Re: [PATCH 1/2] dt-bindings: pwm: add bindings for PWM modules inside QCOM PMICs

[Rob Herring]

On Tue, 27 Apr 2021 18:22:09 +0800, Fenglin Wu wrote:
> Add bindings for QCOM PMIC PWM modules which are accessed through SPMI
> bus.
> 
> Signed-off-by: Fenglin Wu <fenglinw@xxxxxxxxxxxxxx>
> ---
>  .../devicetree/bindings/pwm/pwm-qcom.yaml          | 51 ++++++++++++++++++++++
>  1 file changed, 51 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/pwm/pwm-qcom.yaml
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:
./Documentation/devicetree/bindings/pwm/pwm-qcom.yaml:29:6: [warning] wrong indentation: expected 4 but found 5 (indentation)

dtschema/dtc warnings/errors:
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/pwm/pwm-qcom.yaml: Additional properties are not allowed ('Properties' was unexpected)
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/pwm/pwm-qcom.yaml: Additional properties are not allowed ('Properties' was unexpected)
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/pwm/pwm-qcom.yaml: 'anyOf' conditional failed, one must be fixed:
	'properties' is a required property
	'patternProperties' is a required property
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/pwm/pwm-qcom.yaml: ignoring, error in schema: 
warning: no schema found in file: ./Documentation/devicetree/bindings/pwm/pwm-qcom.yaml
Documentation/devicetree/bindings/pwm/pwm-qcom.example.dts:21.13-28: Warning (reg_format): /example-0/pwms@e800:reg: property has invalid length (4 bytes) (#address-cells == 1, #size-cells == 1)
Documentation/devicetree/bindings/pwm/pwm-qcom.example.dt.yaml: Warning (pci_device_reg): Failed prerequisite 'reg_format'
Documentation/devicetree/bindings/pwm/pwm-qcom.example.dt.yaml: Warning (pci_device_bus_num): Failed prerequisite 'reg_format'
Documentation/devicetree/bindings/pwm/pwm-qcom.example.dt.yaml: Warning (simple_bus_reg): Failed prerequisite 'reg_format'
Documentation/devicetree/bindings/pwm/pwm-qcom.example.dt.yaml: Warning (i2c_bus_reg): Failed prerequisite 'reg_format'
Documentation/devicetree/bindings/pwm/pwm-qcom.example.dt.yaml: Warning (spi_bus_reg): Failed prerequisite 'reg_format'
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/pwm/pwm-qcom.example.dt.yaml: example-0: pwms@e800:reg:0: [59392] is too short
	From schema: /usr/local/lib/python3.8/dist-packages/dtschema/schemas/reg.yaml
Documentation/devicetree/bindings/pwm/pwm-qcom.example.dt.yaml:0:0: /example-0/pwms@e800: failed to match any schema with compatible: ['qcom,pwm']

See https://patchwork.ozlabs.org/patch/1470623

This check can fail if there are any dependencies. The base for a patch
series is generally the most recent rc1.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit.