Re: [PATCH] [v2,1/1] Fix WWAN device disabled issue after S3 deep

From: Hans de Goede
Date: Thu Aug 12 2021 - 04:05:47 EST


Hi,

On 8/11/21 11:34 AM, Slark Xiao wrote:
> When WWAN device wake from S3 deep, under thinkpad platform,
> WWAN would be disabled. This disable status could be checked
> by command 'nmcli r wwan' or 'rfkill list'.
> Issue analysis as below:
> When host resume from S3 deep, thinkpad_acpi driver would
> call hotkey_resume() function. Finnaly, it will use
> wan_get_status to check the current status of WWAN device.
> During this resume progress, wan_get_status would always
> return off even WWAN boot up completely.
> If wan_get_status() return off, rfkill_set_sw_state() would set WWAN's
> status as disabled.
> This may be a fault of LENOVO BIOS.
> Workaround is add a WWAN device check before rfkill_set_sw_state().
> If it's a Foxconn WWAN device, then we will ignore to do a status update.
>
> Signed-off-by: Slark Xiao <slark_xiao@xxxxxxx>

Thank you for debugging this and thank you for the patch.

I'm not in favor of using a pci-device-id list here. Maybe we should
simply just never update the sw-rfkill state after a suspend-resume ?

I mean the sw_state should be unchanged after a suspend/resume.

Only the hw_state on older devices which still have a physical
radio on/off slider on the side might have changed during suspend.

So I think it might be better to just drop the tpacpi_rfk_update_swstate
call all together from the resume path?

Mark do you have any input here?

Regards,

Hans



> ---
> drivers/platform/x86/thinkpad_acpi.c | 16 ++++++++++++++--
> 1 file changed, 14 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c
> index 603156a6e3ed..e3b7bc0e7a33 100644
> --- a/drivers/platform/x86/thinkpad_acpi.c
> +++ b/drivers/platform/x86/thinkpad_acpi.c
> @@ -1159,6 +1159,13 @@ struct tpacpi_rfk_ops {
>
> static struct tpacpi_rfk *tpacpi_rfkill_switches[TPACPI_RFK_SW_MAX];
>
> +/*Foxconn SDX55 T77W175 products. All available device ID*/
> +static const struct pci_device_id foxconn_device_ids[] = {
> + { PCI_DEVICE(PCI_VENDOR_ID_FOXCONN, 0xE0AB) },
> + { PCI_DEVICE(PCI_VENDOR_ID_FOXCONN, 0xE0AF) },
> + { PCI_DEVICE(PCI_VENDOR_ID_FOXCONN, 0xE0B4) },
> + {}
> +};
> /* Query FW and update rfkill sw state for a given rfkill switch */
> static int tpacpi_rfk_update_swstate(const struct tpacpi_rfk *tp_rfk)
> {
> @@ -1182,8 +1189,13 @@ static void tpacpi_rfk_update_swstate_all(void)
> {
> unsigned int i;
>
> - for (i = 0; i < TPACPI_RFK_SW_MAX; i++)
> - tpacpi_rfk_update_swstate(tpacpi_rfkill_switches[i]);
> + for (i = 0; i < TPACPI_RFK_SW_MAX; i++) {
> + if (pci_dev_present(foxconn_device_ids) && i == 1)
> + pr_info("Find Foxconn wwan device, ignore to update rfkill switch status\n");
> + else
> + tpacpi_rfk_update_swstate(tpacpi_rfkill_switches[i]);
> +
> + }
> }
>
> /*
>