[PATCH AUTOSEL 5.10 31/53] MIPS: mscc: ocelot: mark the phy-mode for internal PHY ports

[Sasha Levin]

From: Vladimir Oltean <vladimir.oltean@xxxxxxx>

[ Upstream commit eba54cbb92d28b4f6dc1ed5f73f5187b09d82c08 ]

The ocelot driver was converted to phylink, and that expects a valid
phy_interface_t. Without a phy-mode, of_get_phy_mode returns
PHY_INTERFACE_MODE_NA, which is not ideal because phylink rejects that.

The ocelot driver was patched to treat PHY_INTERFACE_MODE_NA as
PHY_INTERFACE_MODE_INTERNAL to work with the broken DT blobs, but we
should fix the device trees and specify the phy-mode too.

Signed-off-by: Vladimir Oltean <vladimir.oltean@xxxxxxx>
Signed-off-by: Thomas Bogendoerfer <tsbogend@xxxxxxxxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
 arch/mips/boot/dts/mscc/ocelot_pcb120.dts | 4 ++++
 arch/mips/boot/dts/mscc/ocelot_pcb123.dts | 4 ++++
 2 files changed, 8 insertions(+)

diff --git a/arch/mips/boot/dts/mscc/ocelot_pcb120.dts b/arch/mips/boot/dts/mscc/ocelot_pcb120.dts
index d2dc6b3d923c..bd240690cb37 100644
--- a/arch/mips/boot/dts/mscc/ocelot_pcb120.dts
+++ b/arch/mips/boot/dts/mscc/ocelot_pcb120.dts
@@ -71,21 +71,25 @@ phy4: ethernet-phy@3 {
 &port0 {
 	status = "okay";
 	phy-handle = <&phy0>;
+	phy-mode = "internal";
 };
 
 &port1 {
 	status = "okay";
 	phy-handle = <&phy1>;
+	phy-mode = "internal";
 };
 
 &port2 {
 	status = "okay";
 	phy-handle = <&phy2>;
+	phy-mode = "internal";
 };
 
 &port3 {
 	status = "okay";
 	phy-handle = <&phy3>;
+	phy-mode = "internal";
 };
 
 &port4 {
diff --git a/arch/mips/boot/dts/mscc/ocelot_pcb123.dts b/arch/mips/boot/dts/mscc/ocelot_pcb123.dts
index 7d7e638791dd..0185045c7630 100644
--- a/arch/mips/boot/dts/mscc/ocelot_pcb123.dts
+++ b/arch/mips/boot/dts/mscc/ocelot_pcb123.dts
@@ -49,19 +49,23 @@ &mdio0 {
 &port0 {
 	status = "okay";
 	phy-handle = <&phy0>;
+	phy-mode = "internal";
 };
 
 &port1 {
 	status = "okay";
 	phy-handle = <&phy1>;
+	phy-mode = "internal";
 };
 
 &port2 {
 	status = "okay";
 	phy-handle = <&phy2>;
+	phy-mode = "internal";
 };
 
 &port3 {
 	status = "okay";
 	phy-handle = <&phy3>;
+	phy-mode = "internal";
 };
-- 
2.30.2