[PATCH v3 2/2] arm64: dts: qcom: sc7180: SD-card GPIO pin set bias-pull up

[Sujit Kautkar]

Some SC7180 based board do not have external pull-up for cd-gpio.
Set this pin to internal pull-up for sleep config to avoid frequent
regulator toggle events.

Signed-off-by: Sujit Kautkar <sujitka@xxxxxxxxxxxx>
---

Changes in v3:
- remove 'trogdor' from commit message
- move reference patch from commit message

Changes in v2:
- added pull-up for IDP

This change is with reference to Qualcomm's DT change posted at:
https://patchwork.kernel.org/patch/11675347/

 arch/arm64/boot/dts/qcom/sc7180-idp.dts      | 2 +-
 arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sc7180-idp.dts b/arch/arm64/boot/dts/qcom/sc7180-idp.dts
index 07133e0af581a..0c255edb7f3c3 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-idp.dts
+++ b/arch/arm64/boot/dts/qcom/sc7180-idp.dts
@@ -696,7 +696,7 @@ pinconf-data {
 
 		pinconf-sd-cd {
 			pins = "gpio69";
-			bias-disable;
+			bias-pull-up;
 			drive-strength = <2>;
 		};
 	};
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
index d128a0ed6ad3a..330deb4967ca2 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor.dtsi
@@ -1638,7 +1638,7 @@ pinconf-data {
 
 		pinconf-sd-cd {
 			pins = "gpio69";
-			bias-disable;
+			bias-pull-up;
 			drive-strength = <2>;
 		};
 	};
-- 
2.32.0.rc0.204.g9fa02ecfa5-goog