Re: [PATCH 0/3] iio: accel: kxcjk-1013: Add support for KX023-1025

[Jonathan Cameron]

On Tue, 11 May 2021 12:44:23 +0200
Hans de Goede <hdegoede@xxxxxxxxxx> wrote:

> Hi,
> 
> On 5/11/21 11:54 AM, Stephan Gerhold wrote:
> > KX023-1025 [1] is another accelerometer from Kionix that has lots
> > of additional functionality compared to KXCJK-1013. It combines the
> > motion interrupt functionality from KXCJK with the tap detection
> > from KXTF9, plus a lot more other functionality.
> > 
> > This patch set does not add support for any of the extra functionality,
> > but makes basic functionality work with the existing kxcjk-1013 driver.
> > 
> > At first, the register map for the KX023-1025 seems quite different
> > from the other accelerometers supported by the kxcjk-1013.
> > However, it turns out that at least most of the register bits
> > still mean the same for KX023-1025.
> > 
> > This patch set refactors the kxcjk-1013 driver a little bit
> > to get the register addresses from a chip-specific struct.
> > The register bits can be re-used for all the different chips.
> > 
> > The KX023-1025 is used in several smartphones from Huawei.
> > I tested these changes on a Huawei Ascend G7, someone else reported
> > they also work fine on the Huawei Honor 5X (codename "kiwi").
> > 
> > [1]: https://kionixfs.azureedge.net/en/datasheet/KX023-1025%20Specifications%20Rev%2012.0.pdf
> > 
> > Stephan Gerhold (3):
> >   dt-bindings: iio: kionix,kxcjk1013: Document kionix,kx023-1025
> >   iio: accel: kxcjk-1013: Refactor configuration registers into struct
> >   iio: accel: kxcjk-1013: Add support for KX023-1025  
> 
> Thanks, the entire series looks good to me:
> 
> Reviewed-by: Hans de Goede <hdegoede@xxxxxxxxxx>
> 

Other than those things 0-day found which would be good to tidy up for a v2
looks good to me.

Thanks,

Jonathan

> for the series.
> 
> Regards,
> 
> Hans
>