Re: [PATCH v1 1/4] dt-bindings: add bindings for rk3568 clock controller

[Heiko Stübner]

Am Dienstag, 23. Februar 2021, 11:50:25 CET schrieb Johan Jonker:
> Hi Elaine,
> 
> This is a new document.
> Could you convert rockchip,rk3568-cru.txt to yaml?

I'll definitly second that wish for a conversion to yaml.

Having the ability to check devicetrees for correctness is
quite helpful :-)


Heiko


> To get an acked-by you must include:
> 
> robh+dt@xxxxxxxxxx
> devicetree@xxxxxxxxxxxxxxx
> 
> ./scripts/get_maintainer.pl --noroles --norolestats --nogit-fallback
> --nogit <patch>
> 
> Your patch should show up here after filtering:
> https://patchwork.ozlabs.org/project/devicetree-bindings/list/
> 
> Check with:
> 
> make ARCH=arm64 dt_binding_check
> DT_SCHEMA_FILES=Documentation/devicetree/bindings/pinctrl/rockchip,rk3568-cru.yaml
> 
> make ARCH=arm64 dtbs_check
> DT_SCHEMA_FILES=Documentation/devicetree/bindings/pinctrl/rockchip,rk3568-cru.yaml
> 
> ./scripts/checkpatch.pl --strict <patch>
> 
> 
> On 2/23/21 10:53 AM, Elaine Zhang wrote:
> > Add devicetree bindings for Rockchip cru which found on
> > Rockchip SoCs.
> > 
> > Signed-off-by: Elaine Zhang <zhangqing@xxxxxxxxxxxxxx>
> > ---
> >  .../bindings/clock/rockchip,rk3568-cru.txt    | 66 +++++++++++++++++++
> >  1 file changed, 66 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/clock/rockchip,rk3568-cru.txt
> > 
> > diff --git a/Documentation/devicetree/bindings/clock/rockchip,rk3568-cru.txt b/Documentation/devicetree/bindings/clock/rockchip,rk3568-cru.txt
> > new file mode 100644
> > index 000000000000..b1119aecb7c7
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/clock/rockchip,rk3568-cru.txt
> > @@ -0,0 +1,66 @@
> > +* Rockchip RK3568 Clock and Reset Unit
> > +
> > +The RK3568 clock controller generates and supplies clock to various
> > +controllers within the SoC and also implements a reset controller for SoC
> > +peripherals.
> > +
> > +Required Properties:
> > +
> > +- compatible: PMU for CRU should be "rockchip,rk3568-pmucru"
> > +- compatible: CRU should be "rockchip,rk3568-cru"
> > +- reg: physical base address of the controller and length of memory mapped
> > +  region.
> > +- #clock-cells: should be 1.
> > +- #reset-cells: should be 1.
> > +
> > +Optional Properties:
> > +
> > +- rockchip,grf: phandle to the syscon managing the "general register files"
> > +  If missing, pll rates are not changeable, due to the missing pll lock status.
> > +
> > +Each clock is assigned an identifier and client nodes can use this identifier
> > +to specify the clock which they consume. All available clocks are defined as
> > +preprocessor macros in the dt-bindings/clock/rk3568-cru.h headers and can be
> > +used in device tree sources. Similar macros exist for the reset sources in
> > +these files.
> > +
> > +External clocks:
> > +
> > +There are several clocks that are generated outside the SoC. It is expected
> > +that they are defined using standard clock bindings with following
> > +clock-output-names:
> > + - "xin24m" - crystal input - required,
> > + - "xin32k" - rtc clock - optional,
> > + - "i2sx_mclkin" - external I2S clock - optional,
> > + - "xin_osc0_usbphyx_g" - external USBPHY clock - optional,
> > + - "xin_osc0_mipidsiphyx_g" - external MIPIDSIPHY clock - optional,
> > +
> > +Example: Clock controller node:
> > +
> > +	pmucru: clock-controller@fdd00000 {
> > +		compatible = "rockchip,rK3568-pmucru";
> > +		reg = <0x0 0xfdd00000 0x0 0x1000>;
> > +		#clock-cells = <1>;
> > +		#reset-cells = <1>;
> > +	};
> > +
> > +	cru: clock-controller@fdd20000 {
> > +		compatible = "rockchip,rK3568-cru";
> > +		reg = <0x0 0xfdd20000 0x0 0x1000>;
> > +		rockchip,grf = <&grf>;
> > +		#clock-cells = <1>;
> > +		#reset-cells = <1>;
> > +	};
> > +
> > +Example: UART controller node that consumes the clock generated by the clock
> > +  controller:
> > +
> > +	uart1: serial@fe650000 {
> > +		compatible = "rockchip,rK3568-uart", "snps,dw-apb-uart";
> > +		reg = <0x0 0xfe650000 0x0 0x100>;
> > +		interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
> > +		reg-shift = <2>;
> > +		reg-io-width = <4>;
> > +		clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>;
> > +		clock-names = "baudclk", "apb_pclk";
> > +	};
> > 
> 
>