[PATCH 2/2] Documentation/process: Add tip tree handbook
From: Borislav Petkov
Date: Mon Sep 13 2021 - 11:50:31 EST
From: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
Add a document to the subsystem/maintainer handbook section, which explains
what the tip tree is, how it operates and what rules and expectations it
has.
[ bp:
- Add a SPDX identifier, work in most comments from the thread.
- 9bf19b78a203 ("Documentation/submitting-patches: Document the SoB
chain") is also in the main Documentation but I'm leaving the
paragraph here because it has the proper structure - text talks about
SoBs and referencing somewhere else would interrupt the flow.
- Move backtraces in changelogs to main submitting-patches.rst.
- "Patch version information" is explained to a great detail in
submitting-patches.rst too.
- Hyperlink resend reminders section.
]
Signed-off-by: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
Signed-off-by: Borislav Petkov <bp@xxxxxxx>
Reviewed-by: Paul E. McKenney <paulmck@xxxxxxxxxxxxx>
Link: https://lkml.kernel.org/r/20181107171149.165693799@xxxxxxxxxxxxx
---
.../process/maintainer-handbooks.rst | 2 +
Documentation/process/maintainer-tip.rst | 785 ++++++++++++++++++
Documentation/process/submitting-patches.rst | 3 +
3 files changed, 790 insertions(+)
create mode 100644 Documentation/process/maintainer-tip.rst
diff --git a/Documentation/process/maintainer-handbooks.rst b/Documentation/process/maintainer-handbooks.rst
index cd707727dc8f..6af1abb0da48 100644
--- a/Documentation/process/maintainer-handbooks.rst
+++ b/Documentation/process/maintainer-handbooks.rst
@@ -14,3 +14,5 @@ Contents:
.. toctree::
:numbered:
:maxdepth: 2
+
+ maintainer-tip
diff --git a/Documentation/process/maintainer-tip.rst b/Documentation/process/maintainer-tip.rst
new file mode 100644
index 000000000000..2b495c8bcb5b
--- /dev/null
+++ b/Documentation/process/maintainer-tip.rst
@@ -0,0 +1,785 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+The tip tree handbook
+=====================
+
+What is the tip tree?
+---------------------
+
+The tip tree is a collection of several subsystems and areas of
+development. The tip tree is both a direct development tree and a
+aggregation tree for several sub-maintainer trees. The tip tree gitweb URL
+is: https://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git
+
+The tip tree contains the following subsystems:
+
+ - **x86 architecture**
+
+ The x86 architecture development takes place in the tip tree except
+ for the x86 KVM and XEN specific parts which are maintained in the
+ corresponding subsystems and routed directly to mainline from
+ there. It's still good practice to Cc the x86 maintainers on
+ x86-specific KVM and XEN patches.
+
+ Some x86 subsystems have their own maintainers in addition to the
+ overall x86 maintainers. Please Cc the overall x86 maintainers on
+ patches touching files in arch/x86 even when they are not called out
+ by the MAINTAINER file.
+
+ Note, that ``x86@xxxxxxxxxx`` is not a mailing list. It is merely a
+ mail alias which distributes mails to the x86 top-level maintainer
+ team. Please always Cc the Linux Kernel mailing list (LKML)
+ ``linux-kernel@xxxxxxxxxxxxxxx``, otherwise your mail ends up only in
+ the private inboxes of the maintainers.
+
+ - **Scheduler**
+
+ Scheduler development takes place in the -tip tree, in the
+ sched/core branch - with occasional sub-topic trees for
+ work-in-progress patch-sets.
+
+ - **Locking and atomics**
+
+ Locking development (including atomics and other synchronization
+ primitives that are connected to locking) takes place in the -tip
+ tree, in the locking/core branch - with occasional sub-topic trees
+ for work-in-progress patch-sets.
+
+ - **Generic interrupt subsystem and interrupt chip drivers**:
+
+ - interrupt core development happens in the irq/core branch
+
+ - interrupt chip driver development also happens in the irq/core
+ branch, but the patches are usually applied in a separate maintainer
+ tree and then aggregated into irq/core
+
+ - **Time, timers, timekeeping, NOHZ and related chip drivers**:
+
+ - timekeeping, clocksource core, NTP and alarmtimer development
+ happens in the timers/core branch, but patches are usually applied in
+ a separate maintainer tree and then aggregated into timers/core
+
+ - clocksource/event driver development happens in the timers/core
+ branch, but patches are mostly applied in a separate maintainer tree
+ and then aggregated into timers/core
+
+ - **Performance counters core, architecture support and tooling**:
+
+ - perf core and architecture support development happens in the
+ perf/core branch
+
+ - perf tooling development happens in the perf tools maintainer
+ tree and is aggregated into the tip tree.
+
+ - **CPU hotplug core**
+
+ - **RAS core**
+
+ Mostly x86-specific RAS patches are collected in the tip ras/core
+ branch.
+
+ - **EFI core**
+
+ EFI development in the efi git tree. The collected patches are
+ aggregated in the tip efi/core branch.
+
+ - **RCU**
+
+ RCU development happens in the linux-rcu tree. The resulting changes
+ are aggregated into the tip core/rcu branch.
+
+ - **Various core code components**:
+
+ - debugobjects
+
+ - objtool
+
+ - random bits and pieces
+
+
+Patch submission notes
+----------------------
+
+Selecting the tree/branch
+^^^^^^^^^^^^^^^^^^^^^^^^^
+
+In general, development against the head of the tip tree master branch is
+fine, but for the subsystems which are maintained separately, have their
+own git tree and are only aggregated into the tip tree, development should
+take place against the relevant subsystem tree or branch.
+
+Bug fixes which target mainline should always be applicable against the
+mainline kernel tree. Potential conflicts against changes which are already
+queued in the tip tree are handled by the maintainers.
+
+Patch subject
+^^^^^^^^^^^^^
+
+The tip tree preferred format for patch subject prefixes is
+'subsys/component:', e.g. 'x86/apic:', 'x86/mm/fault:', 'sched/fair:',
+'genirq/core:'. Please do not use file names or complete file paths as
+prefix. 'git log path/to/file' should give you a reasonable hint in most
+cases.
+
+The condensed patch description in the subject line should start with a
+uppercase letter and should be written in imperative tone.
+
+
+Changelog
+^^^^^^^^^
+
+The general rules about changelogs in the process documentation, see
+:ref:`Documentation/process/ <submittingpatches>`, apply.
+
+The tip tree maintainers set value on following these rules, especially on
+the request to write changelogs in imperative mood and not impersonating
+code or the execution of it. This is not just a whim of the
+maintainers. Changelogs written in abstract words are more precise and
+tend to be less confusing than those written in the form of novels.
+
+It's also useful to structure the changelog into several paragraphs and not
+lump everything together into a single one. A good structure is to explain
+the context, the problem and the solution in separate paragraphs and this
+order.
+
+Examples for illustration:
+
+ Example 1::
+
+ x86/intel_rdt/mbm: Fix MBM overflow handler during hot cpu
+
+ When a CPU is dying, we cancel the worker and schedule a new worker on a
+ different CPU on the same domain. But if the timer is already about to
+ expire (say 0.99s) then we essentially double the interval.
+
+ We modify the hot cpu handling to cancel the delayed work on the dying
+ cpu and run the worker immediately on a different cpu in same domain. We
+ donot flush the worker because the MBM overflow worker reschedules the
+ worker on same CPU and scans the domain->cpu_mask to get the domain
+ pointer.
+
+ Improved version::
+
+ x86/intel_rdt/mbm: Fix MBM overflow handler during CPU hotplug
+
+ When a CPU is dying, the overflow worker is canceled and rescheduled on a
+ different CPU in the same domain. But if the timer is already about to
+ expire this essentially doubles the interval which might result in a non
+ detected overflow.
