIK, the only uart clock that is enabled by u-boot is the one used for
> the console. Later on, when the serial driver probes, it will enable it itself.
> 
> Unless I'm missing something, this is exactly what we need.

It might enable it, but with CLK_IGNORE_UNUSED the clock won't be
disabled again when a port is closed after usage

Sascha

-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |