Re: [PATCH v1 1/3] dt-bindings: mfd: convert tps65086.txt to YAML

From: Emil Renner Berthing
Date: Wed Jul 14 2021 - 17:00:13 EST


On Wed, 14 Jul 2021 at 22:44, Rob Herring <robh@xxxxxxxxxx> wrote:
> On Sat, Jun 26, 2021 at 12:47:42AM +0200, Emil Renner Berthing wrote:
> > This converts the tps65086.txt binding description to YAML schema so
> > dts files can be verified automatically.
> >
> > Signed-off-by: Emil Renner Berthing <kernel@xxxxxxxx>
> > ---
> > @Andrew: The dt-bindings meta schema requires a maintainer entry. I hope
> > it's ok that I've added you, otherwise I don't know who should be
> > listed.
>
> Anyone that knows the h/w and/or cares if the binding is changed or
> deleted. If you can't find anyone, then good, one less binding. :)

Hmm.. unless someone else responds I guess I'll just put myself then
since I at least care that it isn't deleted.

> >
> > .../devicetree/bindings/mfd/ti,tps65086.yaml | 127 ++++++++++++++++++
> > .../devicetree/bindings/mfd/tps65086.txt | 54 --------
> > 2 files changed, 127 insertions(+), 54 deletions(-)
> > create mode 100644 Documentation/devicetree/bindings/mfd/ti,tps65086.yaml
> > delete mode 100644 Documentation/devicetree/bindings/mfd/tps65086.txt
> >
> > diff --git a/Documentation/devicetree/bindings/mfd/ti,tps65086.yaml b/Documentation/devicetree/bindings/mfd/ti,tps65086.yaml
> > new file mode 100644
> > index 000000000000..ba638bd10a58
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/mfd/ti,tps65086.yaml
> > @@ -0,0 +1,127 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/mfd/ti,tps65086.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: TPS65086 Power Management Integrated Circuit (PMIC)
> > +
> > +maintainers:
> > + - Andrew F. Davis <afd@xxxxxx>
>
> Not a valid email any more.
>
> > +
> > +properties:
> > + compatible:
> > + const: ti,tps65086
> > +
> > + reg:
> > + const: 0x5e
> > + description: I2C slave address
> > +
> > + interrupts:
> > + maxItems: 1
> > +
> > + interrupt-controller: true
> > +
> > + '#interrupt-cells':
> > + const: 2
> > + description: |
> > + The first cell is the IRQ number. The second cell is the flags,
> > + encoded as trigger masks from ../interrupt-controller/interrupts.txt.
> > +
> > + gpio-controller: true
> > +
> > + '#gpio-cells':
> > + const: 2
> > + description: |
> > + The first cell is the pin number and the second cell is used to specify
> > + flags. See ../gpio/gpio.txt for more information.
> > +
> > + regulators:
> > + type: object
> > + description: |
> > + List of child nodes that specify the regulator initialization data.
> > + Child nodes must be named after their hardware counterparts:
> > + buck[1-6], ldoa[1-3], swa1, swb[1-2], and vtt.
> > + Each child node is defined using the standard binding for regulators and
> > + the optional regulator properties defined below.
> > +
> > + patternProperties:
> > + "^buck[1-6]$":
> > + type: object
> > + $ref: ../regulator/regulator.yaml
> > +
> > + properties:
> > + regulator-name: true
> > + regulator-boot-on: true
> > + regulator-always-on: true
> > + regulator-min-microvolt: true
> > + regulator-max-microvolt: true
> > + ti,regulator-step-size-25mv:
> > + type: boolean
> > + description: |
> > + Set this if the regulator is factory set with a 25mv step voltage
> > + mapping.
> > + ti,regulator-decay:
> > + type: boolean
> > + description: |
> > + Set this if the output needs to decay, default is for the output
> > + to slew down.
> > +
> > + additionalProperties: false
> > +
> > + "^(ldoa[1-3]|swa1|swb[1-2]|vtt)$":
> > + type: object
> > + $ref: ../regulator/regulator.yaml
> > +
> > + properties:
> > + regulator-name: true
> > + regulator-boot-on: true
> > + regulator-always-on: true
> > + regulator-min-microvolt: true
> > + regulator-max-microvolt: true
> > +
> > + additionalProperties: false
> > +
> > +additionalProperties: false
> > +
> > +required:
> > + - compatible
> > + - reg
> > + - interrupts
> > + - interrupt-controller
> > + - '#interrupt-cells'
> > + - gpio-controller
> > + - '#gpio-cells'
> > + - regulators
> > +
> > +examples:
> > + - |
> > + #include <dt-bindings/interrupt-controller/irq.h>
> > + i2c0 {
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > +
> > + pmic: tps65086@5e {
>
> pmic@5e