+
+ Cancel the overflow worker and reschedule it immediately on a different CPU
+ in the same domain. The work could be flushed as well, but that would
+ reschedule it on the same CPU.
+
+ Example 2::
+
+ time: POSIX CPU timers: Ensure that variable is initialized
+
+ If cpu_timer_sample_group returns -EINVAL, it will not have written into
+ *sample. Checking for cpu_timer_sample_group's return value precludes the
+ potential use of an uninitialized value of now in the following block.
+ Given an invalid clock_idx, the previous code could otherwise overwrite
+ *oldval in an undefined manner. This is now prevented. We also exploit
+ short-circuiting of && to sample the timer only if the result will
+ actually be used to update *oldval.
+
+ Improved version::
+
+ posix-cpu-timers: Make set_process_cpu_timer() more robust
+
+ Because the return value of cpu_timer_sample_group() is not checked,
+ compilers and static checkers can legitimately warn about a potential use
+ of the uninitialized variable 'now'. This is not a runtime issue as all
+ call sites hand in valid clock ids.
+
+ Also cpu_timer_sample_group() is invoked unconditionally even when the
+ result is not used because *oldval is NULL.
+
+ Make the invocation conditional and check the return value.
+
+ Example 3::
+
+ The entity can also be used for other purposes.
+
+ Let's rename it to be more generic.
+
+ Improved version::
+
+ The entity can also be used for other purposes.
+
+ Rename it to be more generic.
+
+
+For complex scenarios, especially race conditions and memory ordering
+issues, it is valuable to depict the scenario with a table which shows
+the parallelism and the temporal order of events. Here is an example::
+
+ CPU0 CPU1
+ free_irq(X) interrupt X
+ spin_lock(desc->lock)
+ wake irq thread()
+ spin_unlock(desc->lock)
+ spin_lock(desc->lock)
+ remove action()
+ shutdown_irq()
+ release_resources() thread_handler()
+ spin_unlock(desc->lock) access released resources.
+ ^^^^^^^^^^^^^^^^^^^^^^^^^
+ synchronize_irq()
+
+Lockdep provides similar useful output to depict a possible deadlock
+scenario::
+
+ CPU0 CPU1
+ rtmutex_lock(&rcu->rt_mutex)
+ spin_lock(&rcu->rt_mutex.wait_lock)
+ local_irq_disable()
+ spin_lock(&timer->it_lock)
+ spin_lock(&rcu->mutex.wait_lock)
+ --> Interrupt
+ spin_lock(&timer->it_lock)
+
+
+Function references in changelogs
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+When a function is mentioned in the changelog, either the text body or the
+subject line, please use the format 'function_name()'. Omitting the
+brackets after the function name can be ambiguous::
+
+ Subject: subsys/component: Make reservation_count static
+
+ reservation_count is only used in reservation_stats. Make it static.
+
+The variant with brackets is more precise::
+
+ Subject: subsys/component: Make reservation_count() static
+
+ reservation_count() is only called from reservation_stats(). Make it
+ static.
+
+
+Backtraces in changelogs
+^^^^^^^^^^^^^^^^^^^^^^^^
+
+See :ref:`backtraces`.
+
+Ordering of commit tags
+^^^^^^^^^^^^^^^^^^^^^^^
+
+To have a uniform view of the commit tags, the tip maintainers use the
+following tag ordering scheme:
+
+ - Fixes: 12char-SHA1 ("sub/sys: Original subject line")
+
+ A Fixes tag should be added even for changes which do not need to be
+ backported to stable kernels, i.e. when addressing a recently introduced
+ issue which only affects tip or the current head of mainline. These tags
+ are helpful to identify the original commit and are much more valuable
+ than prominently mentioning the commit which introduced a problem in the
+ text of the changelog itself because they can be automatically
+ extracted.
+
+ The following example illustrates the difference::
+
+ Commit
+
+ abcdef012345678 ("x86/xxx: Replace foo with bar")
+
+ left an unused instance of variable foo around. Remove it.
