Re: [RFC PATCH v1 25/37] perf evsel: move event open in evsel__open_cpu to separate function
From: Arnaldo Carvalho de Melo
Date: Sat Sep 11 2021 - 15:10:27 EST
Em Fri, Sep 03, 2021 at 11:52:18PM +0200, Riccardo Mancini escreveu:
> Hi Arnaldo,
>
> thanks for your review and your suggestions, and also for the PRIu64 patch.
>
> On Tue, 2021-08-31 at 16:54 -0300, Arnaldo Carvalho de Melo wrote:
> > Em Sat, Aug 21, 2021 at 11:19:31AM +0200, Riccardo Mancini escreveu:
> > > This is the final patch splitting evsel__open_cpu.
> > > This patch moves the entire loop code to a separate function, to be
> > > reused for the multithreaded code.
> >
> > Are you going to use that 'enum perf_event_open_err' somewhere else?
> > I.e. is there a need to expose it in evsel.h?
>
> Yes, in the next patch (26/37). It's being used to expose a function that just
> does the perf_event_open calls for an evsel. It needs to return such structure
> to provide information about the error (which return code, at which thread).
>
> >
> > I'm stopping at this patch to give the ones I merged so far some
> > testing, will now push it to tmp.perf/core.
>
> I checked tmp.perf/core and it looks good to me.
> I also did some additional tests to check that fallback mechanisms where
> working:
>
> check missing pid being ignored (rerun until warning is shown)
> $ sudo ./perf bench internals evlist-open-close -i10 -u $UID
>
> check that weak group fallback is working
> $ sudo ./perf record -e '{cycles,cache-misses,cache-
> references,cpu_clk_unhalted.thread,cycles,cycles,cycles}:W'
>
> check that precision_ip fallback is working:
> edited perf-sys.h to make sys_perf_event_open fail if precision_ip > 2
> $ sudo ./perf record -e '{cycles,cs}:P'
>
>
> I've also run perf-test on my machine and it's passing too.
> I'm encounteirng one fail on the "BPF filter" test (42), which is present also
> in perf/core, so it should not be related to this patch.
Thanks! I'll try to resume work on it as soon as I have the plumbers
talk ready :-)
- Arnaldo
> Thanks,
> Riccardo
>
> >
> > - Arnaldo
> >
> > > Signed-off-by: Riccardo Mancini <rickyman7@xxxxxxxxx>
> > > ---
> > > tools/perf/util/evsel.c | 142 ++++++++++++++++++++++++----------------
> > > tools/perf/util/evsel.h | 12 ++++
> > > 2 files changed, 99 insertions(+), 55 deletions(-)
> > >
> > > diff --git a/tools/perf/util/evsel.c b/tools/perf/util/evsel.c
> > > index 2e95416b8320c6b9..e41f55a7a70ea630 100644
> > > --- a/tools/perf/util/evsel.c
> > > +++ b/tools/perf/util/evsel.c
> > > @@ -1945,6 +1945,82 @@ bool evsel__increase_rlimit(enum rlimit_action
> > > *set_rlimit)
> > > return false;
> > > }
> > >
> > > +static struct perf_event_open_result perf_event_open(struct evsel *evsel,
> > > + pid_t pid, int cpu, int thread,
> > > + struct perf_cpu_map *cpus,
> > > + struct perf_thread_map *threads)
> > > +{
> > > + int fd, group_fd, rc;
> > > + struct perf_event_open_result res;
> > > +
> > > + if (!evsel->cgrp && !evsel->core.system_wide)
> > > + pid = perf_thread_map__pid(threads, thread);
> > > +
> > > + group_fd = get_group_fd(evsel, cpu, thread);
> > > +
> > > + test_attr__ready();
> > > +
> > > + pr_debug2_peo("sys_perf_event_open: pid %d cpu %d group_fd %d flags
> > > %#lx",
> > > + pid, cpus->map[cpu], group_fd, evsel->open_flags);
> > > +
> > > + fd = sys_perf_event_open(&evsel->core.attr, pid, cpus->map[cpu],
> > > + group_fd, evsel->open_flags);
> > > +
> > > + FD(evsel, cpu, thread) = fd;
> > > + res.fd = fd;
> > > +
> > > + if (fd < 0) {
> > > + rc = -errno;
> > > +
> > > + pr_debug2_peo("\nsys_perf_event_open failed, error %d\n",
> > > + rc);
> > > + res.rc = rc;
> > > + res.err = PEO_FALLBACK;
> > > + return res;
> > > + }
> > > +
> > > + bpf_counter__install_pe(evsel, cpu, fd);
> > > +
> > > + if (unlikely(test_attr__enabled)) {
> > > + test_attr__open(&evsel->core.attr, pid,
> > > + cpus->map[cpu], fd,
> > > + group_fd, evsel->open_flags);
> > > + }
> > > +
> > > + pr_debug2_peo(" = %d\n", fd);
> > > +
> > > + if (evsel->bpf_fd >= 0) {
> > > + int evt_fd = fd;
> > > + int bpf_fd = evsel->bpf_fd;
> > > +
> > > + rc = ioctl(evt_fd,
> > > + PERF_EVENT_IOC_SET_BPF,
> > > + bpf_fd);
> > > + if (rc && errno != EEXIST) {
> > > + pr_err("failed to attach bpf fd %d: %s\n",
> > > + bpf_fd, strerror(errno));
> > > + res.rc = -EINVAL;
> > > + res.err = PEO_ERROR;
> > > + return res;
> > > + }
> > > + }
> > > +
> > > + /*
> > > + * If we succeeded but had to kill clockid, fail and
> > > + * have evsel__open_strerror() print us a nice error.
