[PATCH v2] regulator: rtq6752: Enclose 'enable' gpio control by enable flag

[cy_huang]

From: ChiYuan Huang <cy_huang@xxxxxxxxxxx>

Fix 'enable' gpio control logic from the below cases if it's specified.

1. All off and both are sequentially controlled to be on.
The 'enable' gpio control block to be called twice including the delay time.

2. Both are on and one is preparing to be off.
The 'enable' gpio control low before register cache is configured to be true.

Signed-off-by: ChiYuan Huang <cy_huang@xxxxxxxxxxx>
---
v2
- Merge all comments into commit message.
---
 drivers/regulator/rtq6752-regulator.c | 18 +++++++++---------
 1 file changed, 9 insertions(+), 9 deletions(-)

diff --git a/drivers/regulator/rtq6752-regulator.c b/drivers/regulator/rtq6752-regulator.c
index 609d3fc..dfe45fb 100644
--- a/drivers/regulator/rtq6752-regulator.c
+++ b/drivers/regulator/rtq6752-regulator.c
@@ -54,14 +54,14 @@ static int rtq6752_set_vdd_enable(struct regulator_dev *rdev)
 	int rid = rdev_get_id(rdev), ret;
 
 	mutex_lock(&priv->lock);
-	if (priv->enable_gpio) {
-		gpiod_set_value(priv->enable_gpio, 1);
+	if (!priv->enable_flag) {
+		if (priv->enable_gpio) {
+			gpiod_set_value(priv->enable_gpio, 1);
 
-		usleep_range(RTQ6752_I2CRDY_TIMEUS,
-			     RTQ6752_I2CRDY_TIMEUS + 100);
-	}
+			usleep_range(RTQ6752_I2CRDY_TIMEUS,
+				     RTQ6752_I2CRDY_TIMEUS + 100);
+		}
 
-	if (!priv->enable_flag) {
 		regcache_cache_only(priv->regmap, false);
 		ret = regcache_sync(priv->regmap);
 		if (ret) {
@@ -91,11 +91,11 @@ static int rtq6752_set_vdd_disable(struct regulator_dev *rdev)
 	if (!priv->enable_flag) {
 		regcache_cache_only(priv->regmap, true);
 		regcache_mark_dirty(priv->regmap);
-	}
 
-	if (priv->enable_gpio)
-		gpiod_set_value(priv->enable_gpio, 0);
+		if (priv->enable_gpio)
+			gpiod_set_value(priv->enable_gpio, 0);
 
+	}
 	mutex_unlock(&priv->lock);
 
 	return 0;
-- 
2.7.4