+
+ Signed-off-by: J.Dev <j.dev@mail>
+
+ Please say instead::
+
+ The recent replacement of foo with bar left an unused instance of
+ variable foo around. Remove it.
+
+ Fixes: abcdef012345678 ("x86/xxx: Replace foo with bar")
+ Signed-off-by: J.Dev <j.dev@mail>
+
+ The latter puts the information about the patch into the focus and
+ amends it with the reference to the commit which introduced the issue
+ rather than putting the focus on the original commit in the first place.
+
+ - Reported-by: ``Reporter <reporter@mail>``
+
+ - Originally-by: ``Original author <original-author@mail>``
+
+ - Suggested-by: ``Suggester <suggester@mail>``
+
+ - Co-developed-by: ``Co-author <co-author@mail>``
+
+ Signed-off: ``Co-author <co-author@mail>``
+
+ Note, that Co-developed-by and Signed-off-by of the co-author(s) must
+ come in pairs.
+
+ - Signed-off-by: ``Author <author@mail>``
+
+ The first Signed-off-by (SOB) after the last Co-developed-by/SOB pair is the
+ author SOB, i.e. the person flagged as author by git.
+
+ - Signed-off-by: ``Patch handler <handler@mail>``
+
+ SOBs after the author SOB are from people handling and transporting
+ the patch, but were not involved in development. SOB chains should
+ reflect the **real** route a patch took as it was propagated to us,
+ with the first SOB entry signalling primary authorship of a single
+ author. Acks should be given as Acked-by lines and review approvals
+ as Reviewed-by lines.
+
+ If the handler made modifications to the patch or the changelog, then
+ this should be mentioned **after** the changelog text and **above**
+ all commit tags in the following format::
+
+ ... changelog text ends.
+
+ [ handler: Replaced foo by bar and updated changelog ]
+
+ First-tag: .....
+
+ Note the two empty new lines which separate the changelog text and the
+ commit tags from that notice.
+
+ If a patch is sent to the mailing list by a handler then the author has
+ to be noted in the first line of the changelog with::
+
+ From: Author <author@mail>
+
+ Changelog text starts here....
+
+ so the authorship is preserved. The 'From:' line has to be followed
+ by a empty newline. If that 'From:' line is missing, then the patch
+ would be attributed to the person who sent (transported, handled) it.
+ The 'From:' line is automatically removed when the patch is applied
+ and does not show up in the final git changelog. It merely affects
+ the authorship information of the resulting Git commit.
+
+ - Tested-by: ``Tester <tester@mail>``
+
+ - Reviewed-by: ``Reviewer <reviewer@mail>``
+
+ - Acked-by: ``Acker <acker@mail>``
+
+ - Cc: ``cc-ed-person <person@mail>``
+
+ If the patch should be backported to stable, then please add a '``Cc:
+ stable@xxxxxxxxxxxxxxx``' tag, but do not Cc stable when sending your
+ mail.
+
+ - Link: ``https://link/to/information``
+
+ For referring to an email on LKML or other kernel mailing lists,
+ please use the lkml.kernel.org redirector URL::
+
+ https://lkml.kernel.org/r/email-message@id
+
+ The kernel.org redirector is considered a stable URL, unlike other email
+ archives.
+
+ Maintainers will add a Link tag referencing the email of the patch
+ submission when they apply a patch to the tip tree. This tag is useful
+ for later reference and is also used for commit notifications.
+
+Please do not use combined tags, e.g. ``Reported-and-tested-by``, as
+they just complicate automated extraction of tags.
+
+
+Links to documentation
+^^^^^^^^^^^^^^^^^^^^^^
+
+Providing links to documentation in the changelog is a great help to later
+debugging and analysis. Unfortunately, URLs often break very quickly
+because companies restructure their websites frequently. Non-'volatile'
+exceptions include the Intel SDM and the AMD APM.
+
+Therefore, for 'volatile' documents, please create an entry in the kernel
+bugzilla https://bugzilla.kernel.org and attach a copy of these documents
+to the bugzilla entry. Finally, provide the URL of the bugzilla entry in
+the changelog.
