[PATCH] [v2,1/1] Fix WWAN device disabled issue after S3 deep

[Slark Xiao]

When WWAN device wake from S3 deep, under thinkpad platform,
WWAN would be disabled. This disable status could be checked
 by command 'nmcli r wwan' or 'rfkill list'.
Issue analysis as below:
  When host resume from S3 deep, thinkpad_acpi driver would
call hotkey_resume() function. Finnaly, it will use
wan_get_status to check the current status of WWAN device.
During this resume progress, wan_get_status would always
return off even WWAN boot up completely.
  If wan_get_status() return off, rfkill_set_sw_state() would set WWAN's
status as disabled.
  This may be a fault of LENOVO BIOS.
  Workaround is add a WWAN device check before rfkill_set_sw_state().
If it's a Foxconn WWAN device, then we will ignore to do a status update.

Signed-off-by: Slark Xiao <slark_xiao@xxxxxxx>
---
 drivers/platform/x86/thinkpad_acpi.c | 16 ++++++++++++++--
 1 file changed, 14 insertions(+), 2 deletions(-)

diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c
index 603156a6e3ed..e3b7bc0e7a33 100644
--- a/drivers/platform/x86/thinkpad_acpi.c
+++ b/drivers/platform/x86/thinkpad_acpi.c
@@ -1159,6 +1159,13 @@ struct tpacpi_rfk_ops {
 
 static struct tpacpi_rfk *tpacpi_rfkill_switches[TPACPI_RFK_SW_MAX];
 
+/*Foxconn SDX55 T77W175 products. All available device ID*/
+static const struct pci_device_id foxconn_device_ids[] = {
+	{ PCI_DEVICE(PCI_VENDOR_ID_FOXCONN, 0xE0AB) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_FOXCONN, 0xE0AF) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_FOXCONN, 0xE0B4) },
+	{}
+};
 /* Query FW and update rfkill sw state for a given rfkill switch */
 static int tpacpi_rfk_update_swstate(const struct tpacpi_rfk *tp_rfk)
 {
@@ -1182,8 +1189,13 @@ static void tpacpi_rfk_update_swstate_all(void)
 {
 	unsigned int i;
 
-	for (i = 0; i < TPACPI_RFK_SW_MAX; i++)
-		tpacpi_rfk_update_swstate(tpacpi_rfkill_switches[i]);
+	for (i = 0; i < TPACPI_RFK_SW_MAX; i++) {
+		if (pci_dev_present(foxconn_device_ids) && i == 1)
+			pr_info("Find Foxconn wwan device, ignore to update rfkill switch status\n");
+		else
+			tpacpi_rfk_update_swstate(tpacpi_rfkill_switches[i]);
+
+	}
 }
 
 /*
-- 
2.25.1