Re: [PATCH] x86/64/mm: Map all kernel memory into trampoline_pgd

[Mike Rapoport]

On Mon, Sep 13, 2021 at 11:52:36AM +0200, Joerg Roedel wrote:
> From: Joerg Roedel <jroedel@xxxxxxx>
> 
> The trampoline_pgd only maps the 0xfffffff000000000-0xffffffffffffffff
> range of kernel memory (with 4-level paging). This range contains the
> kernels text+data+bss mappings and the module mapping space, but not the
> direct mapping and the vmalloc area.
> 
> This is enough to get an application processors out of real-mode, but
> for code that switches back to real-mode the trampoline_pgd is missing
> important parts of the address space. For example, consider this code
> from arch/x86/kernel/reboot.c, function machine_real_restart() for a
> 64-bit kernel:
> 
> 	#ifdef CONFIG_X86_32
> 		load_cr3(initial_page_table);
> 	#else
> 		write_cr3(real_mode_header->trampoline_pgd);
> 
> 		/* Exiting long mode will fail if CR4.PCIDE is set. */
> 		if (boot_cpu_has(X86_FEATURE_PCID))
> 			cr4_clear_bits(X86_CR4_PCIDE);
> 	#endif
> 
> 		/* Jump to the identity-mapped low memory code */
> 	#ifdef CONFIG_X86_32
> 		asm volatile("jmpl *%0" : :
> 			     "rm" (real_mode_header->machine_real_restart_asm),
> 			     "a" (type));
> 	#else
> 		asm volatile("ljmpl *%0" : :
> 			     "m" (real_mode_header->machine_real_restart_asm),
> 			     "D" (type));
> 	#endif
> 
> The code switches to the trampoline_pgd, which unmaps the direct mapping
> and also the kernel stack. The call to cr4_clear_bits() will find no
> stack and crash the machine. The real_mode_header pointer below points
> into the direct mapping, and dereferencing it also causes a crash.
> 
> The reason this does not crash always is only that kernel mappings are
> global and the CR3 switch does not flush those mappings. But if theses
> mappings are not in the TLB already, the above code will crash before it
> can jump to the real-mode stub.
> 
> Extend the trampoline_pgd to contain all kernel mappings to prevent
> these crashes and to make code which runs on this page-table more
> robust.
>
> Cc: stable@xxxxxxxxxxxxxxx
> Signed-off-by: Joerg Roedel <jroedel@xxxxxxx>
> ---
>  arch/x86/realmode/init.c | 12 +++++++++++-
>  1 file changed, 11 insertions(+), 1 deletion(-)
> 
> diff --git a/arch/x86/realmode/init.c b/arch/x86/realmode/init.c
> index 31b5856010cb..7a08c96cb42a 100644
> --- a/arch/x86/realmode/init.c
> +++ b/arch/x86/realmode/init.c
> @@ -72,6 +72,7 @@ static void __init setup_real_mode(void)
>  #ifdef CONFIG_X86_64
>  	u64 *trampoline_pgd;
>  	u64 efer;
> +	int i;
>  #endif
>  
>  	base = (unsigned char *)real_mode_header;
> @@ -128,8 +129,17 @@ static void __init setup_real_mode(void)
>  	trampoline_header->flags = 0;
>  
>  	trampoline_pgd = (u64 *) __va(real_mode_header->trampoline_pgd);
> +
> +	/*
> +	 * Map all of kernel memory into the trampoline PGD so that it includes
> +	 * the direct mapping and vmalloc space. This is needed to keep the
> +	 * stack and real_mode_header mapped when switching to this page table.
> +	 */
> +	for (i = pgd_index(__PAGE_OFFSET); i < PTRS_PER_PGD; i++)
> +		trampoline_pgd[i] = init_top_pgt[i].pgd;

Don't we need to update the trampoline_pgd in sync_global_pgds() as well?

> +
> +	/* Map the real mode stub as virtual == physical */
>  	trampoline_pgd[0] = trampoline_pgd_entry.pgd;
> -	trampoline_pgd[511] = init_top_pgt[511].pgd;
>  #endif
>  
>  	sme_sev_setup_real_mode(trampoline_header);
> -- 
> 2.33.0
> 

-- 
Sincerely yours,
Mike.