Re: [PATCH RESEND] ARM: dts: imx6dl-yapp4: Configure the OLED display segment offset

[Michal Vokáč]

On 23. 05. 21 5:49, Shawn Guo wrote:
> On Wed, May 12, 2021 at 11:55:14AM +0200, Michal Vokáč wrote:
> > The imx6dl-yapp4 platform uses a GE-LX012864FWPP3N0000 OLED display.
> > The display consist of a 128x64 OLED panel and a SSD1305 controller.
> >
> > The OLED panel resolution is 128x64 but the built-in controller default
> > resolution is 132x64. To display properly a segment offset needs to be
> > configured.
> >
> > Signed-off-by: Michal Vokáč <michal.vokac@xxxxxxxxx>
>
> Why are you resending?  Please state reason when you resend.

I can't tell where but a while ago I read in some documentation
that if you do not get any response for aprox. two weeks you
can/should resend the patch in case it fell through the cracks.
I sent these patches in the middle of April, four weeks ago,
and have got no replies since then. So I [RESEND PATCH] these.

I totally understand that you, and all maintainers and reviewers
in general, are very busy so it may take a long time to reply.

AFAIK one does not need to state a reason for RESEND PATCH.
The word RESEND itself should explain the reason. This is not v2,
where I would of course describe what has changed.

Please correct me if my understanding of this part of the submitting
process is incorrect.

Thank you,
Michal