[PATCH 5.13 041/380] crypto: ccp - shutdown SEV firmware on kexec

[Greg Kroah-Hartman]

From: Brijesh Singh <brijesh.singh@xxxxxxx>

commit 5441a07a127f106c9936e4f9fa1a8a93e3f31828 upstream.

The commit 97f9ac3db6612 ("crypto: ccp - Add support for SEV-ES to the
PSP driver") added support to allocate Trusted Memory Region (TMR)
used during the SEV-ES firmware initialization. The TMR gets locked
during the firmware initialization and unlocked during the shutdown.
While the TMR is locked, access to it is disallowed.

Currently, the CCP driver does not shutdown the firmware during the
kexec reboot, leaving the TMR memory locked.

Register a callback to shutdown the SEV firmware on the kexec boot.

Fixes: 97f9ac3db6612 ("crypto: ccp - Add support for SEV-ES to the PSP driver")
Reported-by: Lucas Nussbaum <lucas.nussbaum@xxxxxxxx>
Tested-by: Lucas Nussbaum <lucas.nussbaum@xxxxxxxx>
Cc: <stable@xxxxxxxxxx>
Cc: Tom Lendacky <thomas.lendacky@xxxxxxx>
Cc: Joerg Roedel <jroedel@xxxxxxx>
Cc: Herbert Xu <herbert@xxxxxxxxxxxxxxxxxxx>
Cc: David Rientjes <rientjes@xxxxxxxxxx>
Signed-off-by: Brijesh Singh <brijesh.singh@xxxxxxx>
Acked-by: Tom Lendacky <thomas.lendacky@xxxxxxxxx>
Signed-off-by: Herbert Xu <herbert@xxxxxxxxxxxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
 drivers/crypto/ccp/sev-dev.c |   49 ++++++++++++++++++++-----------------------
 drivers/crypto/ccp/sp-pci.c  |   12 ++++++++++
 2 files changed, 35 insertions(+), 26 deletions(-)

--- a/drivers/crypto/ccp/sev-dev.c
+++ b/drivers/crypto/ccp/sev-dev.c
@@ -300,6 +300,9 @@ static int __sev_platform_shutdown_locke
 	struct sev_device *sev = psp_master->sev_data;
 	int ret;
 
+	if (sev->state == SEV_STATE_UNINIT)
+		return 0;
+
 	ret = __sev_do_cmd_locked(SEV_CMD_SHUTDOWN, NULL, error);
 	if (ret)
 		return ret;
@@ -1019,6 +1022,20 @@ e_err:
 	return ret;
 }
 
+static void sev_firmware_shutdown(struct sev_device *sev)
+{
+	sev_platform_shutdown(NULL);
+
+	if (sev_es_tmr) {
+		/* The TMR area was encrypted, flush it from the cache */
+		wbinvd_on_all_cpus();
+
+		free_pages((unsigned long)sev_es_tmr,
+			   get_order(SEV_ES_TMR_SIZE));
+		sev_es_tmr = NULL;
+	}
+}
+
 void sev_dev_destroy(struct psp_device *psp)
 {
 	struct sev_device *sev = psp->sev_data;
@@ -1026,6 +1043,8 @@ void sev_dev_destroy(struct psp_device *
 	if (!sev)
 		return;
 
+	sev_firmware_shutdown(sev);
+
 	if (sev->misc)
 		kref_put(&misc_dev->refcount, sev_exit);
 
@@ -1056,21 +1075,6 @@ void sev_pci_init(void)
 	if (sev_get_api_version())
 		goto err;
 
-	/*
-	 * If platform is not in UNINIT state then firmware upgrade and/or
-	 * platform INIT command will fail. These command require UNINIT state.
-	 *
-	 * In a normal boot we should never run into case where the firmware
-	 * is not in UNINIT state on boot. But in case of kexec boot, a reboot
-	 * may not go through a typical shutdown sequence and may leave the
-	 * firmware in INIT or WORKING state.
-	 */
-
-	if (sev->state != SEV_STATE_UNINIT) {
-		sev_platform_shutdown(NULL);
-		sev->state = SEV_STATE_UNINIT;
-	}
-
 	if (sev_version_greater_or_equal(0, 15) &&
 	    sev_update_firmware(sev->dev) == 0)
 		sev_get_api_version();
@@ -1115,17 +1119,10 @@ err:
 
 void sev_pci_exit(void)
 {
-	if (!psp_master->sev_data)
-		return;
-
-	sev_platform_shutdown(NULL);
+	struct sev_device *sev = psp_master->sev_data;
 
-	if (sev_es_tmr) {
-		/* The TMR area was encrypted, flush it from the cache */
-		wbinvd_on_all_cpus();
+	if (!sev)
+		return;
 
-		free_pages((unsigned long)sev_es_tmr,
-			   get_order(SEV_ES_TMR_SIZE));
-		sev_es_tmr = NULL;
-	}
+	sev_firmware_shutdown(sev);
 }
--- a/drivers/crypto/ccp/sp-pci.c
+++ b/drivers/crypto/ccp/sp-pci.c
@@ -241,6 +241,17 @@ e_err:
 	return ret;
 }
 
+static void sp_pci_shutdown(struct pci_dev *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct sp_device *sp = dev_get_drvdata(dev);
+
+	if (!sp)
+		return;
+
+	sp_destroy(sp);
+}
+
 static void sp_pci_remove(struct pci_dev *pdev)
 {
 	struct device *dev = &pdev->dev;
@@ -371,6 +382,7 @@ static struct pci_driver sp_pci_driver =
 	.id_table = sp_pci_table,
 	.probe = sp_pci_probe,
 	.remove = sp_pci_remove,
+	.shutdown = sp_pci_shutdown,
 	.driver.pm = &sp_pci_pm_ops,
 };