Re: [PATCH 5.14 147/334] drm/bridge: ti-sn65dsi86: Dont read EDID blob over DDC

[Greg Kroah-Hartman]

On Mon, Sep 13, 2021 at 09:31:03AM -0700, Doug Anderson wrote:
> Hi,
> 
> On Mon, Sep 13, 2021 at 9:09 AM Greg Kroah-Hartman
> <gregkh@xxxxxxxxxxxxxxxxxxx> wrote:
> >
> > On Mon, Sep 13, 2021 at 06:57:20AM -0700, Doug Anderson wrote:
> > > Hi,
> > >
> > > On Mon, Sep 13, 2021 at 6:51 AM Greg Kroah-Hartman
> > > <gregkh@xxxxxxxxxxxxxxxxxxx> wrote:
> > > >
> > > > From: Douglas Anderson <dianders@xxxxxxxxxxxx>
> > > >
> > > > [ Upstream commit a70e558c151043ce46a5e5999f4310e0b3551f57 ]
> > > >
> > > > This is really just a revert of commit 58074b08c04a ("drm/bridge:
> > > > ti-sn65dsi86: Read EDID blob over DDC"), resolving conflicts.
> > > >
> > > > The old code failed to read the EDID properly in a very important
> > > > case: before the bridge's pre_enable() was called. The way things need
> > > > to work:
> > > > 1. Read the EDID.
> > > > 2. Based on the EDID, decide on video settings and pixel clock.
> > > > 3. Enable the bridge w/ the desired settings.
> > > >
> > > > The way things were working:
> > > > 1. Try to read the EDID but fail; fall back to hardcoded values.
> > > > 2. Based on hardcoded values, decide on video settings and pixel clock.
> > > > 3. Enable the bridge w/ the desired settings.
> > > > 4. Try again to read the EDID, it works now!
> > > > 5. Realize that the hardcoded settings weren't quite right.
> > > > 6. Disable / reenable the bridge w/ the right settings.
> > > >
> > > > The reasons for the failures were twofold:
> > > > a) Since we never ran the bridge chip's pre-enable then we never set
> > > >    the bit to ignore HPD. This meant the bridge chip didn't even _try_
> > > >    to go out on the bus and communicate with the panel.
> > > > b) Even if we fixed things to ignore HPD, the EDID still wouldn't read
> > > >    if the panel wasn't on.
> > > >
> > > > Instead of reverting the code, we could fix it to set the HPD bit and
> > > > also power on the panel. However, it also works nicely to just let the
> > > > panel code read the EDID. Now that we've split the driver up we can
> > > > expose the DDC AUX channel bus to the panel node. The panel can take
> > > > charge of reading the EDID.
> > > >
> > > > NOTE: in order for things to work, anyone that needs to read the EDID
> > > > will need to instantiate their panel using the new DP AUX bus (AKA by
> > > > listing their panel under the "aux-bus" node of the bridge chip in the
> > > > device tree).
> > > >
> > > > In the future if we want to use the bridge chip to provide a full
> > > > external DP port (which won't have a panel) then we will have to
> > > > conditinally add EDID reading back in.
> > > >
> > > > Suggested-by: Andrzej Hajda <a.hajda@xxxxxxxxxxx>
> > > > Signed-off-by: Douglas Anderson <dianders@xxxxxxxxxxxx>
> > > > Reviewed-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
> > > > Link: https://patchwork.freedesktop.org/patch/msgid/20210611101711.v10.9.I9330684c25f65bb318eff57f0616500f83eac3cc@changeid
> > > > Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
> > > > ---
> > > >  drivers/gpu/drm/bridge/ti-sn65dsi86.c | 22 ----------------------
> > > >  1 file changed, 22 deletions(-)
> > >
> > > I guess it's not a huge deal, but I did respond to Sasha and request
> > > that this patch be dropped from the stable queue unless the whole big
> > > pile of patches was being backported. See:
> > >
> > > https://lore.kernel.org/lkml/CAD=FV=U2dGjeEzp+K1vnLTj8oPJ-GKBTTKz2XQ1OZ7QF_sTHuw@xxxxxxxxxxxxxx/
> > >
> > > I said:
> > >
> > > > I would suggest against backporting this one unless you're going to
> > > > backport the whole pile of DP AUX bus patches, which probably doesn't
> > > > make sense for stable. Even though the old EDID reading was broken for
> > > > the first read, it still worked for later reads. ...and the first read
> > > . didn't crash or anything--it just timed out.
> >
> > I see a "bunch" of patches for this driver in this -rc, did Sasha not
> > get them all?  If not, I can drop this one, but maybe it was needed for
> > the follow-on patches?
> 
> It's been a long journey trying to make this bridge work better. I
> think the easiest way to say it is that if you don't have the parent
> of ${SUBJECT} patch, AKA:
> 
> e0bbcc6233f7 drm/bridge: ti-sn65dsi86: Add support for the DP AUX bus
> 
> ...then you don't have DP AUX bus support and you shouldn't take
> ${SUBJECT} patch. If you have that patch and it compiles / builds then
> it means that you have all the proper dependencies. However, there are
> _a lot_ of dependencies and I wouldn't suggest picking them all to
> stable unless it's critical for someone.

I tried to drop this one, and it turned out to be a depandancy for
another patch for this driver.  And that was another dependancy.  So
I've now dropped all of these from the queue.

Here are the commits I dropped.  If you think any should be added back,
please let us know:

05a7f4a8dff1 ("devlink: Break parameter notification sequence to be before/after unload/load driver")
e183bf31cf0d ("drm/bridge: ti-sn65dsi86: Add some 100 us delays")
c7782443a889 ("drm/bridge: ti-sn65dsi86: Avoid creating multiple connectors")
a70e558c1510 ("drm/bridge: ti-sn65dsi86: Don't read EDID blob over DDC")
acb06210b096 ("drm/bridge: ti-sn65dsi86: Fix power off sequence")
4c1b3d94bf63 ("drm/bridge: ti-sn65dsi86: Improve probe errors with dev_err_probe()")
4e5763f03e10 ("drm/bridge: ti-sn65dsi86: Wrap panel with panel-bridge")

thanks,

greg k-h