+
+Patch resend or reminders
+^^^^^^^^^^^^^^^^^^^^^^^^^
+
+See :ref:`resend_reminders`.
+
+Merge window
+^^^^^^^^^^^^
+
+Please do not expect large patch series to be handled during the merge
+window or even during the week before. Such patches should be submitted in
+mergeable state *at* *least* a week before the merge window opens.
+Exceptions are made for bug fixes and *sometimes* for small standalone
+drivers for new hardware or minimally invasive patches for hardware
+enablement.
+
+During the merge window, the maintainers instead focus on following the
+upstream changes, fixing merge window fallout, collecting bug fixes, and
+allowing themselves a breath. Please respect that.
+
+The release candidate -rc1 is the starting point for new patches to be
+applied which are targeted for the next merge window.
+
+
+Git
+^^^
+
+The tip maintainers accept git pull requests from maintainers who provide
+subsystem changes for aggregation in the tip tree.
+
+Pull requests for new patch submissions are usually not accepted and do not
+replace proper patch submission to the mailing list. The main reason for
+this is that the review workflow is email based.
+
+If you submit a larger patch series it is helpful to provide a git branch
+in a private repository which allows interested people to easily pull the
+series for testing. The usual way to offer this is a git URL in the cover
+letter of the patch series.
+
+
+Coding style notes
+------------------
+
+Comment style
+^^^^^^^^^^^^^
+
+Sentences in comments start with an uppercase letter.
+
+Single line comments::
+
+ /* This is a single line comment */
+
+Multi-line comments::
+
+ /*
+ * This is a properly formatted
+ * multi-line comment.
+ *
+ * Larger multi-line comments should be split into paragraphs.
+ */
+
+No tail comments:
+
+ Please refrain from using tail comments. Tail comments disturb the
+ reading flow in almost all contexts, but especially in code::
+
+ if (somecondition_is_true) /* Don't put a comment here */
+ dostuff(); /* Neither here */
+
+ seed = MAGIC_CONSTANT; /* Nor here */
+
+ Use freestanding comments instead::
+
+ /* This condition is not obvious without a comment */
+ if (somecondition_is_true) {
+ /* This really needs to be documented */
+ dostuff();
+ }
+
+ /* This magic initialization needs a comment. Maybe not? */
+ seed = MAGIC_CONSTANT;
+
+Comment the important things:
+
+ Comments should be added where the operation is not obvious. Documenting
+ the obvious is just a distraction::
+
+ /* Decrement refcount and check for zero */
+ if (refcount_dec_and_test(&p->refcnt)) {
+ do;
+ lots;
+ of;
+ magic;
+ things;
+ }
+
+ Instead, comments should explain the non-obvious details and document
+ constraints::
+
+ if (refcount_dec_and_test(&p->refcnt)) {
+ /*
+ * Really good explanation why the magic things below
+ * need to be done, ordering and locking constraints,
+ * etc..
+ */
+ do;
+ lots;
+ of;
+ magic;
+ /* Needs to be the last operation because ... */
+ things;
+ }
+
+Function documentation comments:
+
+ To document functions and their arguments please use kernel-doc format
+ and not free form comments::
+
+ /**
+ * magic_function - Do lots of magic stuff
+ * @magic: Pointer to the magic data to operate on
+ * @offset: Offset in the data array of @magic
+ *
+ * Deep explanation of mysterious things done with @magic along
+ * with documentation of the return values.
+ *
+ * Note, that the argument descriptors above are arranged
+ * in a tabular fashion.
+ */
+
+ This applies especially to globally visible functions and inline
+ functions in public header files. It might be overkill to use kernel-doc
+ format for every (static) function which needs a tiny explanation. The
+ usage of descriptive function names often replaces these tiny comments.
+ Apply common sense as always.
+
+
+Documenting locking requirements
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+ Documenting locking requirements is a good thing, but comments are not
+ necessarily the best choice. Instead of writing::
+
+ /* Caller must hold foo->lock */
+ void func(struct foo *foo)
+ {
+ ...
