Re: [PATCH 1/2] dt-bindings: pwm: add bindings for PWM modules inside QCOM PMICs

[fenglinw]

On 2021-04-27 20:57, Rob Herring wrote:
> On Tue, 27 Apr 2021 18:22:09 +0800, Fenglin Wu wrote:
> > Add bindings for QCOM PMIC PWM modules which are accessed through SPMI
> > bus.
> >
> > Signed-off-by: Fenglin Wu <fenglinw@xxxxxxxxxxxxxx>
> > ---
> >  .../devicetree/bindings/pwm/pwm-qcom.yaml          | 51 
> > ++++++++++++++++++++++
> >  1 file changed, 51 insertions(+)
> >  create mode 100644 
> > Documentation/devicetree/bindings/pwm/pwm-qcom.yaml
>
> My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
> on your patch (DT_CHECKER_FLAGS is new in v5.13):
>
> yamllint warnings/errors:
> ./Documentation/devicetree/bindings/pwm/pwm-qcom.yaml:29:6: [warning]
> wrong indentation: expected 4 but found 5 (indentation)
>
> dtschema/dtc warnings/errors:
> /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/pwm/pwm-qcom.yaml:
> Additional properties are not allowed ('Properties' was unexpected)
> /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/pwm/pwm-qcom.yaml:
> Additional properties are not allowed ('Properties' was unexpected)
> /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/pwm/pwm-qcom.yaml:
> 'anyOf' conditional failed, one must be fixed:
> 	'properties' is a required property
> 	'patternProperties' is a required property
> /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/pwm/pwm-qcom.yaml:
> ignoring, error in schema:
> warning: no schema found in file:
> ./Documentation/devicetree/bindings/pwm/pwm-qcom.yaml
> Documentation/devicetree/bindings/pwm/pwm-qcom.example.dts:21.13-28:
> Warning (reg_format): /example-0/pwms@e800:reg: property has invalid
> length (4 bytes) (#address-cells == 1, #size-cells == 1)
> Documentation/devicetree/bindings/pwm/pwm-qcom.example.dt.yaml:
> Warning (pci_device_reg): Failed prerequisite 'reg_format'
> Documentation/devicetree/bindings/pwm/pwm-qcom.example.dt.yaml:
> Warning (pci_device_bus_num): Failed prerequisite 'reg_format'
> Documentation/devicetree/bindings/pwm/pwm-qcom.example.dt.yaml:
> Warning (simple_bus_reg): Failed prerequisite 'reg_format'
> Documentation/devicetree/bindings/pwm/pwm-qcom.example.dt.yaml:
> Warning (i2c_bus_reg): Failed prerequisite 'reg_format'
> Documentation/devicetree/bindings/pwm/pwm-qcom.example.dt.yaml:
> Warning (spi_bus_reg): Failed prerequisite 'reg_format'
> /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/pwm/pwm-qcom.example.dt.yaml:
> example-0: pwms@e800:reg:0: [59392] is too short
> 	From schema: 
> /usr/local/lib/python3.8/dist-packages/dtschema/schemas/reg.yaml
> Documentation/devicetree/bindings/pwm/pwm-qcom.example.dt.yaml:0:0:
> /example-0/pwms@e800: failed to match any schema with compatible:
> ['qcom,pwm']
>
> See https://patchwork.ozlabs.org/patch/1470623
>
> This check can fail if there are any dependencies. The base for a patch
> series is generally the most recent rc1.
>
> If you already ran 'make dt_binding_check' and didn't see the above
> error(s), then make sure 'yamllint' is installed and dt-schema is up to
> date:
>
> pip3 install dtschema --upgrade
>
> Please check and re-submit.

Thanks for the information. It's my 1st time to write binding using yaml 
format, I hadn't noticed there was a checker can be used for sanity 
test. I will update and run the dt_binding_check at my side before 
uploading new patchset.