Re: [PATCH v1 1/4] dt-bindings: add bindings for rk3568 clock controller
From: Johan Jonker
Date: Tue Feb 23 2021 - 05:52:01 EST
Hi Elaine,
This is a new document.
Could you convert rockchip,rk3568-cru.txt to yaml?
To get an acked-by you must include:
robh+dt@xxxxxxxxxx
devicetree@xxxxxxxxxxxxxxx
./scripts/get_maintainer.pl --noroles --norolestats --nogit-fallback
--nogit <patch>
Your patch should show up here after filtering:
https://patchwork.ozlabs.org/project/devicetree-bindings/list/
Check with:
make ARCH=arm64 dt_binding_check
DT_SCHEMA_FILES=Documentation/devicetree/bindings/pinctrl/rockchip,rk3568-cru.yaml
make ARCH=arm64 dtbs_check
DT_SCHEMA_FILES=Documentation/devicetree/bindings/pinctrl/rockchip,rk3568-cru.yaml
./scripts/checkpatch.pl --strict <patch>
On 2/23/21 10:53 AM, Elaine Zhang wrote:
> Add devicetree bindings for Rockchip cru which found on
> Rockchip SoCs.
>
> Signed-off-by: Elaine Zhang <zhangqing@xxxxxxxxxxxxxx>
> ---
> .../bindings/clock/rockchip,rk3568-cru.txt | 66 +++++++++++++++++++
> 1 file changed, 66 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/clock/rockchip,rk3568-cru.txt
>
> diff --git a/Documentation/devicetree/bindings/clock/rockchip,rk3568-cru.txt b/Documentation/devicetree/bindings/clock/rockchip,rk3568-cru.txt
> new file mode 100644
> index 000000000000..b1119aecb7c7
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/clock/rockchip,rk3568-cru.txt
> @@ -0,0 +1,66 @@
> +* Rockchip RK3568 Clock and Reset Unit
> +
> +The RK3568 clock controller generates and supplies clock to various
> +controllers within the SoC and also implements a reset controller for SoC
> +peripherals.
> +
> +Required Properties:
> +
> +- compatible: PMU for CRU should be "rockchip,rk3568-pmucru"
> +- compatible: CRU should be "rockchip,rk3568-cru"
> +- reg: physical base address of the controller and length of memory mapped
> + region.
> +- #clock-cells: should be 1.
> +- #reset-cells: should be 1.
> +
> +Optional Properties:
> +
> +- rockchip,grf: phandle to the syscon managing the "general register files"
> + If missing, pll rates are not changeable, due to the missing pll lock status.
> +
> +Each clock is assigned an identifier and client nodes can use this identifier
> +to specify the clock which they consume. All available clocks are defined as
> +preprocessor macros in the dt-bindings/clock/rk3568-cru.h headers and can be
> +used in device tree sources. Similar macros exist for the reset sources in
> +these files.
> +
> +External clocks:
> +
> +There are several clocks that are generated outside the SoC. It is expected
> +that they are defined using standard clock bindings with following
> +clock-output-names:
> + - "xin24m" - crystal input - required,
> + - "xin32k" - rtc clock - optional,
> + - "i2sx_mclkin" - external I2S clock - optional,
> + - "xin_osc0_usbphyx_g" - external USBPHY clock - optional,
> + - "xin_osc0_mipidsiphyx_g" - external MIPIDSIPHY clock - optional,
> +
> +Example: Clock controller node:
> +
> + pmucru: clock-controller@fdd00000 {
> + compatible = "rockchip,rK3568-pmucru";
> + reg = <0x0 0xfdd00000 0x0 0x1000>;
> + #clock-cells = <1>;
> + #reset-cells = <1>;
> + };
> +
> + cru: clock-controller@fdd20000 {
> + compatible = "rockchip,rK3568-cru";
> + reg = <0x0 0xfdd20000 0x0 0x1000>;
> + rockchip,grf = <&grf>;
> + #clock-cells = <1>;
> + #reset-cells = <1>;
> + };
> +
> +Example: UART controller node that consumes the clock generated by the clock
> + controller:
> +
> + uart1: serial@fe650000 {
> + compatible = "rockchip,rK3568-uart", "snps,dw-apb-uart";
> + reg = <0x0 0xfe650000 0x0 0x100>;
> + interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
> + reg-shift = <2>;
> + reg-io-width = <4>;
> + clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>;
> + clock-names = "baudclk", "apb_pclk";
> + };
>