+ }
+
+ Please use::
+
+ void func(struct foo *foo)
+ {
+ lockdep_assert_held(&foo->lock);
+ ...
+ }
+
+ In PROVE_LOCKING kernels, lockdep_assert_held() emits a warning
+ if the caller doesn't hold the lock. Comments can't do that.
+
+Bracket rules
+^^^^^^^^^^^^^
+
+Brackets should be omitted only if the statement which follows 'if', 'for',
+'while' etc. is truly a single line::
+
+ if (foo)
+ do_something();
+
+The following is not considered to be a single line statement even
+though C does not require brackets::
+
+ for (i = 0; i < end; i++)
+ if (foo[i])
+ do_something(foo[i]);
+
+Adding brackets around the outer loop enhances the reading flow::
+
+ for (i = 0; i < end; i++) {
+ if (foo[i])
+ do_something(foo[i]);
+ }
+
+
+Variable declarations
+^^^^^^^^^^^^^^^^^^^^^
+
+The preferred ordering of variable declarations at the beginning of a
+function is reverse fir tree order::
+
+ struct long_struct_name *descriptive_name;
+ unsigned long foo, bar;
+ unsigned int tmp;
+ int ret;
+
+The above is faster to parse than the reverse ordering::
+
+ int ret;
+ unsigned int tmp;
+ unsigned long foo, bar;
+ struct long_struct_name *descriptive_name;
+
+And even more so than random ordering::
+
+ unsigned long foo, bar;
+ int ret;
+ struct long_struct_name *descriptive_name;
+ unsigned int tmp;
+
+Also please try to aggregate variables of the same type into a single
+line. There is no point in wasting screen space::
+
+ unsigned long a;
+ unsigned long b;
+ unsigned long c;
+ unsigned long d;
+
+It's really sufficient to do::
+
+ unsigned long a, b, c, d;
+
+Please also refrain from introducing line splits in variable declarations::
+
+ struct long_struct_name *descriptive_name = container_of(bar,
+ struct long_struct_name,
+ member);
+ struct foobar foo;
+
+It's way better to move the initialization to a separate line after the
+declarations::
+
+ struct long_struct_name *descriptive_name;
+ struct foobar foo;
+
+ descriptive_name = container_of(bar, struct long_struct_name, member);
+
+
+Variable types
+^^^^^^^^^^^^^^
+
+Please use the proper u8, u16, u32, u64 types for variables which are meant
+to describe hardware or are used as arguments for functions which access
+hardware. These types are clearly defining the bit width and avoid
+truncation, expansion and 32/64-bit confusion.
+
+u64 is also recommended in code which would become ambiguous for 32-bit
+kernels when 'unsigned long' would be used instead. While in such
+situations 'unsigned long long' could be used as well, u64 is shorter
+and also clearly shows that the operation is required to be 64 bits wide
+independent of the target CPU.
+
+Please use 'unsigned int' instead of 'unsigned'.
+
+
+Constants
+^^^^^^^^^
+
+Please do not use literal (hexa)decimal numbers in code or initializers.
+Either use proper defines which have descriptive names or consider using
+an enum.
+
+
+Struct declarations and initializers
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+Struct declarations should align the struct member names in a tabular
+fashion::
+
+ struct bar_order {
+ unsigned int guest_id;
+ int ordered_item;
+ struct menu *menu;
+ };
+
+Please avoid documenting struct members within the declaration, because
+this often results in strangely formatted comments and the struct members
+become obfuscated::
+
+ struct bar_order {
+ unsigned int guest_id; /* Unique guest id */
+ int ordered_item;
+ /* Pointer to a menu instance which contains all the drinks */
+ struct menu *menu;
+ };
+
+Instead, please consider using the kernel-doc format in a comment preceding
+the struct declaration, which is easier to read and has the added advantage
+of including the information in the kernel documentation, for example, as
+follows::
+
+
+ /**
+ * struct bar_order - Description of a bar order
+ * @guest_id: Unique guest id
+ * @ordered_item: The item number from the menu
+ * @menu: Pointer to the menu from which the item
+ * was ordered
+ *
+ * Supplementary information for using the struct.
