[PATCH v12 0/9] Add support for ipq8064 tsens

From: Ansuel Smith
Date: Fri Mar 19 2021 - 14:16:29 EST

This patchset convert msm8960 to reg_filed, use int_common instead
of a custom function and fix wrong tsens get_temp function for msm8960.
Ipq8064 SoCs tsens driver is based on 8960 tsens driver. Ipq8064 needs
to be registered as a gcc child as the tsens regs on this platform are
shared with the controller.
This is based on work and code here

* Even more fix reported by Thara
* Address comments from Thara (thx)
* Fix wrong tsens init for ver_0 (crit_trips needs to be set in tsens_register)
* Fix warning from Documentation bot
* Drop MIN and MAX THRESH and use CRIT_THRESH instead
* Fix broken documentation patch
* Rework calibrate function to use get_temp_common
* Fix wrong required in the Documentation for ipq8064
* Fix hardware bug in sensor enable function
* Fix spelling error (can't find the problem with variable misallignment)
* Rework big if-else
* Remove extra comments
* Add description about different interrupts
* Conver driver to use reg_fiedl
* Use init_common
* Drop custom set_trip and set_interrupt
* Use common set_trip and set_interrupt
* Fix bad get_temp function
* Add missing hardcoded slope
* Fix compilation error and warning reported by the bot
* Change driver to register as child instead of use phandle
* Fix dt-bindings problems

Ansuel Smith (9):
drivers: thermal: tsens: Add VER_0 tsens version
drivers: thermal: tsens: Don't hardcode sensor slope
drivers: thermal: tsens: Convert msm8960 to reg_field
drivers: thermal: tsens: Use init_common for msm8960
drivers: thermal: tsens: Fix bug in sensor enable for msm8960
drivers: thermal: tsens: Replace custom 8960 apis with generic apis
drivers: thermal: tsens: Drop unused define for msm8960
drivers: thermal: tsens: Add support for ipq8064-tsens
dt-bindings: thermal: tsens: Document ipq8064 bindings

.../bindings/thermal/qcom-tsens.yaml | 56 ++++-
drivers/thermal/qcom/tsens-8960.c | 233 +++++++++---------
drivers/thermal/qcom/tsens.c | 151 +++++++++---
drivers/thermal/qcom/tsens.h | 4 +-
4 files changed, 288 insertions(+), 156 deletions(-)