Re: [PATCH 0/3] Fix for KSZ DSA switch shutdown

[Lino Sanfilippo]

On 09.09.21 at 17:11, Andrew Lunn wrote:
>> Andrew: the switch is not on a hat, the device tree part I use is:
>
> And this is not an overlay. It is all there at boot?
>

Well actually we DO use an overlay. The dev tree snipped I posted was an excerpt form
fdtdump. The concerning fragment looks like this in the overlay file:


        fragment@4 {
                target = <&spi6>;
                __overlay__ {
                        #address-cells = <1>;
                        #size-cells = <0>;
                        pinctrl-names = "default";
                        pinctrl-0 = <&spi6_pins>, <&spi6_cs_pins>;
                        cs-gpios = <&gpio 16 GPIO_ACTIVE_LOW>,
                                   <&gpio 18 GPIO_ACTIVE_LOW>;
                        status = "okay";

                        ksz9897: ksz9897@0 {
                                compatible = "microchip,ksz9897";
                                reg = <0>;
                                spi-max-frequency = <50000000>;
                                spi-cpha;
                                spi-cpol;
                                reset-gpios = <&expander_core 13 GPIO_ACTIVE_LOW>;
                                status = "okay";

                                ports {
                                        #address-cells = <1>;
                                        #size-cells = <0>;
                                        /* PORT 1 */
                                        port@0 {
                                                reg = <0>;
                                                label = "cpu";
                                                ethernet = <&genet>;
                                        };
                                        /* PORT 2 */
                                        port@1 {
                                                reg = <1>;
                                                label = "pileft";
                                        };
                                        /* PORT 3 */
                                        port@2 {
                                                reg = <2>;
                                                label = "piright";
                                        };
                                        /*
                                         * PORT 4-7 unused
                                         */
                                };
                        };

                        tpm: tpm@1 {
                                compatible = "infineon,slb9670";
                                pinctrl-names = "default";
                                pinctrl-0 = <&tpm_pins>;
                                reg = <1>;
                                spi-max-frequency = <1000000>;
                                interrupt-parent = <&gpio>;
                                #interrupt-cells = <2>;
                                interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
                                status = "okay";
                        };
                };
        };


But probably this does not matter any more now
that Vladimir was able to reproduce the issue.

> I was just thinking that maybe the Ethernet interface gets opened at
> boot, and overlay is loaded, and the interface is opened a second
> time. I don't know of anybody using DSA with overlays, so that could
> of been the key difference which breaks it for you.
>
> Your decompiled DT blob looks O.K.
>
>     Andrew
>