Re: [PATCH 0/3] iio: accel: kxcjk-1013: Add support for KX023-1025

[Hans de Goede]

Hi,

On 5/11/21 11:54 AM, Stephan Gerhold wrote:
> KX023-1025 [1] is another accelerometer from Kionix that has lots
> of additional functionality compared to KXCJK-1013. It combines the
> motion interrupt functionality from KXCJK with the tap detection
> from KXTF9, plus a lot more other functionality.
> 
> This patch set does not add support for any of the extra functionality,
> but makes basic functionality work with the existing kxcjk-1013 driver.
> 
> At first, the register map for the KX023-1025 seems quite different
> from the other accelerometers supported by the kxcjk-1013.
> However, it turns out that at least most of the register bits
> still mean the same for KX023-1025.
> 
> This patch set refactors the kxcjk-1013 driver a little bit
> to get the register addresses from a chip-specific struct.
> The register bits can be re-used for all the different chips.
> 
> The KX023-1025 is used in several smartphones from Huawei.
> I tested these changes on a Huawei Ascend G7, someone else reported
> they also work fine on the Huawei Honor 5X (codename "kiwi").
> 
> [1]: https://kionixfs.azureedge.net/en/datasheet/KX023-1025%20Specifications%20Rev%2012.0.pdf
> 
> Stephan Gerhold (3):
>   dt-bindings: iio: kionix,kxcjk1013: Document kionix,kx023-1025
>   iio: accel: kxcjk-1013: Refactor configuration registers into struct
>   iio: accel: kxcjk-1013: Add support for KX023-1025

Thanks, the entire series looks good to me:

Reviewed-by: Hans de Goede <hdegoede@xxxxxxxxxx>

for the series.

Regards,

Hans