Will fix, thanks!

> > + compatible = "ti,tps65086";
> > + reg = <0x5e>;
> > + interrupt-parent = <&gpio1>;
> > + interrupts = <28 IRQ_TYPE_LEVEL_LOW>;
> > + interrupt-controller;
> > + #interrupt-cells = <2>;
> > + gpio-controller;
> > + #gpio-cells = <2>;
> > +
> > + regulators {
> > + buck1 {
> > + regulator-name = "vcc1";
> > + regulator-min-microvolt = <1600000>;
> > + regulator-max-microvolt = <1600000>;
> > + regulator-boot-on;
> > + ti,regulator-decay;
> > + ti,regulator-step-size-25mv;
> > + };
> > + };
> > + };
> > + };
> > +
> > +...
> > diff --git a/Documentation/devicetree/bindings/mfd/tps65086.txt b/Documentation/devicetree/bindings/mfd/tps65086.txt
> > deleted file mode 100644
> > index 67eac0ed32df..000000000000
> > --- a/Documentation/devicetree/bindings/mfd/tps65086.txt
> > +++ /dev/null
> > @@ -1,54 +0,0 @@
> > -* TPS65086 Power Management Integrated Circuit (PMIC) bindings
> > -
> > -Required properties:
> > - - compatible : Should be "ti,tps65086".
> > - - reg : I2C slave address.
> > - - interrupts : The interrupt line the device is connected to.
> > - - interrupt-controller : Marks the device node as an interrupt controller.
> > - - #interrupt-cells : The number of cells to describe an IRQ, should be 2.
> > - The first cell is the IRQ number.
> > - The second cell is the flags, encoded as trigger
> > - masks from ../interrupt-controller/interrupts.txt.
> > - - gpio-controller : Marks the device node as a GPIO Controller.
> > - - #gpio-cells : Should be two. The first cell is the pin number and
> > - the second cell is used to specify flags.
> > - See ../gpio/gpio.txt for more information.
> > - - regulators: : List of child nodes that specify the regulator
> > - initialization data. Child nodes must be named
> > - after their hardware counterparts: buck[1-6],
> > - ldoa[1-3], swa1, swb[1-2], and vtt. Each child
> > - node is defined using the standard binding for
> > - regulators and the optional regulator properties
> > - defined below.
> > -
> > -Optional regulator properties:
> > - - ti,regulator-step-size-25mv : This is applicable for buck[1-6], set this
> > - if the regulator is factory set with a 25mv
> > - step voltage mapping.
> > - - ti,regulator-decay : This is applicable for buck[1-6], set this if
> > - the output needs to decay, default is for
> > - the output to slew down.
> > -
> > -Example:
> > -
> > - pmic: tps65086@5e {
> > - compatible = "ti,tps65086";
> > - reg = <0x5e>;
> > - interrupt-parent = <&gpio1>;
> > - interrupts = <28 IRQ_TYPE_LEVEL_LOW>;
> > - interrupt-controller;
> > - #interrupt-cells = <2>;
> > - gpio-controller;
> > - #gpio-cells = <2>;
> > -
> > - regulators {
> > - buck1 {
> > - regulator-name = "vcc1";
> > - regulator-min-microvolt = <1600000>;
> > - regulator-max-microvolt = <1600000>;
> > - regulator-boot-on;
> > - ti,regulator-decay;
> > - ti,regulator-step-size-25mv;
> > - };
> > - };
> > - };
> > --
> > 2.32.0
> >
> >