[PATCH 06/11] iio: adc: ad7192: Avoid disabling a clock that was never enabled.

[Alexandru Ardelean]

From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>

Found by inspection.

If the internal clock source is being used, the driver doesn't
call clk_prepare_enable() and as such we should not call
clk_disable_unprepare()

Use the same condition to protect the disable path as is used
on the enable one.  Note this will all get simplified when
the driver moves over to a full devm_ flow, but that would make
backporting the fix harder.

Fix obviously predates move out of staging, but backporting will
become more complex (and is unlikely to happen), hence that patch
is given in the fixes tag.

Fixes: b581f748cce0 ("staging: iio: adc: ad7192: move out of staging")
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
Cc: Alexandru Tachici <alexandru.tachici@xxxxxxxxxx>
Cc: Alexandru Ardelean <ardeleanalex@xxxxxxxxx>
Reviewed-by: Alexandru Ardelean <ardeleanalex@xxxxxxxxx>
---
 drivers/iio/adc/ad7192.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/drivers/iio/adc/ad7192.c b/drivers/iio/adc/ad7192.c
index 2671581d761f..5b3c46213bd4 100644
--- a/drivers/iio/adc/ad7192.c
+++ b/drivers/iio/adc/ad7192.c
@@ -1014,7 +1014,9 @@ static int ad7192_probe(struct spi_device *spi)
 	return 0;
 
 error_disable_clk:
-	clk_disable_unprepare(st->mclk);
+	if (st->clock_sel == AD7192_CLK_EXT_MCLK1_2 ||
+	    st->clock_sel == AD7192_CLK_EXT_MCLK2)
+		clk_disable_unprepare(st->mclk);
 error_remove_trigger:
 	ad_sd_cleanup_buffer_and_trigger(indio_dev);
 error_disable_dvdd:
@@ -1031,7 +1033,9 @@ static int ad7192_remove(struct spi_device *spi)
 	struct ad7192_state *st = iio_priv(indio_dev);
 
 	iio_device_unregister(indio_dev);
-	clk_disable_unprepare(st->mclk);
+	if (st->clock_sel == AD7192_CLK_EXT_MCLK1_2 ||
+	    st->clock_sel == AD7192_CLK_EXT_MCLK2)
+		clk_disable_unprepare(st->mclk);
 	ad_sd_cleanup_buffer_and_trigger(indio_dev);
 
 	regulator_disable(st->dvdd);
-- 
2.31.1