+ *
+ * Note, that the struct member descriptors above are arranged
+ * in a tabular fashion.
+ */
+ struct bar_order {
+ unsigned int guest_id;
+ int ordered_item;
+ struct menu *menu;
+ };
+
+Static struct initializers must use C99 initializers and should also be
+aligned in a tabular fashion::
+
+ static struct foo statfoo = {
+ .a = 0,
+ .plain_integer = CONSTANT_DEFINE_OR_ENUM,
+ .bar = &statbar,
+ };
+
+Note that while C99 syntax allows the omission of the final comma,
+we recommend the use of a comma on the last line because it makes
+reordering and addition of new lines easier, and makes such future
+patches slightly easier to read as well.
+
+Line breaks
+^^^^^^^^^^^
+
+Restricting line length to 80 characters makes deeply indented code hard to
+read. Consider breaking out code into helper functions to avoid excessive
+line breaking.
+
+The 80 character rule is not a strict rule, so please use common sense when
+breaking lines. Especially format strings should never be broken up.
+
+When splitting function declarations or function calls, then please align
+the first argument in the second line with the first argument in the first
+line::
+
+ static int long_function_name(struct foobar *barfoo, unsigned int id,
+ unsigned int offset)
+ {
+
+ if (!id) {
+ ret = longer_function_name(barfoo, DEFAULT_BARFOO_ID,
+ offset);
+ ...
+
+Namespaces
+^^^^^^^^^^
+
+Function/variable namespaces improve readability and allow easy
+grepping. These namespaces are string prefixes for globally visible
+function and variable names, including inlines. These prefixes should
+combine the subsystem and the component name such as 'x86_comp\_',
+'sched\_', 'irq\_', and 'mutex\_'.
+
+This also includes static file scope functions that are immediately put
+into globally visible driver templates - it's useful for those symbols
+to carry a good prefix as well, for backtrace readability.
+
+Namespace prefixes may be omitted for local static functions and
+variables. Truly local functions, only called by other local functions,
+can have shorter descriptive names - our primary concern is greppability
+and backtrace readability.
+
+Please note that 'xxx_vendor\_' and 'vendor_xxx_` prefixes are not
+helpful for static functions in vendor-specific files. After all, it
+is already clear that the code is vendor-specific. In addition, vendor
+names should only be for truly vendor-specific functionality.
+
+As always apply common sense and aim for consistency and readability.
+
+
+Commit notifications
+--------------------
+
+The tip tree is monitored by a bot for new commits. The bot sends an email
+for each new commit to a dedicated mailing list
+(``linux-tip-commits@xxxxxxxxxxxxxxx``) and Cc's all people who are
+mentioned in one of the commit tags. It uses the email message ID from the
+Link tag at the end of the tag list to set the In-Reply-To email header so
+the message is properly threaded with the patch submission email.
+
+The tip maintainers and submaintainers try to reply to the submitter
+when merging a patch, but they sometimes forget or it does not fit the
+workflow of the moment. While the bot message is purely mechanical, it
+also implies a 'Thank you! Applied.'.
diff --git a/Documentation/process/submitting-patches.rst b/Documentation/process/submitting-patches.rst
index f5ae1efd8cb6..21125d299ce6 100644
--- a/Documentation/process/submitting-patches.rst
+++ b/Documentation/process/submitting-patches.rst
@@ -330,6 +330,7 @@ politely and address the problems they have pointed out.
See Documentation/process/email-clients.rst for recommendations on email
clients and mailing list etiquette.
+.. _resend_reminders:
Don't get discouraged - or impatient
------------------------------------
@@ -715,6 +716,8 @@ patch::
See more details on the proper patch format in the following
references.
+.. _backtraces:
+
Backtraces in commit mesages
^^^^^^^^^^^^^^^^^^^^^^^^^^^^
--
2.29.2