Re: [PATCH RFC 2/2] mmc: meson-gx: use sg_copy_to/from_io instead of local version

[Robin Murphy]

On 2021-06-28 13:34, Neil Armstrong wrote:
> Use the proper sg_copy_to_io & sg_copy_from_io instead of having a local
> sg_copy_buffer variant to handle the I/O mapped buffer case.
>
> Cc: Robin Murphy <robin.murphy@xxxxxxx>
> Signed-off-by: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
> ---
>   drivers/mmc/host/meson-gx-mmc.c | 53 +++++++--------------------------
>   1 file changed, 10 insertions(+), 43 deletions(-)
>
> diff --git a/drivers/mmc/host/meson-gx-mmc.c b/drivers/mmc/host/meson-gx-mmc.c
> index 3f28eb4d17fe..c13436efb414 100644
> --- a/drivers/mmc/host/meson-gx-mmc.c
> +++ b/drivers/mmc/host/meson-gx-mmc.c
> @@ -746,47 +746,6 @@ static void meson_mmc_desc_chain_transfer(struct mmc_host *mmc, u32 cmd_cfg)
>   	writel(start, host->regs + SD_EMMC_START);
>   }
>   
> -/* local sg copy to buffer version with _to/fromio usage for dram_access_quirk */
> -static void meson_mmc_copy_buffer(struct meson_host *host, struct mmc_data *data,
> -				  size_t buflen, bool to_buffer)
> -{
> -	unsigned int sg_flags = SG_MITER_ATOMIC;
> -	struct scatterlist *sgl = data->sg;
> -	unsigned int nents = data->sg_len;
> -	struct sg_mapping_iter miter;
> -	unsigned int offset = 0;
> -
> -	if (to_buffer)
> -		sg_flags |= SG_MITER_FROM_SG;
> -	else
> -		sg_flags |= SG_MITER_TO_SG;
> -
> -	sg_miter_start(&miter, sgl, nents, sg_flags);
> -
> -	while ((offset < buflen) && sg_miter_next(&miter)) {
> -		unsigned int len;
> -
> -		len = min(miter.length, buflen - offset);
> -
> -		/* When dram_access_quirk, the bounce buffer is a iomem mapping */
> -		if (host->dram_access_quirk) {
> -			if (to_buffer)
> -				memcpy_toio(host->bounce_iomem_buf + offset, miter.addr, len);
> -			else
> -				memcpy_fromio(miter.addr, host->bounce_iomem_buf + offset, len);
> -		} else {
> -			if (to_buffer)
> -				memcpy(host->bounce_buf + offset, miter.addr, len);
> -			else
> -				memcpy(miter.addr, host->bounce_buf + offset, len);
> -		}
> -
> -		offset += len;
> -	}
> -
> -	sg_miter_stop(&miter);
> -}
> -
>   static void meson_mmc_start_cmd(struct mmc_host *mmc, struct mmc_command *cmd)
>   {
>   	struct meson_host *host = mmc_priv(mmc);
> @@ -830,7 +789,12 @@ static void meson_mmc_start_cmd(struct mmc_host *mmc, struct mmc_command *cmd)
>   		if (data->flags & MMC_DATA_WRITE) {
>   			cmd_cfg |= CMD_CFG_DATA_WR;
>   			WARN_ON(xfer_bytes > host->bounce_buf_size);
> -			meson_mmc_copy_buffer(host, data, xfer_bytes, true);
> +			if (host->dram_access_quirk)
> +				sg_copy_to_io(data->sg, data->sg_len,
> +					      host->bounce_iomem_buf, xfer_bytes);

Maybe you could just use host->regs + SD_EMMC_SRAM_DATA_BUF_OFF directly 
here (and below) and save carrying host->bounce_iomem_buf around?

Robin.

> +			else
> +				sg_copy_to_buffer(data->sg, data->sg_len,
> +						  host->bounce_buf, xfer_bytes);
>   			dma_wmb();
>   		}
>   
> @@ -999,7 +963,10 @@ static irqreturn_t meson_mmc_irq_thread(int irq, void *dev_id)
>   	if (meson_mmc_bounce_buf_read(data)) {
>   		xfer_bytes = data->blksz * data->blocks;
>   		WARN_ON(xfer_bytes > host->bounce_buf_size);
> -		meson_mmc_copy_buffer(host, data, xfer_bytes, false);
> +		if (host->dram_access_quirk)
> +			sg_copy_from_io(data->sg, data->sg_len, host->bounce_iomem_buf, xfer_bytes);
> +		else
> +			sg_copy_from_buffer(data->sg, data->sg_len, host->bounce_buf, xfer_bytes);
>   	}
>   
>   	next_cmd = meson_mmc_get_next_command(cmd);