[PATCH] arm64: dts: imx8mq-kontron-pitx-imx8m: remove vqmmc-supply node

[Heiko Thiery]

The sw4 output (V_1V8_S0 voltage) from the PMIC is also used as supply
for the eMMC. This voltage can not be changed and is not allowed to
switched off. So we do not want to provide this regulator to the SDHC
driver to control this voltage.

Signed-off-by: Heiko Thiery <heiko.thiery@xxxxxxxxx>
---
 arch/arm64/boot/dts/freescale/imx8mq-kontron-pitx-imx8m.dts | 1 -
 1 file changed, 1 deletion(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8mq-kontron-pitx-imx8m.dts b/arch/arm64/boot/dts/freescale/imx8mq-kontron-pitx-imx8m.dts
index f593e4ff62e1..436d98135ba9 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-kontron-pitx-imx8m.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mq-kontron-pitx-imx8m.dts
@@ -348,7 +348,6 @@
 	pinctrl-0 = <&pinctrl_usdhc1>;
 	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
 	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
-	vqmmc-supply = <&sw4_reg>;
 	bus-width = <8>;
 	non-removable;
 	no-sd;
-- 
2.20.1