Re: [PATCH v4 0/4] Make USB ports to work on HiKey960/970

[Mauro Carvalho Chehab]

Hi Rob,

Em Fri,  3 Sep 2021 11:28:31 +0200
Mauro Carvalho Chehab <mchehab+huawei@xxxxxxxxxx> escreveu:

> Hi Rob,
> 
> It follows the patchset adding a DT schema needed to power on and to
> use the integrated USB hub found on HiKey 960 and Hikey 970 boards.
> 
> Besides each board use a different chip for the hub,  on both they're
> controlled the same way. Such boards come with an integrated 4-port
> USB hub on it, set on what it seems to be a non-standard way: on both 
> implementations, the USB type-C port is used to detect the USB role.
> 
> When in host mode, the 3.3V power supply (VDD33 pins) for the hub
> are disabled. That disables the USB I/O on type-A ports.
> 
> When USB type-C is on device mode, the OTG is switched via a GPIO pin
> to device mode, and the hub is powered on.
> 
> A Type-C power supply line is also controlled depending on the role.

Gentile ping.

Regards,
Mauro
> 
> -
> 
> The entire series  which contains the remaining patches to support
> PCI and USB on HiKey970, and USB on HiKey960 is at:
> 
>     https://github.com/mchehab/linux/commits/linux-master
> 
> The patches needed by the USB on HiKey970 were already merged
> upstream. So, the above branch applies on the top of Linux master
> branch.
> 
> Tested on HiKey 960:
> 
> 	$ lsusb
> 	Bus 002 Device 002: ID 0424:5734 Standard Microsystems Corp. 
> 	Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
> 	Bus 001 Device 004: ID 0424:2740 Standard Microsystems Corp. 
> 	Bus 001 Device 003: ID 046d:c52b Logitech, Inc. Unifying Receiver
> 	Bus 001 Device 002: ID 0424:2734 Standard Microsystems Corp. 
> 	Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
> 
> Tested on HiKey 970:
> 	
> 	$ lsusb
> 	Bus 002 Device 002: ID 0451:8140 Texas Instruments, Inc. TUSB8041 4-Port Hub
> 	Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
> 	Bus 001 Device 003: ID 0a12:0001 Cambridge Silicon Radio, Ltd Bluetooth Dongle (HCI mode)
> 	Bus 001 Device 002: ID 0451:8142 Texas Instruments, Inc. TUSB8041 4-Port Hub
> 	Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
> 
> v4:
>   - Improved description at the DT schema;
>   - Use just one compatible, as there's no difference between
>     HiKey 960 and 970 with regards to how the hub should be
>     controlled;
>   - parse usb-role-switch property at the driver;
>   - make the properties that depends on usb-role-switch optional.
> 
> v3:
>   - The examples at the dt-bindings were updated to reflect
>     the actual DTS content and won't produce any warnings;
>   - Added John Stultz SoB to Hikey960 DTS patch;
>   - Added a patch for the mux hub driver for it to work with
>     the newer schema;
> 
> John Stultz (1):
>   arm64: dts: hisilicon: Add usb mux hub for hikey960
> 
> Mauro Carvalho Chehab (2):
>   misc: hisi_hikey_usb: change the DT schema
>   arm64: dts: hisilicon: Add usb mux hub for hikey970
> 
> Yu Chen (1):
>   dt-bindings: misc: add schema for USB hub on Kirin devices
> 
>  .../bindings/misc/hisilicon,hikey-usb.yaml    |  87 +++++++++++++
>  .../boot/dts/hisilicon/hi3660-hikey960.dts    |  35 +++++-
>  .../boot/dts/hisilicon/hi3670-hikey970.dts    |  23 ++++
>  drivers/misc/hisi_hikey_usb.c                 | 119 +++++++++---------
>  4 files changed, 206 insertions(+), 58 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/misc/hisilicon,hikey-usb.yaml
> 



Thanks,
Mauro