> > > + */
> > > + if (perf_missing_features.clockid ||
> > > + perf_missing_features.clockid_wrong) {
> > > + res.rc = -EINVAL;
> > > + res.err = PEO_ERROR;
> > > + return res;
> > > + }
> > > +
> > > + res.rc = 0;
> > > + res.err = PEO_SUCCESS;
> > > + return res;
> > > +}
> > > +
> > > static int evsel__open_cpu(struct evsel *evsel, struct perf_cpu_map *cpus,
> > > struct perf_thread_map *threads,
> > > int start_cpu, int end_cpu)
> > > @@ -1952,6 +2028,7 @@ static int evsel__open_cpu(struct evsel *evsel, struct
> > > perf_cpu_map *cpus,
> > > int cpu, thread, nthreads;
> > > int pid = -1, err, old_errno;
> > > enum rlimit_action set_rlimit = NO_CHANGE;
> > > + struct perf_event_open_result peo_res;
> > >
> > > err = __evsel__prepare_open(evsel, cpus, threads);
> > > if (err)
> > > @@ -1979,67 +2056,22 @@ static int evsel__open_cpu(struct evsel *evsel, struct
> > > perf_cpu_map *cpus,
> > > for (cpu = start_cpu; cpu < end_cpu; cpu++) {
> > >
> > > for (thread = 0; thread < nthreads; thread++) {
> > > - int fd, group_fd;
> > > retry_open:
> > > if (thread >= nthreads)
> > > break;
> > >
> > > - if (!evsel->cgrp && !evsel->core.system_wide)
> > > - pid = perf_thread_map__pid(threads, thread);
> > > -
> > > - group_fd = get_group_fd(evsel, cpu, thread);
> > > -
> > > - test_attr__ready();
> > > -
> > > - pr_debug2_peo("sys_perf_event_open: pid %d cpu %d
> > > group_fd %d flags %#lx",
> > > - pid, cpus->map[cpu], group_fd, evsel-
> > > >open_flags);
> > > + peo_res = perf_event_open(evsel, pid, cpu, thread,
> > > cpus,
> > > + threads);
> > >
> > > - fd = sys_perf_event_open(&evsel->core.attr, pid, cpus-
> > > >map[cpu],
> > > - group_fd, evsel->open_flags);
> > > -
> > > - FD(evsel, cpu, thread) = fd;
> > > -
> > > - if (fd < 0) {
> > > - err = -errno;
> > > -
> > > - pr_debug2_peo("\nsys_perf_event_open failed,
> > > error %d\n",
> > > - err);
> > > + err = peo_res.rc;
> > > + switch (peo_res.err) {
> > > + case PEO_SUCCESS:
> > > + set_rlimit = NO_CHANGE;
> > > + continue;
> > > + case PEO_FALLBACK:
> > > goto try_fallback;
> > > - }
> > > -
> > > - bpf_counter__install_pe(evsel, cpu, fd);
> > > -
> > > - if (unlikely(test_attr__enabled)) {
> > > - test_attr__open(&evsel->core.attr, pid, cpus-
> > > >map[cpu],
> > > - fd, group_fd, evsel-
> > > >open_flags);
> > > - }
> > > -
> > > - pr_debug2_peo(" = %d\n", fd);
> > > -
> > > - if (evsel->bpf_fd >= 0) {
> > > - int evt_fd = fd;
> > > - int bpf_fd = evsel->bpf_fd;
> > > -
> > > - err = ioctl(evt_fd,
> > > - PERF_EVENT_IOC_SET_BPF,
> > > - bpf_fd);
> > > - if (err && errno != EEXIST) {
> > > - pr_err("failed to attach bpf fd %d:
> > > %s\n",
> > > - bpf_fd, strerror(errno));
> > > - err = -EINVAL;
> > > - goto out_close;
> > > - }
> > > - }
> > > -
> > > - set_rlimit = NO_CHANGE;
> > > -
> > > - /*
> > > - * If we succeeded but had to kill clockid, fail and
> > > - * have evsel__open_strerror() print us a nice error.
> > > - */
> > > - if (perf_missing_features.clockid ||
> > > - perf_missing_features.clockid_wrong) {
> > > - err = -EINVAL;
> > > + default:
> > > + case PEO_ERROR:
> > > goto out_close;
> > > }
> > > }
> > > diff --git a/tools/perf/util/evsel.h b/tools/perf/util/evsel.h
> > > index 0a245afab2d87d74..8c9827a93ac001a7 100644
> > > --- a/tools/perf/util/evsel.h
> > > +++ b/tools/perf/util/evsel.h
> > > @@ -282,6 +282,18 @@ int evsel__enable(struct evsel *evsel);
> > > int evsel__disable(struct evsel *evsel);
> > > int evsel__disable_cpu(struct evsel *evsel, int cpu);
> > >
> > > +enum perf_event_open_err {
> > > + PEO_SUCCESS,
> > > + PEO_FALLBACK,
> > > + PEO_ERROR
> > > +};
> > > +
> > > +struct perf_event_open_result {
> > > + enum perf_event_open_err err;
> > > + int rc;
> > > + int fd;
> > > +};
> > > +
> > > int evsel__open_per_cpu(struct evsel *evsel, struct perf_cpu_map *cpus, int
> > > cpu);
> > > int evsel__open_per_thread(struct evsel *evsel, struct perf_thread_map
> > > *threads);
> > > int evsel__open(struct evsel *evsel, struct perf_cpu_map *cpus,
> > > --
> > > 2.31.1
> >
>
--
- Arnaldo